MR2 Guru brings you the first Brian Crower Cams for 3S-GTE!!

[Locofrancais MR2Guru]

One year ago, we at MR2 Guru decided to broaden our market and delve more into Research and Development. To date we have helped develop more than 20 MR2 specific products, including but not limited to the NST Clutchless Supercharger Pulley for the 4AGZE, the only Synapse-sanctioned MR2 specific adapter for the Synchronic Blow Off Valve and now these never before released Brian Crower cams, valve springs, and retainers for the 3SGTE.

Brian Crower has assisted us in developing these cams for the 2nd and 3rd Generation 3SGTE with a strong partnership between power and affordability. Over the last year, we have worked tirelessly to ensure that these cams are able to reach the market - even in these trying economic times. When affordability is of the utmost importance, Brian Crower has taken the time and money to help us invest in this venture. Not only are we confident in the company and their ability to create competitive products, we also trust in their impeccable customer service and technical support.

Available in two popular durations, both perform as competitively as they are priced.

The 264 degree camshafts will be the most user friendly as well as cost effective. They are safe to use on the stock Gen 2 Shim-Over Bucket design and do not require a valve spring or retainer upgrade. The lift is slightly less aggressive than other brands to allow ease of use with an OE or ROM tuned ECU versus the the alternative necessity of a full EMS. These cams still have a slight lope at idle for that aggressive sound, yet they will perform with the most commendable street manners.



The 272 degree camshafts are some of the most aggressive on the market today. With a staggering amount of lift and a long duration, they scream for RPMs. These cams are so aggressive they will require the valve spring upgrade, in addition to a shim-under or shimless bucket design to be used. They are also intended for built/performance engines as they will require ECU and tuning modification. *These cams will create interference with piston and valve clearances, therefore we suggest a new timing kit with installation. 272s cannot be used with shim-over bucket.*

272 Degree Sound Clips =

YouTube - Brian Crower 272 Degree Camshafts in...

YouTube - Brian Crower 272 Degree Camshafts for...

The Valve Spring and Retainer kit adds the icing to the cake. Created for use with either set of cams, these springs have been designed for high RPMs; maintaining consistent/constant pressures throughout the power band. The retainers have been perfectly CNC machined from titanium for precise tolerances, with great attention to detail. *Retainers fit shim-over bucket and shimless bucket designs only. For shim-under bucket designs, use spring only.*





Unlike most Group Buys, these cams are a NEW product previously unreleased to the public. By assisting in the development, testing, and prototyping, MR2 Guru is the sole distributor of these cams until the close of this Group Buy. Being that we have relied on the MR2 community as much as it relies on us, we bring you the FIRST opportunity to purchase these products at discount pricing before their public release.

MSRP is going to be set at $592.60 for a set of 264 or 272 degree camshafts and $217.38 for the valve spring and retainer kit.

This Group Buy will be offering first release pricing and exclusivity to our supported forums for a minimum of TEN pre-paid sets.

Special Group Buy rates are as follows:

CAMS - $528 Set
VALVE SPRING AND RETAINER KIT - $187

These prices include shipping within the 48 States! I'm sorry, we do not ship overseas at this time.

THIS GROUP BUY WILL CLOSE ON JULY 31st 2009!! After that date we must raise our prices closer to the fair rates of other distributors!
We have one month to sell the minimum 10 paid sets to lock in this price rate before the closing date. All orders will be shipped within 14 days of GB Close.

All orders may be paid to MR2 Guru at sales@mr2guru.com via PayPal. We will also be accepting Credit Card (Visa, MasterCard, American Express, Discover) orders by phone for this Group Buy at (828) 254-7297 between 11am and 6pm Eastern.

MR2 Guru/Brian Crower Page

More Images Available Here

[countyboy3188]

do you have to buy the cams and the valve spring kits together or can you get them separate?

I would have def jumped on the whole deal but i just bought some hks 264s .

[Locofrancais MR2Guru]

You are welcome to buy them individually. This goes the same for the cams, since the 264s do not require the use of the valve spring retainer kit you will be able to purchase them separately.

The Valve Spring/Retainer Kit is available now.

[countyboy3188]

ok cool. I want to go ahead and upgrade the valvetrain since im not gonna keep the stock rev limit. Does that mean i will have to wait for the group buy to end to get them? lol

[Locofrancais MR2Guru]

Originally Posted by countyboy3188

ok cool. I want to go ahead and upgrade the valvetrain since im not gonna keep the stock rev limit. Does that mean i will have to wait for the group buy to end to get them? lol

No sir, you would not have to wait. If you would like a set of the valve springs and retainers I can order those now at the listed price.

[countyboy3188]

hm ok i will be ordering a set here in a week then.

[Locofrancais MR2Guru]

We can extend this group buy if there is still interest.

[stewart]

If this is like the half cut you ordered me it has to be a scam

[Zena]

MR2Guru: I tried looking at your site but it keeps asking for an ID/password. How do I do about looking at your for sale items?