speedometer?

gnmr2 · 05-07-2007, 01:21 AM

Hi I have a 92 mr2 NA and it speedometer doesnt work, could it be a drive-motor circuitry and where is this thing located at?

aler_ka · 05-07-2007, 01:57 AM

this might be the problem
http://www.stephenmason.com/cars/mr2speedo.html

gnmr2 · 05-14-2007, 11:16 PM

Quote:

Originally Posted by aler_ka

this might be the problem
http://www.stephenmason.com/cars/mr2speedo.html

thanks for the link

squid? · 05-15-2007, 12:23 AM

first before you take 1/2 the motor apart i would just look to see if the cable detached itself from behind the spedo, thats what it was for me

gnmr2 · 05-16-2007, 02:04 AM

i going go check there, good one, the spedo behind the cluster gauge right

squid? · 05-16-2007, 04:09 PM

Weasy2k · 05-17-2007, 12:06 PM

Hah yea that just happened to me not to long ago

Speedo disconnected from the cluster...damn thing has lots of grease on it.

shimric · 05-19-2007, 08:16 PM

It could be as simple as replacing the second speedo cable. Mine was broken pretty bad. You can get them from rock auto for like 20 bucks. Maybe less, I forget.

gnmr2 · 05-24-2007, 12:15 AM

yea i check front cable is good and i did it by unattach the midpoint cable connector with plier and 12mm wrench and hook a drill to it setting it to turn left. Then i pull the back cable out and is was rusted. Does the rear cable on the end near tranaxles have flat pin? becuz my dosent

TRD_MR2_DRGN · 05-25-2007, 10:58 AM

Ok, in the instructions, it says the keys are like 50 cent parts. I checked with dealership, and they said each key is like $15. Anybody know where to get it cheaper from. 15 bucks isn't too much but for a small peice of metal, that seems like a lot. So I'm looking at like almost 40ish for two small metal tabs

. Now that's a lot for like 3 oz of metal.

gnmr2 · 05-26-2007, 01:08 AM

Quote:

Originally Posted by TRD_MR2_DRGN

Ok, in the instructions, it says the keys are like 50 cent parts. I checked with dealership, and they said each key is like $15. Anybody know where to get it cheaper from. 15 bucks isn't too much but for a small peice of metal, that seems like a lot. So I'm looking at like almost 40ish for two small metal tabs

. Now that's a lot for like 3 oz of metal.

maybe
http://www.rockauto.com/
have it for less

gnmr2 · 05-30-2007, 12:57 AM

Quote:

Originally Posted by shimric

It could be as simple as replacing the second speedo cable. Mine was broken pretty bad. You can get them from rock auto for like 20 bucks. Maybe less, I forget.

I also think my rear cable is broken too , can you tell me or show which one you brought, it look they only got speedometer pin, is it the first one or second one? http://www.rockauto.com/catalog/x,ca...,parttype,1440

shimric · 05-31-2007, 03:36 PM

This needs to be a sticky. The part number for the rear speedo cable found on www.rockauto.com is

Y849 It's like 10 dollars. I have bought it. It works! DIRECT FIT. This is the the REAR SPEEDOMETER CABLE.

sleepermr2 · 10-10-2007, 05:20 AM

is there any another test you can do to see if its the rear cable. mine just went out today and im gonna check in the morning. i know you can spin the cable to see if its the front cable, and from what ive found you can do a cruise control test for the rear...but i have an aftermarket steering wheel so i dont have the cruise control anymore.
so is there another test to determine if its the rear cable or the assembly?

05-07-2007, 01:21 AM	#1 (permalink)
gnmr2 No Skills Join Date: Apr 2007 Posts: 38 Thanks: 2 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	speedometer? Hi I have a 92 mr2 NA and it speedometer doesnt work, could it be a drive-motor circuitry and where is this thing located at?

