Attn: Cupholders in Japan

PHOENIX · 04-24-2008, 01:43 AM

Have been discontinued and are completely sold out.

I cannot get them any more. I have been to 2 Toyota places and my personal source to confirm this. If you can find one new, I would recommend you purchase It immediately. If you find one new, and don't want to purchase it, please tell me about it so I can purchase it.

I don't even have one for myself.

here is the part number, if you can find one or can get them, please contact me.

08171-10060

And just so you guys know, Canadam has the last one. He was the last person that I sold one too, so if you want one really bad, go over to his house, beat the crap out of him, and take his cupholder. If you don't want the cupholder, ill pay you to go over there and beat the crap out of him and snag the cupholder for me.

mthreat · 04-24-2008, 02:04 AM

I thought they didn't beat people up in Canada?

Thanks for the effort, I know it was a lot of work on your part, driving around Japan for it!

eckoman_pdx · 04-24-2008, 02:23 AM

Quote:

Originally Posted by PHOENIX

Have been discontinued and are completely sold out.

I cannot get them any more. I have been to 2 Toyota places and my personal source to confirm this. If you can find one new, I would recommend you purchase It immediately. If you find one new, and don't want to purchase it, please tell me about it so I can purchase it.

I don't even have one for myself.

here is the part number, if you can find one or can get them, please contact me.

08171-10060

And just so you guys know, Canadam has the last one. He was the last person that I sold one too, so if you want one really bad, go over to his house, beat the crap out of him, and take his cupholder. If you don't want the cupholder, ill pay you to go over there and beat the crap out of him and snag the cupholder for me.

Nooooo!!! I wanted a cupholder dang it...no cup holder is killing me...

Well...there's always your opinion B...I might have to go to Canada...

Seriously though, that blows...I really did want to get a cupholder. A car with no cupholder sucks.

wagonis · 04-24-2008, 02:37 AM

Thanks again for trying Dave, I do appreciate everything you went through to try and get these for us. Since I'm too far from Canada I guess I'll stick with option C;

eckoman_pdx · 04-24-2008, 03:12 AM

Quote:

Originally Posted by wagonis

Thanks again for trying Dave, I do appreciate everything you went through to try and get these for us. Since I'm too far from Canada I guess I'll stick with option C;

http://www.care4car.com/productimage...0200%20pix.jpg

I've been stuck using option c for awhile...I hate it...plus once I tint my windows...option c becomes not an option. Not worth the risk of the cup holder arm scratching the tint...

wagonis · 04-24-2008, 03:14 AM

I hear that...need to buy bottled drinks.

eckoman_pdx · 04-24-2008, 03:21 AM

Quote:

Originally Posted by wagonis

I hear that...need to buy bottled drinks.

Yeah, I usually keep a few empty 20oz bottles around and wash them out/re-use them just for that reason...

wagonis · 04-24-2008, 03:30 AM

Try that with Gatorade bottles. They have a wider opening for better and easier filling up.

eckoman_pdx · 04-24-2008, 03:31 AM

Quote:

Originally Posted by wagonis

Try that with Gatorade bottles. They have a wider opening for better and easier filling up.

That's a good idea, thanks!

wagonis · 04-24-2008, 03:32 AM

You're welcome.

Timon · 04-24-2008, 03:55 AM

What about option D?

Also note, Gatorade bottles have issues with option D due to the width and bulkiness of them.

wagonis · 04-24-2008, 04:00 AM

kinda tough to do that since you have to drive a stick using both legs. If my deuce was an automatic then I would care less about a cup holder...

PearlJammzz · 04-24-2008, 07:28 AM

Quote:

Originally Posted by mthreat

I thought they didn't beat people up in Canada?

Thanks for the effort, I know it was a lot of work on your part, driving around Japan for it!

Oh, they do, lol. It's just more of a slap off really than a beating up. You know how them canucks are, all dainty and such :-p

55mr2 · 04-24-2008, 09:00 AM

Is this what everyone is talking about... I'll be sure to post some pics when I get it installed. Yeah Canada...

canadam · 04-24-2008, 09:45 AM

Thanks Phoenix.

The rest of you, bring it on

I'm working on coming up with an OEM cupholder option, I'll let you know what I find out in the near future if I can get around to it.

eckoman_pdx · 04-24-2008, 07:52 PM

Quote:

Originally Posted by canadam

Thanks Phoenix.

The rest of you, bring it on

I'm working on coming up with an OEM cupholder option, I'll let you know what I find out in the near future if I can get around to it.

Hehehe, dang you and your cupholder!! Seriously though, let us know if you actually figure anything out on that front...

Timon · 04-24-2008, 10:47 PM

Quote:

Originally Posted by wagonis

kinda tough to do that since you have to drive a stick using both legs. If my deuce was an automatic then I would care less about a cup holder...

My deuce is a stick and I can successfully pull off this type of cup holder with a 44 oz soda

. Just make sure you don't squeeze your legs together and you should be fine.

