My NA..

tancred · 10-22-2006, 05:31 PM

Quick Little Video

http://www.youtube.com/watch?v=QRSR_K3RNDM

91 5SFE - 206,532 miles
Turbo XS Headers + B-pipe Catless
Apexi Powercone Attached at the TB. (Air Intake Temp Outside Engine bay).
Lowered with Tein Springs and supported by KYB AGXs.
Skyliine R32 Rims.
Toyo Proxes 4 Tires

I was supposed to hit the dyno yesterday....but the shop changed owners. And they called the thing off...So I will have to take my camera and go play around.

Hiighboost2 · 10-22-2006, 05:38 PM

Your 2 is lookin mighty clean, video isnt workin yet but it said you might need to wait a little while if its just been uploaded.

tancred · 10-22-2006, 05:39 PM

Just got it uploaded like 5 mins ago...damn in that picture my tires look like balloons..lol....205/50/16s...in the front...215s in the rear...I guess I need to put some 40s on there and lower it down..when I put those rims and tires on it lifted my car higher then riding with my 14s on..lol.

Few minutes turning into a few hours for that video to post!

bean · 10-22-2006, 11:04 PM

Hey can you tell me the model no. of the apexi intake and where you bought it? I'm interested in purchasing one for my 91 N/A but wasn't sure that the Turbo one would fit.

tancred · 10-22-2006, 11:14 PM

I got the universal 3" And bought a 3" to 2.5 reducer...a real silicon one, trimmed the BOV recirculator off it and just clamped it on.....

bean · 10-23-2006, 12:01 AM

Was it still necessary to take the trim panel off?
Did your local auto parts have the reducer or did you have to order it?

Does it matter which one of these I purchase?
UNIVERSAL FILTER AND 75MM FLANGE #131593
UNIVERSAL FILTER AND 70MM FLANGE #131594

tancred · 10-23-2006, 12:09 AM

I have the 70mm....I bought the reducer on ebay, I bought a real silicon one, for like 15 bucks, it was off my turbo car. You can get a reducer from autozone or something like that for 6-7 bucks, the rubber kind is fine for a NA engine..I didnt have to take the trim panel off..

bean · 10-23-2006, 10:18 AM

thanks for all the help, it looks great btw.

fidget · 10-23-2006, 11:35 AM

The rims look great.. Did they need to be shimmed or did they just bolt up?

tancred · 10-23-2006, 03:50 PM

Didnt need to do anything, rims bolted right up

Mister2.2 · 10-23-2006, 10:14 PM

Rims do look good, got the specs on them?

tancred · 10-24-2006, 08:31 AM

16x6.5 5x114.3

10-22-2006, 05:31 PM	#1 (permalink)
tancred MR2 Curious Join Date: Aug 2006 Posts: 63 Thanks: 0 Thanked 1 Time in 1 Post My Google Map iTrader Rating: (0/0% )	My NA.. Quick Little Video http://www.youtube.com/watch?v=QRSR_K3RNDM 91 5SFE - 206,532 miles Turbo XS Headers + B-pipe Catless Apexi Powercone Attached at the TB. (Air Intake Temp Outside Engine bay). Lowered with Tein Springs and supported by KYB AGXs. Skyliine R32 Rims. Toyo Proxes 4 Tires I was supposed to hit the dyno yesterday....but the shop changed owners. And they called the thing off...So I will have to take my camera and go play around.

10-22-2006, 05:39 PM	#3 (permalink)
tancred MR2 Curious Join Date: Aug 2006 Posts: 63 Thanks: 0 Thanked 1 Time in 1 Post My Google Map iTrader Rating: (0/0% )	Just got it uploaded like 5 mins ago...damn in that picture my tires look like balloons..lol....205/50/16s...in the front...215s in the rear...I guess I need to put some 40s on there and lower it down..when I put those rims and tires on it lifted my car higher then riding with my 14s on..lol. Few minutes turning into a few hours for that video to post! Last edited by tancred; 10-22-2006 at 06:45 PM..

