3SGE 2ND gen BUIlD

MR2enV · 07-02-2009, 12:01 AM

Rebuilding motor from top to bottom...
Block cleaned, honed, ceramic coated,Crank balanced, ACL main bearings, ARP main studs,3sgte rods,ARP rod bolts, ACL rod bearings, 3rd gen 3sge pistons, 3rd gen 3sge camshafts, head machined and cut to raise compression, new oil pump, polished oil pan.....

masagsxr · 07-02-2009, 12:06 AM

always cool to see builds from top to bottom... keep us posted!

MR2enV · 07-02-2009, 12:07 AM

Next is Hyabusa ITB custom setup, 4-1 headers, mr2 turbo stock exhaust, Oil relocater with oil cooler, act prolight flywheel, spec clutch, Direct port nitrous injection..... Not sure on what to get to tune with, Either run stock ecu and modify air fuel with piggy back- or if anything get a powerfc or greddy e-manage..... expected numbers are 190whp to 200whp, 245-265 with nitrous...

MR2enV · 08-01-2009, 05:38 PM

The motor is done... now the headers are on and wraped and im still waiting for the ITBs to be fabed up by kiko racing...

jakedasnake · 08-05-2009, 04:12 PM

Dude thats badass caint wait to see more progress!!!!

MR2enV · 08-05-2009, 11:10 PM

putting the motor in 2mrw... here is the motor done, spec clutch, 93 low mileage tranny, stock 93 turbo exhaust...

MR JAS · 08-06-2009, 04:47 AM

any pics of headers unwraped?

BishopTTU · 08-06-2009, 09:38 AM

Random question - since you have the motor out, what are the colors of the wires running to the speed sensor on top of the tranny; I think there are 3.

MR2enV · 08-07-2009, 01:02 PM

Do you have electronic or manual speedo cluster?
I have manual and the motor comes electronic so you gotta match the wires...

MR2enV · 08-07-2009, 01:10 PM

in the harness its blk/yellow 2 blk/yellow, purple 2 purple, brwn 2 white wit blk stripe...

jakedasnake · 08-08-2009, 08:39 PM

K time for moar pics!!!!! lets see it in there!

MR2enV · 08-08-2009, 09:16 PM

ill post pics of it in 2mrw

MR2enV · 08-09-2009, 11:54 PM

Got most of it done today... gotta bleed the clutch, wire up the fan, put the fluids in, and install the itbs and vaccum box......

fvillota · 08-10-2009, 09:24 AM

wow looking good

muffinman · 08-10-2009, 12:07 PM

looks great.

MR2enV · 09-18-2009, 02:23 PM

Well so far this is how the itbs are looking... cost me a arm and a leg but it was worth it....... hope you like.. They still arent done yet but they are looking great...

MR2enV · 09-18-2009, 02:28 PM

they should be done next week

MR2enV · 09-20-2009, 01:41 PM

tuesday they will be done.. Ill post pics of the finished product try to get it running this week.... ill post a video up of it running.. hopefully everything works......

MR2enV · 09-23-2009, 12:28 AM

So the setup is done and I put it in and put the FPR, busa tps, IACV.. now I just gotta make a throttle linkage to hold the cable and bleed the clutch and adjust air fuel cuz its as rich as bill gates....

Hope your ready to see a clean 2nd gen 3sge with a sick ITB setup..

MR2enV · 09-23-2009, 12:28 AM

you ready?

07-02-2009, 12:01 AM	#1 (permalink)
MR2enV WHY SO SERIOUS? Join Date: Mar 2007 Location: Miramar, Florida Posts: 426 Thanks: 0 Thanked 6 Times in 6 Posts iTrader Rating: (3/80% )	3SGE 2ND gen BUIlD Rebuilding motor from top to bottom... Block cleaned, honed, ceramic coated,Crank balanced, ACL main bearings, ARP main studs,3sgte rods,ARP rod bolts, ACL rod bearings, 3rd gen 3sge pistons, 3rd gen 3sge camshafts, head machined and cut to raise compression, new oil pump, polished oil pan.....

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-02-2009, 12:06 AM	#2 (permalink)
masagsxr Cage Fighter Join Date: Sep 2008 Location: Norwalk, CA Posts: 3,181 Thanks: 1 Thanked 76 Times in 76 Posts iTrader Rating: (1/100% )	always cool to see builds from top to bottom... keep us posted!

07-02-2009, 12:07 AM	#3 (permalink)
MR2enV WHY SO SERIOUS? Join Date: Mar 2007 Location: Miramar, Florida Posts: 426 Thanks: 0 Thanked 6 Times in 6 Posts iTrader Rating: (3/80% )	Next is Hyabusa ITB custom setup, 4-1 headers, mr2 turbo stock exhaust, Oil relocater with oil cooler, act prolight flywheel, spec clutch, Direct port nitrous injection..... Not sure on what to get to tune with, Either run stock ecu and modify air fuel with piggy back- or if anything get a powerfc or greddy e-manage..... expected numbers are 190whp to 200whp, 245-265 with nitrous...

08-01-2009, 05:38 PM	#4 (permalink)
MR2enV WHY SO SERIOUS? Join Date: Mar 2007 Location: Miramar, Florida Posts: 426 Thanks: 0 Thanked 6 Times in 6 Posts iTrader Rating: (3/80% )	The motor is done... now the headers are on and wraped and im still waiting for the ITBs to be fabed up by kiko racing...

