GB: Gauges - Performance Side Gauges

baktasht · 10-01-2008, 06:43 AM

This is a "pre order" sale. Expected delivery time for these is approximately the first week of November 2008. This sale is limited to 25 purchases. After 25 units have been paid for we will close this sale.

Normal price: $499
Pre-Order SALE Price: $349

To order CLICK HERE

Detailed installation instructions: CLICK HERE

Colors Available: Red and Blue

The all new EMSPowered high performance side gauges replace the OEM gauges on either side of the cluster. This is a great way to add the most accurate gauges on the market to your car while keeping that "OEM look" and not cluttering up your interior.

* The left side of our custom gauges reds fuel level and water temperature. User selectable option to put either one on top or bottom. Hot swappable via programming functions.

* The right side is available outputs with the options listed below. The outputs on the right side are also hot swappable so that you can switch which reading is on the top or bottom.

Options for right side gauge:
Combo 1: Oil pressure + Oil temperature
Combo 2: Boost level + Wideband O2
Combo 3: EGT + Wideband O2

FAQ:
Q: Will this work with my JDM, USDM, or Euro spec MR2?
A: Yes, these gauges are designed to work with any 1989-1999 SW20 MKII Toyota MR2

Q: Will this work with my 3sgte, 3sge, 5sfe, v6, or v8 swapped motor?
A: Yes, these gauges will work with any motor, as long as it is in an MR2

Q: Will I need additional sensors or are they included?
A: All sensors and senders for our boost, water temperature, oil temperature, oil pressure and EGT gauges are included. The fuel level gauge utilizes the OEM fuel level sender

Q: How does your wideband gauge work?
A: Our wideband gauge will accept any standard 0-5V input from any wideband controller that you already have. If you do not currently have a wideband controller we offer the Innovate LC-1 wideband O2 controller that you can purchase along with our gauges

Q: How long does it take for installation?
A: Depending on your level of experience installation can take anywhere from 45 minutes to a couple of hours

Q: Do I need an EGT controller if i get the EGT option?
A: We include the EGT controller with our package, so everything you need is included

Please get your orders in as soon as possible. We will be closing this pre-order group buy after 25 orders.

mr2boost · 10-05-2008, 11:18 PM

Warning feature for the Coolant temp or oil pressure/temp or EGT???

Looks like a pretty easy install, considering what I had done before your boost gauge was installed.

Daniel

baktasht · 10-05-2008, 11:27 PM

Quote:

Originally Posted by mr2boost

Warning feature for the Coolant temp or oil pressure/temp or EGT???

Looks like a pretty easy install, considering what I had done before your boost gauge was installed.

Daniel

They have a warning function that has user selectable low and high parameters and will flash the gauge display when the warning limit is reached.

mr2boost · 10-05-2008, 11:57 PM

Quote:

Originally Posted by baktasht

They have a warning function that has user selectable low and high parameters and will flash the gauge display when the warning limit is reached.

Awesome, thank you sir.

Oh boy, my wife is going to kill me. I will let you know something tomorrow.

Daniel

mr2boost · 10-06-2008, 04:38 PM

Okay I'm in for RED in Option #1 (oil temp/pressure). Refer to your PM.

THANKS!

Daniel

baktasht · 10-06-2008, 10:28 PM

Quote:

Originally Posted by mr2boost

Okay I'm in for RED in Option #1 (oil temp/pressure). Refer to your PM.

THANKS!

Daniel

Sounds good. Just replied to your PM.

MR2 Drifter · 10-07-2008, 12:48 AM

whats the EGT and wideband o2 ones do???

Gairloch · 10-07-2008, 03:57 AM

EGT = exhaust gas temperature. It tells you how hot the exhaust coming out of your car is and is a tuning tool in some circumstances.

The wideband O2 requires a special O2 sensor in your exhaust system that reads the oxygen content and some other things to tell you what your air to fuel ratios are. This is another tuning tool.

MR2 Drifter · 10-07-2008, 05:48 AM

^ I see, thanks for the info...

I already know people are going to want these gauges the same colors as there cars but I only see red?

These are nice but I think I'de rather get my car running right then to buy something I don't really need right now

baktasht · 10-07-2008, 05:54 AM

They are available in both blue and red. For a stock gauge cluster, red is going to be the best match.

