mr2 1988 4gae

rich123x · 04-12-2008, 05:52 PM

any ideas , i have changed head gasket because of smoking badly and creamy/frothy water , smoke has virtually stopped but still have creamy/frothy water

Gairloch · 04-13-2008, 12:19 AM

Where are you seeing it? You sure you've bled the coolant system well?

Mista 2 · 04-13-2008, 07:09 AM

when you put new oil into your engine did you give it a good flush? when i did my conversion it had some "snot" in the oil even after they flushed it so i ran a propper oil flush and dropped the oil and started again, this completely fixed it.

Tim Tull · 05-02-2008, 09:19 PM

I had the same trouble a while back. Check the oil cooler.

04-12-2008, 05:52 PM	#1 (permalink)
rich123x No Skills Join Date: Apr 2008 Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	mr2 1988 4gae any ideas , i have changed head gasket because of smoking badly and creamy/frothy water , smoke has virtually stopped but still have creamy/frothy water

04-13-2008, 12:19 AM	#2 (permalink)
Gairloch Dreaming of apexes Join Date: Aug 2005 Location: Minneapolis, MN Posts: 4,854 Thanks: 125 Thanked 258 Times in 228 Posts My Google Map iTrader Rating: (7/100% )	Where are you seeing it? You sure you've bled the coolant system well? __________________ "Inside the car, the world beyond the driver's immediate horizon ceases to exist. Alone with the solitude of his desire, survival sense numbed by the speed, he's outrun the mediocrity of the outside world, slipped the shackles it tries to clamp on us all. He is running free, chased only by a fear of failure, for failure is to risk ejection into the real world." ~Mark Hughes

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-13-2008, 07:09 AM	#3 (permalink)
Mista 2 Cage Fighter Join Date: Nov 2006 Location: Adelaide, Australia Posts: 461 Thanks: 16 Thanked 21 Times in 21 Posts My Google Map iTrader Rating: (0/0% )	when you put new oil into your engine did you give it a good flush? when i did my conversion it had some "snot" in the oil even after they flushed it so i ran a propper oil flush and dropped the oil and started again, this completely fixed it.

05-02-2008, 09:19 PM	#4 (permalink)
Tim Tull No Skills Join Date: May 2008 Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	I had the same trouble a while back. Check the oil cooler.