08-05-2009, 04:12 PM	#5 (permalink)
jakedasnake Beams Owners Group Join Date: Nov 2007 Location: Tampa Florida Posts: 66 Thanks: 1 Thanked 3 Times in 3 Posts My Google Map iTrader Rating: (2/100% )	Dude thats badass caint wait to see more progress!!!!

08-05-2009, 11:10 PM	#6 (permalink)
MR2enV WHY SO SERIOUS? Join Date: Mar 2007 Location: Miramar, Florida Posts: 426 Thanks: 0 Thanked 6 Times in 6 Posts iTrader Rating: (3/80% )	putting the motor in 2mrw... here is the motor done, spec clutch, 93 low mileage tranny, stock 93 turbo exhaust...

08-06-2009, 04:47 AM	#7 (permalink)
MR JAS Always blow on the pie Join Date: Apr 2009 Location: hamilton new zealand Posts: 337 Thanks: 7 Thanked 8 Times in 7 Posts iTrader Rating: (0/0% )	any pics of headers unwraped?

08-06-2009, 09:38 AM	#8 (permalink)
BishopTTU EeeViieeee & Sam Join Date: Sep 2007 Location: Austin, TX Posts: 68 Thanks: 6 Thanked 1 Time in 1 Post iTrader Rating: (0/0% )	Random question - since you have the motor out, what are the colors of the wires running to the speed sensor on top of the tranny; I think there are 3.

08-07-2009, 01:02 PM	#9 (permalink)
MR2enV WHY SO SERIOUS? Join Date: Mar 2007 Location: Miramar, Florida Posts: 426 Thanks: 0 Thanked 6 Times in 6 Posts iTrader Rating: (3/80% )	Do you have electronic or manual speedo cluster? I have manual and the motor comes electronic so you gotta match the wires...

08-07-2009, 01:10 PM	#10 (permalink)
MR2enV WHY SO SERIOUS? Join Date: Mar 2007 Location: Miramar, Florida Posts: 426 Thanks: 0 Thanked 6 Times in 6 Posts iTrader Rating: (3/80% )	in the harness its blk/yellow 2 blk/yellow, purple 2 purple, brwn 2 white wit blk stripe...

08-08-2009, 08:39 PM	#11 (permalink)
jakedasnake Beams Owners Group Join Date: Nov 2007 Location: Tampa Florida Posts: 66 Thanks: 1 Thanked 3 Times in 3 Posts My Google Map iTrader Rating: (2/100% )	K time for moar pics!!!!! lets see it in there!

08-08-2009, 09:16 PM	#12 (permalink)
MR2enV WHY SO SERIOUS? Join Date: Mar 2007 Location: Miramar, Florida Posts: 426 Thanks: 0 Thanked 6 Times in 6 Posts iTrader Rating: (3/80% )	ill post pics of it in 2mrw

08-09-2009, 11:54 PM	#13 (permalink)
MR2enV WHY SO SERIOUS? Join Date: Mar 2007 Location: Miramar, Florida Posts: 426 Thanks: 0 Thanked 6 Times in 6 Posts iTrader Rating: (3/80% )	Got most of it done today... gotta bleed the clutch, wire up the fan, put the fluids in, and install the itbs and vaccum box......

08-10-2009, 09:24 AM	#14 (permalink)
fvillota Cage Fighter Join Date: Feb 2008 Location: MIami Posts: 1,805 Thanks: 65 Thanked 28 Times in 28 Posts iTrader Rating: (6/100% )	wow looking good

08-10-2009, 12:07 PM	#15 (permalink)
muffinman Brain Surgeon Join Date: Jan 2008 Location: Ft. Lauderdale Posts: 1,752 Thanks: 24 Thanked 100 Times in 98 Posts My Google Map iTrader Rating: (1/100% )	looks great.

09-18-2009, 02:23 PM	#16 (permalink)
MR2enV WHY SO SERIOUS? Join Date: Mar 2007 Location: Miramar, Florida Posts: 426 Thanks: 0 Thanked 6 Times in 6 Posts iTrader Rating: (3/80% )	Well so far this is how the itbs are looking... cost me a arm and a leg but it was worth it....... hope you like.. They still arent done yet but they are looking great...

09-18-2009, 02:28 PM	#17 (permalink)
MR2enV WHY SO SERIOUS? Join Date: Mar 2007 Location: Miramar, Florida Posts: 426 Thanks: 0 Thanked 6 Times in 6 Posts iTrader Rating: (3/80% )	they should be done next week

09-20-2009, 01:41 PM	#18 (permalink)
MR2enV WHY SO SERIOUS? Join Date: Mar 2007 Location: Miramar, Florida Posts: 426 Thanks: 0 Thanked 6 Times in 6 Posts iTrader Rating: (3/80% )	tuesday they will be done.. Ill post pics of the finished product try to get it running this week.... ill post a video up of it running.. hopefully everything works......

09-23-2009, 12:28 AM	#19 (permalink)
MR2enV WHY SO SERIOUS? Join Date: Mar 2007 Location: Miramar, Florida Posts: 426 Thanks: 0 Thanked 6 Times in 6 Posts iTrader Rating: (3/80% )	So the setup is done and I put it in and put the FPR, busa tps, IACV.. now I just gotta make a throttle linkage to hold the cable and bleed the clutch and adjust air fuel cuz its as rich as bill gates.... Hope your ready to see a clean 2nd gen 3sge with a sick ITB setup..

09-23-2009, 12:28 AM	#20 (permalink)
MR2enV WHY SO SERIOUS? Join Date: Mar 2007 Location: Miramar, Florida Posts: 426 Thanks: 0 Thanked 6 Times in 6 Posts iTrader Rating: (3/80% )	you ready?