alright guys whos a 3s-ge expert?

jepree · 12-08-2006, 01:07 AM

i have an 1991 rhd 3s-ge mr2. (fromt japan not uk)

i would like some help on knowing where my "horsepower" and "torque" is on the rpm scale/band and how much this car is pushing?

ive been trying to read up on the net on this stuff but keep falling short! they keep telling me 200 or 175 or 156??? so im confused! dang it!

Mister2.2 · 12-08-2006, 07:05 AM

I *Think* it's the second gen (1990-93), 154ps or 151.8902hp (ps * .9863)

jepree · 12-08-2006, 01:41 PM

Quote:

Originally Posted by Mister2.2

I *Think* it's the second gen (1990-93), 154ps or 151.8902hp (ps * .9863)

you wouldent happen to know at what rpm this hp is at would you?

phzoinkMKII · 12-08-2006, 02:31 PM

Dimensions:
Length: 4170mm
Width: 1700mm
Height: 1240mm
Wheel Base = 2400mm
Front Track = 1470mm
Rear Track = 1450mm
Ground Clearance: 135mm
Coefficient of drag: 0.310
Weight: 1210kg
%Weight on front wheels: 42%

Engine:
Model: 3S-GE

Type: DOHC 16v
Bore x Stroke:
Displacement: 1998cc
Compression Ratio:
BHP @ RPM: 158 @ 6600
Torque @ RPM: 140 @ 4800
Fuel Injection: Multipoint
Fuel Requirement: Unleaded
Exhaust-Emission Control Equipment: oxygen sensor

Drivetrain:
Transmission: 5-speed manual
Gear Ratios:
5th: 0.820
4th: 1.028
3rd: 1.322
2nd: 1.960
1st: 3.285
Final Drive Ratio: 3.944

Acceleration:
0-100 ft:
0-500 ft:
0-1320 ft (1/4 mile): 15.8
0-30 mph: 2.8
0-50 mph:
0-60 mph: 7.2
0-70 mph:
0-80 mph:
0-100 mph: 20.8

Speed in Gears:
5th gear (6500 RPM): 142mph
4th gear (7000 RPM): 122mph
3rd gear (7000 RPM): 98mph
2nd gear (7000 RPM): 67mph
1st gear (7000 RPM): 40mph

phzoinkMKII · 12-08-2006, 02:32 PM

Dimensions:
Length: 4170mm
Width: 1700mm
Height: 1240mm
Wheel Base = 2400mm
Front Track = 1470mm
Rear Track = 1450mm
Ground Clearance: 135mm
Coefficient of drag: 0.310
%Weight on front wheels: 42%

Engine:
Model: 3S-GE

Type: DOHC 16v
Bore x Stroke:
Displacement: 1998cc
Compression Ratio: 10.0:1
BHP @ RPM: 158 @ 6600
Torque @ RPM: 140 @ 4800
Fuel Injection: Multipoint
Fuel Requirement: Unleaded
Exhaust-Emission Control Equipment: 3-way catalytic convertor, oxygen sensor

Drivetrain:
Transmission: 5-speed manual
Gear Ratios:
5th: 0.820
4th: 1.028
3rd: 1.322
2nd: 1.960
1st: 3.285
Final Drive Ratio: 3.944

Acceleration:
0-100 ft:
0-500 ft:
0-1320 ft (1/4 mile):
0-30 mph:
0-50 mph:
0-60 mph:
0-70 mph: 7.2
0-80 mph:
0-100 mph: 20.8

Speed in Gears:
5th gear (6500 RPM): 142mph
4th gear (7000 RPM): 122mph
3rd gear (7000 RPM): 98mph
2nd gear (7000 RPM): 67mph
1st gear (7000 RPM): 40mph

jepree · 12-08-2006, 04:38 PM

Quote:

Originally Posted by phzoinkMKII

Dimensions:
Length: 4170mm
Width: 1700mm
Height: 1240mm
Wheel Base = 2400mm
Front Track = 1470mm
Rear Track = 1450mm
Ground Clearance: 135mm
Coefficient of drag: 0.310
%Weight on front wheels: 42%

Engine:
Model: 3S-GE

Type: DOHC 16v
Bore x Stroke:
Displacement: 1998cc
Compression Ratio: 10.0:1
BHP @ RPM: 158 @ 6600
Torque @ RPM: 140 @ 4800
Fuel Injection: Multipoint
Fuel Requirement: Unleaded
Exhaust-Emission Control Equipment: 3-way catalytic convertor, oxygen sensor

Drivetrain:
Transmission: 5-speed manual
Gear Ratios:
5th: 0.820
4th: 1.028
3rd: 1.322
2nd: 1.960
1st: 3.285
Final Drive Ratio: 3.944

Acceleration:
0-100 ft:
0-500 ft:
0-1320 ft (1/4 mile):
0-30 mph:
0-50 mph:
0-60 mph:
0-70 mph: 7.2
0-80 mph:
0-100 mph: 20.8

Speed in Gears:
5th gear (6500 RPM): 142mph
4th gear (7000 RPM): 122mph
3rd gear (7000 RPM): 98mph
2nd gear (7000 RPM): 67mph
1st gear (7000 RPM): 40mph

THANK YOU! YOUR ARE A GOD!!!

Luni · 12-08-2006, 06:47 PM

I was dumb and thought 3SGTE at first.

Thx for the specs

Poohhbear9044 · 12-16-2006, 04:04 PM

I have a Rev2 3S-GE...below is my printout/graph from a rolling road day I attended. It will give you some idea of where power and torque are placed in the rev range.

Bob

jepree · 01-03-2007, 01:03 AM

wow thank you!

JT1 · 02-10-2007, 07:17 PM

Quote:

I have an 1991 rhd 3s-ge mr2. (fromt japan not uk)

Sorry, but if it is a japanese 3SGE it doesn't have 156hp. European models have 156hp (rev1), but in japan they have 164 +/- hp due to less restrictive emission and noise laws. I wonder if there is a measurable difference since gen2 and 3 (156hp, 175/170hp) are almost equal when it comes to acceleration.

12-08-2006, 01:07 AM	#1 (permalink)
jepree g-limited Join Date: Nov 2006 Location: Calgary, Alberta Posts: 123 Thanks: 8 Thanked 1 Time in 1 Post iTrader Rating: (1/100% )	alright guys whos a 3s-ge expert? i have an 1991 rhd 3s-ge mr2. (fromt japan not uk) i would like some help on knowing where my "horsepower" and "torque" is on the rpm scale/band and how much this car is pushing? ive been trying to read up on the net on this stuff but keep falling short! they keep telling me 200 or 175 or 156??? so im confused! dang it!

12-08-2006, 07:05 AM	#2 (permalink)
Mister2.2 Cheese it! Join Date: Feb 2005 Posts: 6,220 Thanks: 106 Thanked 107 Times in 92 Posts Blog Entries: 1 My Google Map iTrader Rating: (3/100% )	I Think it's the second gen (1990-93), 154ps or 151.8902hp (ps * .9863) __________________ --Josh MR2Trader.com Free Accounts to Buy and Sell your MR2 Parts! Deal of the Week: MR2Only Magazine, Get it NOW! Click Here. Ask me about Web Hosting Solutions, starting at $5.95 a month. 'I am at two with nature.' 'Students achieving Oneness will move on to Twoness.'