10-23-2006, 12:01 AM	#6 (permalink)
bean 91 NA Hardtop Join Date: Oct 2006 Location: SC Posts: 531 Thanks: 17 Thanked 15 Times in 14 Posts iTrader Rating: (3/100% )	Was it still necessary to take the trim panel off? Did your local auto parts have the reducer or did you have to order it? Does it matter which one of these I purchase? UNIVERSAL FILTER AND 75MM FLANGE #131593 UNIVERSAL FILTER AND 70MM FLANGE #131594 Last edited by bean; 10-23-2006 at 12:07 AM..

10-23-2006, 10:14 PM	#11 (permalink)
Mister2.2 Cheese it! Join Date: Feb 2005 Posts: 6,561 Thanks: 121 Thanked 115 Times in 99 Posts Blog Entries: 1 My Google Map iTrader Rating: (3/100% )	Rims do look good, got the specs on them? __________________ --Josh MR2Trader.com Free to Buy and Sell your MR2 Parts!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-22-2006, 05:38 PM	#2 (permalink)
Hiighboost2 Wiring fun! Join Date: Feb 2006 Location: Spring, Tx Posts: 1,415 Thanks: 11 Thanked 21 Times in 21 Posts My Google Map iTrader Rating: (4/100% )	Your 2 is lookin mighty clean, video isnt workin yet but it said you might need to wait a little while if its just been uploaded.

10-22-2006, 11:04 PM	#4 (permalink)
bean 91 NA Hardtop Join Date: Oct 2006 Location: SC Posts: 531 Thanks: 17 Thanked 15 Times in 14 Posts iTrader Rating: (3/100% )	Hey can you tell me the model no. of the apexi intake and where you bought it? I'm interested in purchasing one for my 91 N/A but wasn't sure that the Turbo one would fit.

10-22-2006, 11:14 PM	#5 (permalink)
tancred MR2 Curious Join Date: Aug 2006 Posts: 63 Thanks: 0 Thanked 1 Time in 1 Post My Google Map iTrader Rating: (0/0% )	I got the universal 3" And bought a 3" to 2.5 reducer...a real silicon one, trimmed the BOV recirculator off it and just clamped it on.....

10-23-2006, 12:09 AM	#7 (permalink)
tancred MR2 Curious Join Date: Aug 2006 Posts: 63 Thanks: 0 Thanked 1 Time in 1 Post My Google Map iTrader Rating: (0/0% )	I have the 70mm....I bought the reducer on ebay, I bought a real silicon one, for like 15 bucks, it was off my turbo car. You can get a reducer from autozone or something like that for 6-7 bucks, the rubber kind is fine for a NA engine..I didnt have to take the trim panel off..

10-23-2006, 10:18 AM	#8 (permalink)
bean 91 NA Hardtop Join Date: Oct 2006 Location: SC Posts: 531 Thanks: 17 Thanked 15 Times in 14 Posts iTrader Rating: (3/100% )	thanks for all the help, it looks great btw.

10-23-2006, 11:35 AM	#9 (permalink)
fidget No Skills Join Date: Oct 2006 Location: Jacksonville Florida Posts: 251 Thanks: 14 Thanked 8 Times in 8 Posts iTrader Rating: (1/100% )	The rims look great.. Did they need to be shimmed or did they just bolt up?

10-23-2006, 03:50 PM	#10 (permalink)
tancred MR2 Curious Join Date: Aug 2006 Posts: 63 Thanks: 0 Thanked 1 Time in 1 Post My Google Map iTrader Rating: (0/0% )	Didnt need to do anything, rims bolted right up

10-24-2006, 08:31 AM	#12 (permalink)
tancred MR2 Curious Join Date: Aug 2006 Posts: 63 Thanks: 0 Thanked 1 Time in 1 Post My Google Map iTrader Rating: (0/0% )	16x6.5 5x114.3