MR2 Turbo Fog Lights

edwadowad · 05-14-2007, 05:29 PM

Is it possible to mount the MR2 Turbo Fog Lights on a stock 91 NA MR2? If so can someone please give me instructions?

Davis · 05-14-2007, 06:52 PM

I know you can as long as you have the fuse for it. The fuse is in the frunk if you want to check it out.

jrs2 · 05-14-2007, 07:13 PM

That's actually the fog light relay in the frunk fuse box. It will say fog lights on the space it goes in. You can also look for the fog light connectors where the lights mount. If you're pre-wired, it's easy.

Davis · 05-14-2007, 07:14 PM

^oooo i see, thanks for clearing that up for me.

edwadowad · 05-14-2007, 09:05 PM

Are mounting brackets required or do they just bolt on ?

bean · 05-14-2007, 10:51 PM

check out the other thread which i'm too lazy to find.

edwadowad · 05-16-2007, 03:17 AM

Quote:

Originally Posted by jrs2

That's actually the fog light relay in the frunk fuse box. It will say fog lights on the space it goes in. You can also look for the fog light connectors where the lights mount. If you're pre-wired, it's easy.

Do most 91 N/A MR2's come with connectors? If not then how would i get them to work ?

PearlJammzz · 05-16-2007, 03:21 AM

A lot of them did, but not all. Open yer frunk and look in the fuse box. If you see yellow inside where the relay is supposed to go, you're in luck. If not, yer screwed. You can also see the connector if you take off the headlight cover and look in

.

jrs2 · 05-16-2007, 02:58 PM

If you're not pre-wired you're not totally screwed, just have more work to do. I think there's a good writeup on the other board on this.

Slidealliance · 05-16-2007, 03:05 PM

Pull the front under panel off and look up toward the sidemarker/turn signal wiring. If you see some wiring that is coiled up/taped together with a little white plug that is not in use, thats it. Look up under your dash to find the switch plug, place the relay/fuse in the frunk and flip the switch. If it doesnt work, check the relay/fuse first, then check the wiring and finally the foglights themselves. Good luck.

05-14-2007, 05:29 PM	#1 (permalink)
edwadowad No Skills Join Date: May 2007 Posts: 13 Thanks: 3 Thanked 0 Times in 0 Posts iTrader Rating: (1/100% )	MR2 Turbo Fog Lights Is it possible to mount the MR2 Turbo Fog Lights on a stock 91 NA MR2? If so can someone please give me instructions?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-14-2007, 06:52 PM	#2 (permalink)
Davis Radical Dreamer Join Date: Nov 2006 Location: Long Beach, California Posts: 4,536 Thanks: 85 Thanked 125 Times in 113 Posts My Google Map iTrader Rating: (7/100% )	I know you can as long as you have the fuse for it. The fuse is in the frunk if you want to check it out.

05-14-2007, 07:13 PM	#3 (permalink)
jrs2 Some Skills Join Date: Apr 2007 Location: California Posts: 58 Thanks: 0 Thanked 9 Times in 8 Posts iTrader Rating: (0/0% )	That's actually the fog light relay in the frunk fuse box. It will say fog lights on the space it goes in. You can also look for the fog light connectors where the lights mount. If you're pre-wired, it's easy.

05-14-2007, 07:14 PM	#4 (permalink)
Davis Radical Dreamer Join Date: Nov 2006 Location: Long Beach, California Posts: 4,536 Thanks: 85 Thanked 125 Times in 113 Posts My Google Map iTrader Rating: (7/100% )	^oooo i see, thanks for clearing that up for me.

05-14-2007, 09:05 PM	#5 (permalink)
edwadowad No Skills Join Date: May 2007 Posts: 13 Thanks: 3 Thanked 0 Times in 0 Posts iTrader Rating: (1/100% )	Are mounting brackets required or do they just bolt on ?

05-14-2007, 10:51 PM	#6 (permalink)
bean 91 NA Hardtop Join Date: Oct 2006 Location: SC Posts: 531 Thanks: 17 Thanked 15 Times in 14 Posts iTrader Rating: (3/100% )	check out the other thread which i'm too lazy to find.

05-16-2007, 03:21 AM	#8 (permalink)
PearlJammzz Cage Fighter Join Date: Feb 2006 Posts: 2,115 Thanks: 9 Thanked 74 Times in 69 Posts My Google Map iTrader Rating: (7/100% )	A lot of them did, but not all. Open yer frunk and look in the fuse box. If you see yellow inside where the relay is supposed to go, you're in luck. If not, yer screwed. You can also see the connector if you take off the headlight cover and look in .

05-16-2007, 02:58 PM	#9 (permalink)
jrs2 Some Skills Join Date: Apr 2007 Location: California Posts: 58 Thanks: 0 Thanked 9 Times in 8 Posts iTrader Rating: (0/0% )	If you're not pre-wired you're not totally screwed, just have more work to do. I think there's a good writeup on the other board on this.

05-16-2007, 03:05 PM	#10 (permalink)
Slidealliance Hot chicks love me Join Date: Dec 2006 Location: California, Colorado Posts: 786 Thanks: 1 Thanked 16 Times in 16 Posts My Google Map iTrader Rating: (2/100% )	Pull the front under panel off and look up toward the sidemarker/turn signal wiring. If you see some wiring that is coiled up/taped together with a little white plug that is not in use, thats it. Look up under your dash to find the switch plug, place the relay/fuse in the frunk and flip the switch. If it doesnt work, check the relay/fuse first, then check the wiring and finally the foglights themselves. Good luck.