Help with power mirror switch

gt4-13 · 03-22-2009, 02:06 PM

Hey guys
I got a 91 N/A
I took off the power mirror switch/panel when removing it to replace the speakers and when trying to put it back
I can't it seems like the wiring harness doesn't want to go back into the switch is there something I am doing wrong or is there a piece missing?
any help would be great thanks.

Gairloch · 03-31-2009, 01:58 PM

Have you figured this out? If not, are you sure you have the right plug?

Jshuntr · 03-31-2009, 02:31 PM

Its kind of tricky, as it looks as if it should slide in the opposite way. The trick is to locate the push tab and make sure you're lining it up in the slot, then give it a push.

03-22-2009, 02:06 PM	#1 (permalink)
gt4-13 No Skills Join Date: Mar 2009 Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	Help with power mirror switch Hey guys I got a 91 N/A I took off the power mirror switch/panel when removing it to replace the speakers and when trying to put it back I can't it seems like the wiring harness doesn't want to go back into the switch is there something I am doing wrong or is there a piece missing? any help would be great thanks.

03-31-2009, 01:58 PM	#2 (permalink)
Gairloch Dreaming of apexes Join Date: Aug 2005 Location: Minneapolis, MN Posts: 4,848 Thanks: 125 Thanked 258 Times in 228 Posts My Google Map iTrader Rating: (7/100% )	Have you figured this out? If not, are you sure you have the right plug? __________________ "Inside the car, the world beyond the driver's immediate horizon ceases to exist. Alone with the solitude of his desire, survival sense numbed by the speed, he's outrun the mediocrity of the outside world, slipped the shackles it tries to clamp on us all. He is running free, chased only by a fear of failure, for failure is to risk ejection into the real world." ~Mark Hughes

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-31-2009, 02:31 PM	#3 (permalink)
Jshuntr Cage Fighter Join Date: Feb 2009 Location: Knoxville, TN Posts: 105 Thanks: 6 Thanked 1 Time in 1 Post iTrader Rating: (1/100% )	Its kind of tricky, as it looks as if it should slide in the opposite way. The trick is to locate the push tab and make sure you're lining it up in the slot, then give it a push.