3sge ITB stump..TPS HELP!! GURUs

MR2enV · 09-11-2009, 12:22 AM

Okay the itbs are being made utilizing the bottom half of the intake manifold... the isc will run to each runner for correct readings.. The only stump is I dont know what to do about the tps..... Toyota tps are 4 wire and Hayabusa's utilize a 3 wire.... Can I wire up the three wire or do I need the 4 wire...

mrjimmyx · 09-11-2009, 12:27 PM

sweet! i like to keep updated about this.

MR2enV · 09-11-2009, 01:30 PM

Anyone.... mr220v maybe could help

mr220v · 09-11-2009, 01:59 PM

If you 3sge ecu doesn't use the idl pin on the tps, then you might be able to get away with the 3 wire....you might be able to get away with it even if the ecu does use the idl wire.

Check and make sure the hayabusa tps operates in the same voltage range.

MR2enV · 09-12-2009, 12:57 PM

See i knew you culd help..... What is the voltage range on a toyota tps? hayabusa is 0-5v range..... Do you have a ecu pin out diagram for the 3sge...? or can I just find out with a multimeter fro the tps..

MR2enV · 09-14-2009, 09:04 PM

another thing.... Does the idle speed sensor have to receive vac from all four runners or just one?

MR2enV · 09-18-2009, 02:30 PM

for pics look at 3sge build

09-11-2009, 12:22 AM	#1 (permalink)
MR2enV WHY SO SERIOUS? Join Date: Mar 2007 Location: Miramar, Florida Posts: 443 Thanks: 0 Thanked 6 Times in 6 Posts iTrader Rating: (3/80% )	3sge ITB stump..TPS HELP!! GURUs Okay the itbs are being made utilizing the bottom half of the intake manifold... the isc will run to each runner for correct readings.. The only stump is I dont know what to do about the tps..... Toyota tps are 4 wire and Hayabusa's utilize a 3 wire.... Can I wire up the three wire or do I need the 4 wire...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-11-2009, 12:27 PM	#2 (permalink)
mrjimmyx Cage Fighter Join Date: Jul 2009 Posts: 192 Thanks: 3 Thanked 8 Times in 8 Posts iTrader Rating: (0/0% )	sweet! i like to keep updated about this.

09-11-2009, 01:30 PM	#3 (permalink)
MR2enV WHY SO SERIOUS? Join Date: Mar 2007 Location: Miramar, Florida Posts: 443 Thanks: 0 Thanked 6 Times in 6 Posts iTrader Rating: (3/80% )	Anyone.... mr220v maybe could help

09-11-2009, 01:59 PM	#4 (permalink)
mr220v Beams Owners Group Join Date: Mar 2006 Posts: 1,791 Thanks: 13 Thanked 139 Times in 117 Posts iTrader Rating: (9/100% )	If you 3sge ecu doesn't use the idl pin on the tps, then you might be able to get away with the 3 wire....you might be able to get away with it even if the ecu does use the idl wire. Check and make sure the hayabusa tps operates in the same voltage range.

09-12-2009, 12:57 PM	#5 (permalink)
MR2enV WHY SO SERIOUS? Join Date: Mar 2007 Location: Miramar, Florida Posts: 443 Thanks: 0 Thanked 6 Times in 6 Posts iTrader Rating: (3/80% )	See i knew you culd help..... What is the voltage range on a toyota tps? hayabusa is 0-5v range..... Do you have a ecu pin out diagram for the 3sge...? or can I just find out with a multimeter fro the tps..

09-14-2009, 09:04 PM	#6 (permalink)
MR2enV WHY SO SERIOUS? Join Date: Mar 2007 Location: Miramar, Florida Posts: 443 Thanks: 0 Thanked 6 Times in 6 Posts iTrader Rating: (3/80% )	another thing.... Does the idle speed sensor have to receive vac from all four runners or just one?

09-18-2009, 02:30 PM	#7 (permalink)
MR2enV WHY SO SERIOUS? Join Date: Mar 2007 Location: Miramar, Florida Posts: 443 Thanks: 0 Thanked 6 Times in 6 Posts iTrader Rating: (3/80% )	for pics look at 3sge build