I need some valves

Jay-Spec1 · 02-21-2007, 06:41 AM

Where can i get some over size valves for my 5sfe, i tried searching but all i find r the 3sgte valves, please help

ToyotaTechGeek · 02-21-2007, 08:33 AM

i'm trying to remember who i had custom make me my set of stainless exhaust valves for my Tercel...

TomsMR2 · 02-21-2007, 10:27 AM

you can use all the 3sgte aftermarket valves. you'll drain your wallet/time looking for specific 5sfe valves.

the 93+ heads are said to use 2jzgte valves, as the head design is a little different. 91/92 will accept 3sgte valves though, they're 1mm OS.

you really cant go to big.. im not even sure if you could go 2mm on both sides, the valves are pretty close. just from eye balling it, you might get away with 2mm on the intake, and 1mm on the exhaust.. so dont hunt too hard, the 3sgte valves are a pretty good choice.

02-21-2007, 06:41 AM	#1 (permalink)
Jay-Spec1 No Skills Join Date: Sep 2006 Posts: 149 Thanks: 6 Thanked 1 Time in 1 Post iTrader Rating: (0/0% )	I need some valves Where can i get some over size valves for my 5sfe, i tried searching but all i find r the 3sgte valves, please help

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-21-2007, 08:33 AM	#2 (permalink)
ToyotaTechGeek resident GEEK! Join Date: Mar 2005 Location: ...boosting mid-corner Posts: 995 Thanks: 14 Thanked 31 Times in 31 Posts My Google Map iTrader Rating: (2/100% )	i'm trying to remember who i had custom make me my set of stainless exhaust valves for my Tercel...

02-21-2007, 10:27 AM	#3 (permalink)
TomsMR2 Still not heraldo. Join Date: Feb 2005 Location: Pineapple under the sea Posts: 4,911 Thanks: 18 Thanked 406 Times in 303 Posts Blog Entries: 1 iTrader Rating: (4/100% )	you can use all the 3sgte aftermarket valves. you'll drain your wallet/time looking for specific 5sfe valves. the 93+ heads are said to use 2jzgte valves, as the head design is a little different. 91/92 will accept 3sgte valves though, they're 1mm OS. you really cant go to big.. im not even sure if you could go 2mm on both sides, the valves are pretty close. just from eye balling it, you might get away with 2mm on the intake, and 1mm on the exhaust.. so dont hunt too hard, the 3sgte valves are a pretty good choice.