exhaust

Dillyumpshous · 05-12-2006, 10:32 PM

can you put a turbo exhaust on a non turbo mr2.. i know that some will fit but would the Garage Fukui SPL Departure II fit ?

91T_SW20 · 05-12-2006, 10:36 PM

huh????

You mean an N/A Mr2?

Dillyumpshous · 05-12-2006, 10:37 PM

edited..

Raptor13x · 05-13-2006, 06:29 AM

I'm 90% sure it won't fit, but I've never tried it.

CyFi · 05-13-2006, 03:08 PM

lots of people put the turbo exhaust on the NA for the sound, im doing this soon actually. it gives it a little louder/deeper sound. THe pipeing is a different size so you will have to adapt it

TomsMR2 · 05-13-2006, 06:00 PM

turbo exhausts are fine if you dont mind losing a bunch of torque, and having an obnoxiously loud car... you're certainly not helping yourself any with one.

Dillyumpshous · 05-13-2006, 08:58 PM

Quote:

Originally Posted by CyFi

lots of people put the turbo exhaust on the NA for the sound, im doing this soon actually. it gives it a little louder/deeper sound. THe pipeing is a different size so you will have to adapt it

what exhaust you planning to get?

CyFi · 05-13-2006, 11:01 PM

oh, i thought you meant putting the stock turbo echaust, thats what im doing

TomsMR2 · 05-14-2006, 02:01 AM

.. oh if you're just putting on the stock muffler, thats fine.. just gotta weld in an approx. 3 inch section.. no big deal, a shop might charge you 30-40 bucks. that'd actually be an upgrade, sounds good too.

Raptor13x · 05-14-2006, 04:51 AM

It probably won't make a heck of a lot of difference however.

TRD-CEO · 06-05-2006, 12:44 AM

Wait for Wednesday! Base dino run at 3pm....Header and exhaust installed later that day...second dyno...pics and sound clips will be posted (as soon as i figure out how hahaha) No seroiusly...as soon as I figure out how. I figured out how. Look in the 5sfe section under the blog DYNO

I have posted before and after vid clips of the header. I will post the exhaust there and here after I go tomorrow. SSAutochrome is working with me to get a full stainless, tiged b-pipe so that their 3" exhaust is a direct bolt on to the N/A. )they said it was when I bought it...but it wasn't and they have been great to work with in getting the corrected part. They even paid for me to having the crappy b-pipe made, so they could get a copy and make a completed set for us N/Aer.

Full Stainless - dual muffs that are just bad *** from the rear view and sounds increadible - all for just $350 off e-bay. They start at $325 and I have seen them go as high as $450. They sell them directly off their web site for $650, but if you don't mind waiting to bid it's well worth the wait.

05-12-2006, 10:32 PM	#1 (permalink)
Dillyumpshous ALL MOTOR Join Date: Apr 2006 Posts: 139 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (1/100% )	exhaust can you put a turbo exhaust on a non turbo mr2.. i know that some will fit but would the Garage Fukui SPL Departure II fit ?

06-05-2006, 12:44 AM	#11 (permalink)
TRD-CEO Need a home? Join Date: Oct 2005 Location: Charlotte Posts: 205 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	Wait for Wednesday! Base dino run at 3pm....Header and exhaust installed later that day...second dyno...pics and sound clips will be posted (as soon as i figure out how hahaha) No seroiusly...as soon as I figure out how. I figured out how. Look in the 5sfe section under the blog DYNO I have posted before and after vid clips of the header. I will post the exhaust there and here after I go tomorrow. SSAutochrome is working with me to get a full stainless, tiged b-pipe so that their 3" exhaust is a direct bolt on to the N/A. )they said it was when I bought it...but it wasn't and they have been great to work with in getting the corrected part. They even paid for me to having the crappy b-pipe made, so they could get a copy and make a completed set for us N/Aer. Full Stainless - dual muffs that are just bad *** from the rear view and sounds increadible - all for just $350 off e-bay. They start at $325 and I have seen them go as high as $450. They sell them directly off their web site for $650, but if you don't mind waiting to bid it's well worth the wait. Last edited by TRD-CEO; 06-20-2006 at 06:44 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-12-2006, 10:36 PM	#2 (permalink)
91T_SW20 Midship Runabout Join Date: Nov 2005 Location: NorCal Posts: 592 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	huh???? You mean an N/A Mr2?

05-12-2006, 10:37 PM	#3 (permalink)
Dillyumpshous ALL MOTOR Join Date: Apr 2006 Posts: 139 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (1/100% )	edited..

05-13-2006, 06:29 AM	#4 (permalink)
Raptor13x Show me your genitals Join Date: Apr 2006 Location: 50 miles east of Hell, 2 hours from Climax Posts: 3,574 Thanks: 6 Thanked 35 Times in 30 Posts My Google Map iTrader Rating: (2/100% )	I'm 90% sure it won't fit, but I've never tried it.

05-13-2006, 03:08 PM	#5 (permalink)
CyFi Hypnotize minds! Join Date: Oct 2005 Posts: 1,361 Thanks: 12 Thanked 36 Times in 34 Posts iTrader Rating: (10/100% )	lots of people put the turbo exhaust on the NA for the sound, im doing this soon actually. it gives it a little louder/deeper sound. THe pipeing is a different size so you will have to adapt it

05-13-2006, 06:00 PM	#6 (permalink)
TomsMR2 Formerly Tom Brokaw Join Date: Feb 2005 Location: Bay Area Posts: 2,040 Thanks: 8 Thanked 152 Times in 129 Posts Blog Entries: 1 iTrader Rating: (0/0% )	turbo exhausts are fine if you dont mind losing a bunch of torque, and having an obnoxiously loud car... you're certainly not helping yourself any with one.

05-13-2006, 11:01 PM	#8 (permalink)
CyFi Hypnotize minds! Join Date: Oct 2005 Posts: 1,361 Thanks: 12 Thanked 36 Times in 34 Posts iTrader Rating: (10/100% )	oh, i thought you meant putting the stock turbo echaust, thats what im doing

05-14-2006, 02:01 AM	#9 (permalink)
TomsMR2 Formerly Tom Brokaw Join Date: Feb 2005 Location: Bay Area Posts: 2,040 Thanks: 8 Thanked 152 Times in 129 Posts Blog Entries: 1 iTrader Rating: (0/0% )	.. oh if you're just putting on the stock muffler, thats fine.. just gotta weld in an approx. 3 inch section.. no big deal, a shop might charge you 30-40 bucks. that'd actually be an upgrade, sounds good too.

05-14-2006, 04:51 AM	#10 (permalink)
Raptor13x Show me your genitals Join Date: Apr 2006 Location: 50 miles east of Hell, 2 hours from Climax Posts: 3,574 Thanks: 6 Thanked 35 Times in 30 Posts My Google Map iTrader Rating: (2/100% )	It probably won't make a heck of a lot of difference however.