Clutch Flywheel fitment on '95 MR2 NA

iguana · 11-30-2006, 02:43 AM

So I got a Fidanza lightweight flywheel and F1 stage 2 clutch for the MR2 and my mechanic says that there is slight clutch slipping. These are brand new parts

The hydraulic system is apparently in good shape, so it is not an issue of hydraulic pressure on the clutch, it simply slips when in "full contact" mode. Is there an adjustment that can be made? Has anyone had any similar problems? The clutch/flywheel suppliers are no help at all. I did verify that the parts are correct. Any ideas here?

TomsMR2 · 12-01-2006, 10:06 AM

i have a fidanza flywheel on my 95 motor without any issues at all.

your clutch was probably installed wrong. theres no adjustments on the hydraulic system.

iguana · 12-01-2006, 12:54 PM

Quote:

Originally Posted by TomsMR2

i have a fidanza flywheel on my 95 motor without any issues at all.

your clutch was probably installed wrong. theres no adjustments on the hydraulic system.

Are you still running the stock clutch?

Thanks

TomsMR2 · 12-01-2006, 02:51 PM

an exedy. doesnt matter though, no clutch should slip with a fidanza unless it was defective, or installed wrong. in both cases, whoever installed it is at fault.

11-30-2006, 02:43 AM	#1 (permalink)
iguana No Skills Join Date: Nov 2006 Location: Palo Alto, CA Posts: 14 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	Clutch Flywheel fitment on '95 MR2 NA So I got a Fidanza lightweight flywheel and F1 stage 2 clutch for the MR2 and my mechanic says that there is slight clutch slipping. These are brand new parts The hydraulic system is apparently in good shape, so it is not an issue of hydraulic pressure on the clutch, it simply slips when in "full contact" mode. Is there an adjustment that can be made? Has anyone had any similar problems? The clutch/flywheel suppliers are no help at all. I did verify that the parts are correct. Any ideas here?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-01-2006, 10:06 AM	#2 (permalink)
TomsMR2 Formerly Tom Brokaw Join Date: Feb 2005 Location: Bay Area Posts: 2,138 Thanks: 8 Thanked 165 Times in 138 Posts Blog Entries: 1 iTrader Rating: (0/0% )	i have a fidanza flywheel on my 95 motor without any issues at all. your clutch was probably installed wrong. theres no adjustments on the hydraulic system.

12-01-2006, 02:51 PM	#4 (permalink)
TomsMR2 Formerly Tom Brokaw Join Date: Feb 2005 Location: Bay Area Posts: 2,138 Thanks: 8 Thanked 165 Times in 138 Posts Blog Entries: 1 iTrader Rating: (0/0% )	an exedy. doesnt matter though, no clutch should slip with a fidanza unless it was defective, or installed wrong. in both cases, whoever installed it is at fault.