MR2 OVER HEATING!!!

Redfox · 10-06-2008, 03:19 PM

Hello my 5sfe engine over heated and i have already got parts to fix the problem but i can't figure out what a certian part is called and a broken sensor.can someone tell me the hole name of this unit and the name of the gray sensor on the left so i can order them.here some numbers that where on the sensor if this helps 89462-20020 (12 v) ImageShack - Hosting :: dsc01748kc0.jpg

Gairloch · 10-06-2008, 06:50 PM

The grey thing is one of the coolant temp sensors. The blue is VSV for the evap.

Redfox · 10-06-2008, 09:01 PM

If the gray one is the temp sensor then what is the green one in the back for? plz help me ill post better pic

Gairloch · 10-06-2008, 09:12 PM

I would look up the right page for you but it's blocked at work.

MR2-Tech.com - BGB

If you look in the Mk2 forum you can find different copies of the BGB (big green book AKA factory service manual.) hosted in various places.

Redfox · 10-06-2008, 09:36 PM

I couldn't find it at BGB here's a pic hope you get back to me later on. ImageShack - Hosting :: dsc01749zx7.jpg as you can see it on the left side next to where the gray sensor was before i toke it out.

Redfox · 10-08-2008, 10:35 PM

bump It's not something that came off a NASA spaceship for gods sake ,anyone? lol

Redfox · 10-09-2008, 05:00 PM

The gray sensor is called start inject switch/cold start switch and it cost $180 at toyota dealer!!!!!! holy hell

Gairloch · 10-09-2008, 05:53 PM

Holy buckets! I bet you could get one used for a fraction of that. Hell, I probably have one kicking around if you need one.

Thanks for following up.

fuzor · 10-10-2008, 04:11 PM

went all the work is done dont forget to blead the cooling system! if u dont blead the cooling system the car may overheat again
hope this helps

10-06-2008, 03:19 PM	#1 (permalink)
Redfox No Skills Join Date: Mar 2008 Location: Modesto CA Posts: 49 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	MR2 OVER HEATING!!! Hello my 5sfe engine over heated and i have already got parts to fix the problem but i can't figure out what a certian part is called and a broken sensor.can someone tell me the hole name of this unit and the name of the gray sensor on the left so i can order them.here some numbers that where on the sensor if this helps 89462-20020 (12 v) ImageShack - Hosting :: dsc01748kc0.jpg Last edited by Redfox; 10-06-2008 at 04:07 PM.

10-06-2008, 06:50 PM	#2 (permalink)
Gairloch Dreaming of apexes Join Date: Aug 2005 Location: Minneapolis, MN Posts: 4,472 Thanks: 115 Thanked 222 Times in 195 Posts My Google Map iTrader Rating: (7/100% )	The grey thing is one of the coolant temp sensors. The blue is VSV for the evap. __________________ "Inside the car, the world beyond the driver's immediate horizon ceases to exist. Alone with the solitude of his desire, survival sense numbed by the speed, he's outrun the mediocrity of the outside world, slipped the shackles it tries to clamp on us all. He is running free, chased only by a fear of failure, for failure is to risk ejection into the real world." ~Mark Hughes

10-06-2008, 09:01 PM	#3 (permalink)
Redfox No Skills Join Date: Mar 2008 Location: Modesto CA Posts: 49 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	If the gray one is the temp sensor then what is the green one in the back for? plz help me ill post better pic Last edited by Redfox; 10-06-2008 at 09:07 PM.

10-09-2008, 05:00 PM	#7 (permalink)
Redfox No Skills Join Date: Mar 2008 Location: Modesto CA Posts: 49 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	The gray sensor is called start inject switch/cold start switch and it cost $180 at toyota dealer!!!!!! holy hell Last edited by Redfox; 10-09-2008 at 05:14 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-06-2008, 09:12 PM	#4 (permalink)
Gairloch Dreaming of apexes Join Date: Aug 2005 Location: Minneapolis, MN Posts: 4,472 Thanks: 115 Thanked 222 Times in 195 Posts My Google Map iTrader Rating: (7/100% )	I would look up the right page for you but it's blocked at work. MR2-Tech.com - BGB If you look in the Mk2 forum you can find different copies of the BGB (big green book AKA factory service manual.) hosted in various places.

10-06-2008, 09:36 PM	#5 (permalink)
Redfox No Skills Join Date: Mar 2008 Location: Modesto CA Posts: 49 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	I couldn't find it at BGB here's a pic hope you get back to me later on. ImageShack - Hosting :: dsc01749zx7.jpg as you can see it on the left side next to where the gray sensor was before i toke it out.

10-08-2008, 10:35 PM	#6 (permalink)
Redfox No Skills Join Date: Mar 2008 Location: Modesto CA Posts: 49 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	bump It's not something that came off a NASA spaceship for gods sake ,anyone? lol

10-09-2008, 05:53 PM	#8 (permalink)
Gairloch Dreaming of apexes Join Date: Aug 2005 Location: Minneapolis, MN Posts: 4,472 Thanks: 115 Thanked 222 Times in 195 Posts My Google Map iTrader Rating: (7/100% )	Holy buckets! I bet you could get one used for a fraction of that. Hell, I probably have one kicking around if you need one. Thanks for following up.

10-10-2008, 04:11 PM	#9 (permalink)
fuzor NO SKILLS??(check my car) Join Date: Oct 2008 Location: SOME WHERE Posts: 32 Thanks: 1 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	went all the work is done dont forget to blead the cooling system! if u dont blead the cooling system the car may overheat again hope this helps