MR2 Drifter · 10-07-2008, 06:04 AM

Would it be possible for you to put a video up on how the "flashing/warning" thing comes up???

(man i want this so bad, i gotta see how my money sitiuation turns out)

baktasht · 10-07-2008, 06:12 AM

Quote:

Originally Posted by MR2 Drifter

Would it be possible for you to put a video up on how the "flashing/warning" thing comes up???

(man i want this so bad, i gotta see how my money sitiuation turns out)

The prototype set has already been sent out to one our sponsored track cars, so I can't post a vid. It's pretty simple really, the display just flashes on & off when the user configured limit is reached.

Redstar · 10-07-2008, 10:46 AM

Cool product! I might have to rethink my gauge plans...

baktasht · 10-08-2008, 07:21 AM

Get your orders in guys. After these are gone, the GB will be closed and this price will no longer be available.

lateralG's · 10-08-2008, 06:12 PM

looking at your picture, the left gauge shows water temp at 181 degrees and fuel level at
2 what???

baktasht · 10-08-2008, 06:14 PM

Quote:

Originally Posted by lateralG's

looking at your picture, the left gauge shows water temp at 181 degrees and fuel level at
2 what???

In the pictures they're not actually hooked up to a car. They're simply hooked up to test equipment to show the displays.

lateralG's · 10-09-2008, 01:42 AM

so what does it read? does it show what fraction of tank is left (1/4 or 7/8 or ??) or does it read % left in tank, or does it give actual gallons in tank, and if so, does it go to tenth of a gal or quarts or ???

baktasht · 10-09-2008, 06:11 AM

Quote:

Originally Posted by lateralG's

so what does it read? does it show what fraction of t

10-01-2008, 06:43 AM	#1 (permalink)
baktasht EMSPowered.com Join Date: Oct 2005 Location: Austin, TX Posts: 3,764 Thanks: 15 Thanked 95 Times in 83 Posts My Google Map iTrader Rating: (25/100% )	GB: Gauges - Performance Side Gauges This is a "pre order" sale. Expected delivery time for these is approximately the first week of November 2008. This sale is limited to 25 purchases. After 25 units have been paid for we will close this sale. Normal price: $499 Pre-Order SALE Price: $349 To order CLICK HERE Detailed installation instructions: CLICK HERE Colors Available: Red and Blue The all new EMSPowered high performance side gauges replace the OEM gauges on either side of the cluster. This is a great way to add the most accurate gauges on the market to your car while keeping that "OEM look" and not cluttering up your interior. * The left side of our custom gauges reds fuel level and water temperature. User selectable option to put either one on top or bottom. Hot swappable via programming functions. * The right side is available outputs with the options listed below. The outputs on the right side are also hot swappable so that you can switch which reading is on the top or bottom. Options for right side gauge: Combo 1: Oil pressure + Oil temperature Combo 2: Boost level + Wideband O2 Combo 3: EGT + Wideband O2 FAQ: Q: Will this work with my JDM, USDM, or Euro spec MR2? A: Yes, these gauges are designed to work with any 1989-1999 SW20 MKII Toyota MR2 Q: Will this work with my 3sgte, 3sge, 5sfe, v6, or v8 swapped motor? A: Yes, these gauges will work with any motor, as long as it is in an MR2 Q: Will I need additional sensors or are they included? A: All sensors and senders for our boost, water temperature, oil temperature, oil pressure and EGT gauges are included. The fuel level gauge utilizes the OEM fuel level sender Q: How does your wideband gauge work? A: Our wideband gauge will accept any standard 0-5V input from any wideband controller that you already have. If you do not currently have a wideband controller we offer the Innovate LC-1 wideband O2 controller that you can purchase along with our gauges Q: How long does it take for installation? A: Depending on your level of experience installation can take anywhere from 45 minutes to a couple of hours Q: Do I need an EGT controller if i get the EGT option? A: We include the EGT controller with our package, so everything you need is included Please get your orders in as soon as possible. We will be closing this pre-order group buy after 25 orders.

