Engine Mounts

Mista 2 · 08-23-2008, 09:15 AM

I had a look under my car the other day and it looks as if i could do with new mounts. I looked at work and i couldnt find anyone that made any for an AW11 but i found some for a corolla with a 4age. my question is will these fit my AW11? i know the engine side will but i need the chassis side to fit too.

any help would be gr8

Thanks

Jordan
Mista 2

kirkosaurus · 08-23-2008, 12:58 PM

Every thought about motor mount inserts?
MR2 urethane motor mount insert page

sw21turbo · 08-23-2008, 02:11 PM

I have kirkosaurus's motor mounts and love them, high quality, defiently worth the few bucks.

Ku-sama · 08-23-2008, 03:31 PM

Twosrus.com has them

328FTW · 08-26-2008, 10:45 PM

OK this may sound like the most ghetto thing ever but it worked beautifully on my mk 1.....boat rollers, the rollers on a trailer for launching boats can be all shapes and sizes and I happened across a set that were urethane and the perfect flexability and they pressed right in! The hole in the middle was even the right size. I am surprised how good they are for $5. The only issue I've had is the immense laughter it causes when people find out my mk1 is built out of stuff from the local hardware stores bargain bin.

Gairloch · 08-27-2008, 12:19 AM

^ now that is amazing!

Don't suppose you have pictures?

F0Bman · 08-27-2008, 01:06 AM

I believe TRD does make hard rubber motor mounts still.

halo07 · 08-27-2008, 01:08 AM

just installed new mounts from rockauto.com and i love em....working great.

328FTW · 08-27-2008, 04:18 AM

Sorry Gairloch no pictures

Not the sort of mod that I thought was worth documenting. Was easy hardest part was getting the old rubber out. Then press in bolt up and your done, plus they can be machined down (carefully) to fit so for the smaller mounts just spin on a lathe, will never look at boat rollers the same again

08-23-2008, 09:15 AM	#1 (permalink)
Mista 2 Cage Fighter Join Date: Nov 2006 Location: Adelaide, Australia Posts: 460 Thanks: 16 Thanked 21 Times in 21 Posts My Google Map iTrader Rating: (0/0% )	Engine Mounts I had a look under my car the other day and it looks as if i could do with new mounts. I looked at work and i couldnt find anyone that made any for an AW11 but i found some for a corolla with a 4age. my question is will these fit my AW11? i know the engine side will but i need the chassis side to fit too. any help would be gr8 Thanks Jordan Mista 2

08-27-2008, 12:19 AM	#6 (permalink)
Gairloch Dreaming of apexes Join Date: Aug 2005 Location: Minneapolis, MN Posts: 4,472 Thanks: 115 Thanked 222 Times in 195 Posts My Google Map iTrader Rating: (7/100% )	^ now that is amazing! Don't suppose you have pictures? __________________ "Inside the car, the world beyond the driver's immediate horizon ceases to exist. Alone with the solitude of his desire, survival sense numbed by the speed, he's outrun the mediocrity of the outside world, slipped the shackles it tries to clamp on us all. He is running free, chased only by a fear of failure, for failure is to risk ejection into the real world." ~Mark Hughes

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-23-2008, 12:58 PM	#2 (permalink)
kirkosaurus MK1.5 #21 Join Date: Oct 2005 Location: Smyrna, TN Posts: 33 Thanks: 0 Thanked 0 Times in 0 Posts My Google Map iTrader Rating: (0/0% )	Every thought about motor mount inserts? MR2 urethane motor mount insert page

08-23-2008, 02:11 PM	#3 (permalink)
sw21turbo Some Skills Join Date: Aug 2008 Location: SW Michigan Posts: 96 Thanks: 2 Thanked 1 Time in 1 Post iTrader Rating: (1/100% )	I have kirkosaurus's motor mounts and love them, high quality, defiently worth the few bucks.

08-23-2008, 03:31 PM	#4 (permalink)
Ku-sama Cage Fighter Join Date: Mar 2008 Location: Germantown, MD Posts: 943 Thanks: 7 Thanked 21 Times in 21 Posts My Google Map iTrader Rating: (2/100% )	Twosrus.com has them

08-26-2008, 10:45 PM	#5 (permalink)
328FTW You got another WHAT?!? Join Date: Aug 2008 Location: New Zealand Posts: 401 Thanks: 6 Thanked 26 Times in 24 Posts iTrader Rating: (0/0% )	OK this may sound like the most ghetto thing ever but it worked beautifully on my mk 1.....boat rollers, the rollers on a trailer for launching boats can be all shapes and sizes and I happened across a set that were urethane and the perfect flexability and they pressed right in! The hole in the middle was even the right size. I am surprised how good they are for $5. The only issue I've had is the immense laughter it causes when people find out my mk1 is built out of stuff from the local hardware stores bargain bin.

08-27-2008, 01:06 AM	#7 (permalink)
F0Bman Cage Fighter Join Date: Mar 2008 Posts: 257 Thanks: 0 Thanked 3 Times in 3 Posts iTrader Rating: (0/0% )	I believe TRD does make hard rubber motor mounts still.

08-27-2008, 01:08 AM	#8 (permalink)
halo07 lookin for 2nd gen Join Date: Sep 2007 Location: Huber Heights Posts: 88 Thanks: 7 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	just installed new mounts from rockauto.com and i love em....working great.

08-27-2008, 04:18 AM	#9 (permalink)
328FTW You got another WHAT?!? Join Date: Aug 2008 Location: New Zealand Posts: 401 Thanks: 6 Thanked 26 Times in 24 Posts iTrader Rating: (0/0% )	Sorry Gairloch no pictures Not the sort of mod that I thought was worth documenting. Was easy hardest part was getting the old rubber out. Then press in bolt up and your done, plus they can be machined down (carefully) to fit so for the smaller mounts just spin on a lathe, will never look at boat rollers the same again