Real cup holders would be nice, but they are a hassle to get.

wagonis · 04-24-2008, 10:53 PM

Quote:

Originally Posted by Timon

Just make sure you don't squeeze your legs together and you should be fine.

And that's EXACTLEY what happened to me once while on my way to the airport...and there was nothing I could do about it.

Ended up looking like an idiot walking through the airport with a huge coffee stain on my crotch, so I bought a pair a pants once I got to Chicago so at least I won't look like an idiot at the clients site.

And all of this could have been avoided if I would have had a cup holder.

04-24-2008, 01:43 AM	#1 (permalink)
PHOENIX Beams Owners Group Join Date: Mar 2005 Location: Tachikawa, Japan Posts: 6,792 Thanks: 65 Thanked 191 Times in 145 Posts Blog Entries: 1 My Google Map iTrader Rating: (37/100% )	Attn: Cupholders in Japan Have been discontinued and are completely sold out. I cannot get them any more. I have been to 2 Toyota places and my personal source to confirm this. If you can find one new, I would recommend you purchase It immediately. If you find one new, and don't want to purchase it, please tell me about it so I can purchase it. I don't even have one for myself. here is the part number, if you can find one or can get them, please contact me. 08171-10060 And just so you guys know, Canadam has the last one. He was the last person that I sold one too, so if you want one really bad, go over to his house, beat the crap out of him, and take his cupholder. If you don't want the cupholder, ill pay you to go over there and beat the crap out of him and snag the cupholder for me. __________________ Moving to Eureka, California March 2009 Solid Side Mouldings in stock now! Normally I'm busy, this week I'm uber OMG to the 10th power busy, please be patient if your waiting on information from me.

04-24-2008, 03:55 AM	#11 (permalink)
Timon MR2 MKI AW11 Join Date: Feb 2008 Location: Utah Posts: 215 Thanks: 3 Thanked 11 Times in 10 Posts My Google Map iTrader Rating: (0/0% )	What about option D? Also note, Gatorade bottles have issues with option D due to the width and bulkiness of them. Last edited by Timon; 04-24-2008 at 04:01 AM.

04-24-2008, 02:04 AM	#2 (permalink)
mthreat Cage Fighter Join Date: May 2007 Location: Austin, TX Posts: 216 Thanks: 30 Thanked 14 Times in 10 Posts My Google Map iTrader Rating: (4/100% )	I thought they didn't beat people up in Canada? Thanks for the effort, I know it was a lot of work on your part, driving around Japan for it!

04-24-2008, 02:37 AM	#4 (permalink)
wagonis Cage Fighter Join Date: Jun 2006 Location: Tampa Bay area, FL Posts: 810 Thanks: 43 Thanked 13 Times in 13 Posts iTrader Rating: (4/100% )	Thanks again for trying Dave, I do appreciate everything you went through to try and get these for us. Since I'm too far from Canada I guess I'll stick with option C;

04-24-2008, 03:14 AM	#6 (permalink)
wagonis Cage Fighter Join Date: Jun 2006 Location: Tampa Bay area, FL Posts: 810 Thanks: 43 Thanked 13 Times in 13 Posts iTrader Rating: (4/100% )	I hear that...need to buy bottled drinks.

04-24-2008, 03:30 AM	#8 (permalink)
wagonis Cage Fighter Join Date: Jun 2006 Location: Tampa Bay area, FL Posts: 810 Thanks: 43 Thanked 13 Times in 13 Posts iTrader Rating: (4/100% )	Try that with Gatorade bottles. They have a wider opening for better and easier filling up.

04-24-2008, 03:32 AM	#10 (permalink)
wagonis Cage Fighter Join Date: Jun 2006 Location: Tampa Bay area, FL Posts: 810 Thanks: 43 Thanked 13 Times in 13 Posts iTrader Rating: (4/100% )	You're welcome.

04-24-2008, 04:00 AM	#12 (permalink)
wagonis Cage Fighter Join Date: Jun 2006 Location: Tampa Bay area, FL Posts: 810 Thanks: 43 Thanked 13 Times in 13 Posts iTrader Rating: (4/100% )	kinda tough to do that since you have to drive a stick using both legs. If my deuce was an automatic then I would care less about a cup holder...

04-24-2008, 09:00 AM	#14 (permalink)
55mr2 2Old2Give2Hoots Join Date: Jul 2007 Location: Winnipeg Posts: 314 Thanks: 9 Thanked 20 Times in 15 Posts My Google Map iTrader Rating: (2/100% )	Is this what everyone is talking about... I'll be sure to post some pics when I get it installed. Yeah Canada...

04-24-2008, 09:45 AM	#15 (permalink)
canadam MidshipExpress Join Date: Feb 2005 Location: Beautiful British Columbia Posts: 9,006 Thanks: 104 Thanked 118 Times in 104 Posts My Google Map iTrader Rating: (26/100% )	Thanks Phoenix. The rest of you, bring it on I'm working on coming up with an OEM cupholder option, I'll let you know what I find out in the near future if I can get around to it.

04-25-2008, 02:57 AM	#19 (permalink)
Derek Midnight Garage