10-07-2008, 03:57 AM	#8 (permalink)
Gairloch Dreaming of apexes Join Date: Aug 2005 Location: Minneapolis, MN Posts: 4,426 Thanks: 114 Thanked 219 Times in 192 Posts My Google Map iTrader Rating: (7/100% )	EGT = exhaust gas temperature. It tells you how hot the exhaust coming out of your car is and is a tuning tool in some circumstances. The wideband O2 requires a special O2 sensor in your exhaust system that reads the oxygen content and some other things to tell you what your air to fuel ratios are. This is another tuning tool. __________________ "Inside the car, the world beyond the driver's immediate horizon ceases to exist. Alone with the solitude of his desire, survival sense numbed by the speed, he's outrun the mediocrity of the outside world, slipped the shackles it tries to clamp on us all. He is running free, chased only by a fear of failure, for failure is to risk ejection into the real world." ~Mark Hughes

10-05-2008, 11:18 PM	#2 (permalink)
mr2boost 343 Gone NEVER Forgotten Join Date: Sep 2005 Location: Bartlett, TN Posts: 367 Thanks: 0 Thanked 29 Times in 24 Posts iTrader Rating: (0/0% )	Warning feature for the Coolant temp or oil pressure/temp or EGT??? Looks like a pretty easy install, considering what I had done before your boost gauge was installed. Daniel

10-06-2008, 04:38 PM	#5 (permalink)
mr2boost 343 Gone NEVER Forgotten Join Date: Sep 2005 Location: Bartlett, TN Posts: 367 Thanks: 0 Thanked 29 Times in 24 Posts iTrader Rating: (0/0% )	Okay I'm in for RED in Option #1 (oil temp/pressure). Refer to your PM. THANKS! Daniel

10-07-2008, 12:48 AM	#7 (permalink)
MR2 Drifter No Drifting Skills Join Date: Jun 2008 Location: Chicago Posts: 503 Thanks: 3 Thanked 2 Times in 2 Posts iTrader Rating: (1/100% )	whats the EGT and wideband o2 ones do???

10-07-2008, 05:48 AM	#9 (permalink)
MR2 Drifter No Drifting Skills Join Date: Jun 2008 Location: Chicago Posts: 503 Thanks: 3 Thanked 2 Times in 2 Posts iTrader Rating: (1/100% )	^ I see, thanks for the info... I already know people are going to want these gauges the same colors as there cars but I only see red? These are nice but I think I'de rather get my car running right then to buy something I don't really need right now

10-07-2008, 05:54 AM	#10 (permalink)
baktasht EMSPowered.com Join Date: Oct 2005 Location: Austin, TX Posts: 3,764 Thanks: 15 Thanked 95 Times in 83 Posts My Google Map iTrader Rating: (25/100% )	They are available in both blue and red. For a stock gauge cluster, red is going to be the best match.

10-07-2008, 06:04 AM	#11 (permalink)
MR2 Drifter No Drifting Skills Join Date: Jun 2008 Location: Chicago Posts: 503 Thanks: 3 Thanked 2 Times in 2 Posts iTrader Rating: (1/100% )	Would it be possible for you to put a video up on how the "flashing/warning" thing comes up??? (man i want this so bad, i gotta see how my money sitiuation turns out)

10-07-2008, 10:46 AM	#13 (permalink)
Redstar My other cars are jealous Join Date: Feb 2007 Location: Bellingham, WA Posts: 163 Thanks: 9 Thanked 5 Times in 5 Posts iTrader Rating: (6/100% )	Cool product! I might have to rethink my gauge plans...

10-08-2008, 07:21 AM	#14 (permalink)
baktasht EMSPowered.com Join Date: Oct 2005 Location: Austin, TX Posts: 3,764 Thanks: 15 Thanked 95 Times in 83 Posts My Google Map iTrader Rating: (25/100% )	Get your orders in guys. After these are gone, the GB will be closed and this price will no longer be available.

10-08-2008, 06:12 PM	#15 (permalink)
lateralG's No Skills Join Date: Oct 2005 Location: Memphis, TN Posts: 47 Thanks: 1 Thanked 0 Times in 0 Posts iTrader Rating: (1/100% )	looking at your picture, the left gauge shows water temp at 181 degrees and fuel level at 2 what???

10-09-2008, 01:42 AM	#17 (permalink)
lateralG's No Skills Join Date: Oct 2005 Location: Memphis, TN Posts: 47 Thanks: 1 Thanked 0 Times in 0 Posts iTrader Rating: (1/100% )	so what does it read? does it show what fraction of tank is left (1/4 or 7/8 or ??) or does it read % left in tank, or does it give actual gallons in tank, and if so, does it go to tenth of a gal or quarts or ???