5sfe Forged Pistons - Page 2

Weasy2k · 04-10-2007, 12:14 PM

They go for 765 and i don't stock them just yet but i can find out how long it will take to get in.

mister2dt · 04-11-2007, 01:36 PM

there area few manufacturers that make forged pistons for the 5sfe. wiseco is one, ross is another. all you need to do is call them and order a set. cp makes the stroker piston but it requires the 3s head.

goto www.raceeng.com they have 2 sets available off the shelf for the 5s in a turbo application.

mrturrari · 04-14-2007, 10:48 PM

Just for reference Atomic Speedware custom pistons run just over $600 with rings, pins and locks and you get them to your custom specs. The pistons are actually made by Arias.

Also Eagle 3sgte rods are only ~$325 and machine work to fit them to the 5s crank is going to be much less then the difference for Crower or Pauter forged 5s rods which are $700+. This gives you a fresh surface for your forged rods and a smaller big end which is better for revs.

Hope I am not stepping on toes but that is the most cost effective way I have seen to get a forged bottom end.

04-10-2007, 12:14 PM	#21 (permalink)
Weasy2k 3.4L 10K RPM In the works Join Date: Mar 2005 Location: Vancouver, BC Posts: 8,886 Thanks: 34 Thanked 76 Times in 65 Posts iTrader Rating: (6/100% )	They go for 765 and i don't stock them just yet but i can find out how long it will take to get in. __________________ -Johnny @ Sea2Sky Tuning - www.sea2skytuning.com http://www.mr2.com/forums/sea2sky-tu...-out-sale.html

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-11-2007, 01:36 PM	#22 (permalink)
mister2dt No Skills Join Date: Apr 2007 Posts: 17 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	there area few manufacturers that make forged pistons for the 5sfe. wiseco is one, ross is another. all you need to do is call them and order a set. cp makes the stroker piston but it requires the 3s head. goto www.raceeng.com they have 2 sets available off the shelf for the 5s in a turbo application.

04-14-2007, 10:48 PM	#23 (permalink)
mrturrari I <3 my 5sfe Join Date: Mar 2005 Posts: 418 Thanks: 2 Thanked 93 Times in 60 Posts iTrader Rating: (0/0% )	Just for reference Atomic Speedware custom pistons run just over $600 with rings, pins and locks and you get them to your custom specs. The pistons are actually made by Arias. Also Eagle 3sgte rods are only ~$325 and machine work to fit them to the 5s crank is going to be much less then the difference for Crower or Pauter forged 5s rods which are $700+. This gives you a fresh surface for your forged rods and a smaller big end which is better for revs. Hope I am not stepping on toes but that is the most cost effective way I have seen to get a forged bottom end.