05-16-2007, 04:09 PM	#6 (permalink)
squid? ? Join Date: Aug 2006 Location: ventura, ca Posts: 15 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	ya

05-17-2007, 12:06 PM	#7 (permalink)
Weasy2k 3.4L 10K RPM In the works Join Date: Mar 2005 Location: Vancouver, BC Posts: 8,886 Thanks: 34 Thanked 76 Times in 65 Posts iTrader Rating: (6/100% )	Hah yea that just happened to me not to long ago Speedo disconnected from the cluster...damn thing has lots of grease on it. __________________ -Johnny @ Sea2Sky Tuning - www.sea2skytuning.com http://www.mr2.com/forums/sea2sky-tu...-out-sale.html

05-31-2007, 03:36 PM	#13 (permalink)
shimric Ruler of OT Join Date: Apr 2006 Location: South Carolina Posts: 1,236 Thanks: 35 Thanked 40 Times in 34 Posts Blog Entries: 1 iTrader Rating: (0/0% )	This needs to be a sticky. The part number for the rear speedo cable found on www.rockauto.com is Y849 It's like 10 dollars. I have bought it. It works! DIRECT FIT. This is the the REAR SPEEDOMETER CABLE. Last edited by shimric; 05-31-2007 at 03:50 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-07-2007, 01:57 AM	#2 (permalink)
aler_ka No Skills Join Date: Mar 2006 Location: hawaii Posts: 236 Thanks: 0 Thanked 4 Times in 4 Posts iTrader Rating: (0/0% )	this might be the problem http://www.stephenmason.com/cars/mr2speedo.html

05-15-2007, 12:23 AM	#4 (permalink)
squid? ? Join Date: Aug 2006 Location: ventura, ca Posts: 15 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	first before you take 1/2 the motor apart i would just look to see if the cable detached itself from behind the spedo, thats what it was for me

05-16-2007, 02:04 AM	#5 (permalink)
gnmr2 No Skills Join Date: Apr 2007 Posts: 38 Thanks: 2 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	i going go check there, good one, the spedo behind the cluster gauge right

05-19-2007, 08:16 PM	#8 (permalink)
shimric Ruler of OT Join Date: Apr 2006 Location: South Carolina Posts: 1,236 Thanks: 35 Thanked 40 Times in 34 Posts Blog Entries: 1 iTrader Rating: (0/0% )	It could be as simple as replacing the second speedo cable. Mine was broken pretty bad. You can get them from rock auto for like 20 bucks. Maybe less, I forget.

05-24-2007, 12:15 AM	#9 (permalink)
gnmr2 No Skills Join Date: Apr 2007 Posts: 38 Thanks: 2 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	yea i check front cable is good and i did it by unattach the midpoint cable connector with plier and 12mm wrench and hook a drill to it setting it to turn left. Then i pull the back cable out and is was rusted. Does the rear cable on the end near tranaxles have flat pin? becuz my dosent

05-25-2007, 10:58 AM	#10 (permalink)
TRD_MR2_DRGN Cage Fighter Join Date: May 2007 Posts: 445 Thanks: 5 Thanked 5 Times in 5 Posts iTrader Rating: (0/0% )	Ok, in the instructions, it says the keys are like 50 cent parts. I checked with dealership, and they said each key is like $15. Anybody know where to get it cheaper from. 15 bucks isn't too much but for a small peice of metal, that seems like a lot. So I'm looking at like almost 40ish for two small metal tabs . Now that's a lot for like 3 oz of metal.

10-10-2007, 05:20 AM	#14 (permalink)
sleepermr2 Cage Fighter Join Date: Mar 2007 Posts: 467 Thanks: 6 Thanked 16 Times in 16 Posts iTrader Rating: (2/100% )	is there any another test you can do to see if its the rear cable. mine just went out today and im gonna check in the morning. i know you can spin the cable to see if its the front cable, and from what ive found you can do a cruise control test for the rear...but i have an aftermarket steering wheel so i dont have the cruise control anymore. so is there another test to determine if its the rear cable or the assembly?