12-08-2006, 02:31 PM	#4 (permalink)
phzoinkMKII Fight to the last Join Date: Mar 2006 Location: I need a change Posts: 1,243 Thanks: 4 Thanked 35 Times in 30 Posts My Google Map iTrader Rating: (1/100% )	Toyota MR2 - MKII N/A (1989 - 1991) Dimensions: Length: 4170mm Width: 1700mm Height: 1240mm Wheel Base = 2400mm Front Track = 1470mm Rear Track = 1450mm Ground Clearance: 135mm Coefficient of drag: 0.310 Weight: 1210kg %Weight on front wheels: 42% Engine: Model: 3S-GE Type: DOHC 16v Bore x Stroke: Displacement: 1998cc Compression Ratio: BHP @ RPM: 158 @ 6600 Torque @ RPM: 140 @ 4800 Fuel Injection: Multipoint Fuel Requirement: Unleaded Exhaust-Emission Control Equipment: oxygen sensor Drivetrain: Transmission: 5-speed manual Gear Ratios: 5th: 0.820 4th: 1.028 3rd: 1.322 2nd: 1.960 1st: 3.285 Final Drive Ratio: 3.944 Acceleration: 0-100 ft: 0-500 ft: 0-1320 ft (1/4 mile): 15.8 0-30 mph: 2.8 0-50 mph: 0-60 mph: 7.2 0-70 mph: 0-80 mph: 0-100 mph: 20.8 Speed in Gears: 5th gear (6500 RPM): 142mph 4th gear (7000 RPM): 122mph 3rd gear (7000 RPM): 98mph 2nd gear (7000 RPM): 67mph 1st gear (7000 RPM): 40mph

12-08-2006, 02:32 PM	#5 (permalink)
phzoinkMKII Fight to the last Join Date: Mar 2006 Location: I need a change Posts: 1,243 Thanks: 4 Thanked 35 Times in 30 Posts My Google Map iTrader Rating: (1/100% )	Toyota MR2 - MKII N/A (1991 - 1994) Dimensions: Length: 4170mm Width: 1700mm Height: 1240mm Wheel Base = 2400mm Front Track = 1470mm Rear Track = 1450mm Ground Clearance: 135mm Coefficient of drag: 0.310 %Weight on front wheels: 42% Engine: Model: 3S-GE Type: DOHC 16v Bore x Stroke: Displacement: 1998cc Compression Ratio: 10.0:1 BHP @ RPM: 158 @ 6600 Torque @ RPM: 140 @ 4800 Fuel Injection: Multipoint Fuel Requirement: Unleaded Exhaust-Emission Control Equipment: 3-way catalytic convertor, oxygen sensor Drivetrain: Transmission: 5-speed manual Gear Ratios: 5th: 0.820 4th: 1.028 3rd: 1.322 2nd: 1.960 1st: 3.285 Final Drive Ratio: 3.944 Acceleration: 0-100 ft: 0-500 ft: 0-1320 ft (1/4 mile): 0-30 mph: 0-50 mph: 0-60 mph: 0-70 mph: 7.2 0-80 mph: 0-100 mph: 20.8 Speed in Gears: 5th gear (6500 RPM): 142mph 4th gear (7000 RPM): 122mph 3rd gear (7000 RPM): 98mph 2nd gear (7000 RPM): 67mph 1st gear (7000 RPM): 40mph

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-08-2006, 06:47 PM	#7 (permalink)
Luni ST185 Powered SW20 Join Date: Oct 2005 Location: Salt Lake City Utah Posts: 2,740 Thanks: 7 Thanked 95 Times in 81 Posts My Google Map iTrader Rating: (8/100% )	I was dumb and thought 3SGTE at first. Thx for the specs

12-16-2006, 04:04 PM	#8 (permalink)
Poohhbear9044 Some Skills Join Date: Oct 2006 Location: United Kingdom Posts: 73 Thanks: 2 Thanked 14 Times in 10 Posts iTrader Rating: (0/0% )	I have a Rev2 3S-GE...below is my printout/graph from a rolling road day I attended. It will give you some idea of where power and torque are placed in the rev range. Bob

01-03-2007, 01:03 AM	#9 (permalink)
jepree g-limited Join Date: Nov 2006 Location: Calgary, Alberta Posts: 123 Thanks: 8 Thanked 1 Time in 1 Post iTrader Rating: (1/100% )	wow thank you!