help can i put Quad throttle bodies on my 88 4age na

nzracing · 03-30-2008, 04:55 AM

there are some Quad throttle bodies for sale and i have seen photos of them on 4age motors,so is it a big deal?do i use a 20v blace top ecu and what else,thanks

mr220v · 04-01-2008, 05:22 PM

There is an adapter will allow you to use itb's on the 16v. It's kindof expensive.

You will not be able to use the blacktop ecu. You'll need to go full standalone.

At the end of the day, it's cheaper to swap the whole 20v than to try and itb your 16v.

DarylP · 04-01-2008, 11:27 PM

Quote:

Originally Posted by mr220v

There is an adapter will allow you to use itb's on the 16v. It's kindof expensive.
You will not be able to use the blacktop ecu. You'll need to go full standalone.

At the end of the day, it's cheaper to swap the whole 20v than to try and itb your 16v.

This is the only adapter that I know of for installing ITB's on a 16 V Techno Toy Tuning - Your performance parts source for the old school cool!

Plus you need either a b/t or s/t ITB's another way of controlling fuel other than oem ecu.

nzracing · 04-02-2008, 12:18 AM

ok thanks for that i am looking at this motor as well 2TGEU/3TGTE Turbo Enigine for sale - TradeMe.co.nz - New Zealand

Early model 2TGEU with 3TGTE crank, conrods, pistons so making it 1800 DOHC TURBO.Crank has been re-ground with new oversize bearings, new rings and seals etc.This setup was running in my TE71 Corolla.Head removed as blown head gasket.

***PRICE LOWERED***
Last time on here if not sold i'll keep it.Would be nice to free up some space though!!!

Comes with:
3TGTE high volume oil pump (although modified for custom sump)
3TGTE injectors
3TGTE oil filter adaptor and oil feed line
flywheel
starter motor
engine mounts
coil/ignitor and locked disy
3TGTE exaust manifold
timing chain tensioner
3TGTE thermostat housing

Dosent have:
sump-(Should be getting 1 soon 4 it)
turbo
alternator
ecu or wiring

May be able to source turbo at exta cost if buyer requires.

F0Bman · 04-04-2008, 07:06 PM

Exactly what he said. HAHAHA. If you want to go ITB get the TechnoToyTuning adapter to fit the ITB on there. But I suggest getting the SmallPort engine first, faster velocity in the ports which equals lots of YUM. ITB to a stock engine doesn't do much, and you have to get a standalone anyways.

nzracing · 04-04-2008, 07:21 PM

cheers think i will give it a miss thanks for help

toy-driver · 04-05-2008, 12:49 PM

I might be a little late on this, but...

eBay Motors: 4AG Sidedraft Intake Manifold AW11 MR-2 AE86 (item 200213708299 end time Apr-11-08 21:15:41 PDT)

Not that expensive.

Capt.Evergreen · 04-11-2008, 01:28 AM

sick man... ITB's are a final touch to a built engines... any one heard of a stroker kit for the 4ag???? that would be nice...or a built bottom end?!?!Ive seen in modified mag. an ITB kit for $2000...but DAMN was it nice...

03-30-2008, 04:55 AM	#1 (permalink)
nzracing No Skills Join Date: Feb 2008 Posts: 9 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	help can i put Quad throttle bodies on my 88 4age na there are some Quad throttle bodies for sale and i have seen photos of them on 4age motors,so is it a big deal?do i use a 20v blace top ecu and what else,thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-01-2008, 05:22 PM	#2 (permalink)
mr220v Beams Owners Group Join Date: Mar 2006 Posts: 1,791 Thanks: 13 Thanked 139 Times in 117 Posts iTrader Rating: (9/100% )	There is an adapter will allow you to use itb's on the 16v. It's kindof expensive. You will not be able to use the blacktop ecu. You'll need to go full standalone. At the end of the day, it's cheaper to swap the whole 20v than to try and itb your 16v.

04-02-2008, 12:18 AM	#4 (permalink)
nzracing No Skills Join Date: Feb 2008 Posts: 9 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	ok thanks for that i am looking at this motor as well 2TGEU/3TGTE Turbo Enigine for sale - TradeMe.co.nz - New Zealand Early model 2TGEU with 3TGTE crank, conrods, pistons so making it 1800 DOHC TURBO.Crank has been re-ground with new oversize bearings, new rings and seals etc.This setup was running in my TE71 Corolla.Head removed as blown head gasket. *PRICE LOWERED* Last time on here if not sold i'll keep it.Would be nice to free up some space though!!! Comes with: 3TGTE high volume oil pump (although modified for custom sump) 3TGTE injectors 3TGTE oil filter adaptor and oil feed line flywheel starter motor engine mounts coil/ignitor and locked disy 3TGTE exaust manifold timing chain tensioner 3TGTE thermostat housing Dosent have: sump-(Should be getting 1 soon 4 it) turbo alternator ecu or wiring May be able to source turbo at exta cost if buyer requires.

04-04-2008, 07:06 PM	#5 (permalink)
F0Bman Cage Fighter Join Date: Mar 2008 Posts: 257 Thanks: 0 Thanked 3 Times in 3 Posts iTrader Rating: (0/0% )	Exactly what he said. HAHAHA. If you want to go ITB get the TechnoToyTuning adapter to fit the ITB on there. But I suggest getting the SmallPort engine first, faster velocity in the ports which equals lots of YUM. ITB to a stock engine doesn't do much, and you have to get a standalone anyways.

04-04-2008, 07:21 PM	#6 (permalink)
nzracing No Skills Join Date: Feb 2008 Posts: 9 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	cheers think i will give it a miss thanks for help

04-05-2008, 12:49 PM	#7 (permalink)
toy-driver Getting there Join Date: Oct 2007 Location: Dallas, TX Posts: 265 Thanks: 3 Thanked 12 Times in 12 Posts iTrader Rating: (3/100% )	I might be a little late on this, but... eBay Motors: 4AG Sidedraft Intake Manifold AW11 MR-2 AE86 (item 200213708299 end time Apr-11-08 21:15:41 PDT) Not that expensive.

04-11-2008, 01:28 AM	#8 (permalink)
Capt.Evergreen Cage Fighter Join Date: Apr 2008 Posts: 106 Thanks: 2 Thanked 1 Time in 1 Post iTrader Rating: (0/0% )	sick man... ITB's are a final touch to a built engines... any one heard of a stroker kit for the 4ag???? that would be nice...or a built bottom end?!?!Ive seen in modified mag. an ITB kit for $2000...but DAMN was it nice...