Individual throttle bodys?!

fvillota · 02-19-2009, 04:01 PM

hey guys is it possible to install ITBs in our cars ?

just was reading a few things but ive only see a black top with his

randomxzero · 02-19-2009, 04:31 PM

ya i have the same ? but for the 4age..
i know corollas have them but will it his the wall inside the negine bay if i were to fit them in there??

TomsMR2 · 02-19-2009, 06:03 PM

yes, its possible.

fvillota · 02-19-2009, 10:13 PM

is it something i need to make custom or is there a kit?

killermillermr2 · 02-19-2009, 10:18 PM

fvillota, I have never seen individual TB's on a 5s. most of the ones i have seen (corollas)were on a 4age.

anything you would do here would be custom. I highly dought someone would make a 5s kit.

the 4age setup is on ebay all the time. (again for corollas)

fvillota · 02-19-2009, 11:17 PM

yea thats what ive seen. like the silver and black tops.

umm.. wouls this be of any benefit?

Drew · 02-20-2009, 04:10 AM

not without supporting mods and a really good tune. And tuning ITB's is a real pain IDB.

TomsMR2 · 02-20-2009, 07:54 AM

tuning itb's isnt a pain.. actually its really, really easy. one of the big benefits of itbs is how easy they are to tune. you just bolt on new runners for a different length, instead of having to buy a completely new manifold with a conventional setup.

the manifold IS too small. it flows bad, it plugs off, it has an unreasonable inlet... but the cams are 10 times more problematic, address those first.

fvillota · 02-20-2009, 09:03 AM

ok thanks alot to all!

Drew · 02-20-2009, 11:53 AM

i guess tuning ITBs on Volkswagens and Hondas is different than tuning ITB's on Toyotas. Then again, im used to carbs and plenum setups using MAP/MAF setups. I wouldn't recommend ITB's on a daily however.

Whats your technique for tuning the little devils? I guess it's all the same but different in it's own right. Church, priest, tabernacle, ya dig

Jcamry94 · 03-23-2009, 07:28 PM

Here's a 5s-fe Camry with ITB's...

Sounds SICK IMO

MOV00896.flv video by cascadedhart - Photobucket

killermillermr2 · 03-23-2009, 08:38 PM

Cool

Jcamry94 · 03-23-2009, 10:27 PM

Quote:

Originally Posted by killermillermr2

Cool

Not as cool as an MR2 with itbs! BUT nonetheless, it is nice

killermillermr2 · 03-24-2009, 01:08 AM

fvillota · 03-24-2009, 01:49 PM

damnn thats sexyy as hell thats what i want!!! anyone wanna help me out? lol.. u think i can get some from another car and make it work? or is it gonna take alot of work?

Jcamry94 · 03-24-2009, 05:30 PM

Quote:

Originally Posted by fvillota

damnn thats sexyy as hell thats what i want!!! anyone wanna help me out? lol.. u think i can get some from another car and make it work? or is it gonna take alot of work?

Best bet is to join a honda forum like I did and learn from them, OR contact some 4AGE guys, I know they sport ITB's regularly.

I PMed this dude about his camry a long time ago and he told me it was A LOT of custom fabbing, which I could imagine.

The itbs came off of a suzuki something or other, but I believe you can get em off of most sport bikes, as long as you tune 'em, and put socks on 'em!

Also: (not as clear as the camry vid) but I found this...

YouTube - ITBs on a 5SFE MR2

fvillota · 03-25-2009, 07:44 AM

by tune them what do you mean? man thats really cool. im gonna se if i talk to a few ppl and do this.

02-19-2009, 04:01 PM	#1 (permalink)
fvillota Did you just press that? Join Date: Feb 2008 Location: Miami Posts: 2,539 Thanks: 73 Thanked 52 Times in 52 Posts iTrader Rating: (11/100% )	Individual throttle bodys?! hey guys is it possible to install ITBs in our cars ? just was reading a few things but ive only see a black top with his

02-19-2009, 06:03 PM	#3 (permalink)
TomsMR2 Still not heraldo. Join Date: Feb 2005 Location: Pineapple under the sea Posts: 4,912 Thanks: 18 Thanked 406 Times in 303 Posts Blog Entries: 1 iTrader Rating: (4/100% )	yes, its possible. __________________ Science fact: If you took all the veins from your body and laid them end to end, you would die.

03-23-2009, 07:28 PM	#11 (permalink)
Jcamry94 Lookin for an mR2 Join Date: Dec 2008 Location: SoCal, usa Posts: 77 Thanks: 5 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	Here ya go... Here's a 5s-fe Camry with ITB's... Sounds SICK IMO MOV00896.flv video by cascadedhart - Photobucket

03-24-2009, 01:08 AM	#14 (permalink)
killermillermr2 Honda Hunter Join Date: Dec 2007 Location: Colorado Posts: 864 Thanks: 25 Thanked 28 Times in 28 Posts iTrader Rating: (10/100% )	true

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-19-2009, 04:31 PM	#2 (permalink)
randomxzero 562 Understeer Join Date: Sep 2008 Location: 562 Posts: 1,171 Thanks: 10 Thanked 5 Times in 5 Posts iTrader Rating: (1/100% )	ya i have the same ? but for the 4age.. i know corollas have them but will it his the wall inside the negine bay if i were to fit them in there??

02-19-2009, 10:13 PM	#4 (permalink)
fvillota Did you just press that? Join Date: Feb 2008 Location: Miami Posts: 2,539 Thanks: 73 Thanked 52 Times in 52 Posts iTrader Rating: (11/100% )	is it something i need to make custom or is there a kit?

02-19-2009, 10:18 PM	#5 (permalink)
killermillermr2 Honda Hunter Join Date: Dec 2007 Location: Colorado Posts: 864 Thanks: 25 Thanked 28 Times in 28 Posts iTrader Rating: (10/100% )	fvillota, I have never seen individual TB's on a 5s. most of the ones i have seen (corollas)were on a 4age. anything you would do here would be custom. I highly dought someone would make a 5s kit. the 4age setup is on ebay all the time. (again for corollas)

02-19-2009, 11:17 PM	#6 (permalink)
fvillota Did you just press that? Join Date: Feb 2008 Location: Miami Posts: 2,539 Thanks: 73 Thanked 52 Times in 52 Posts iTrader Rating: (11/100% )	yea thats what ive seen. like the silver and black tops. umm.. wouls this be of any benefit?

02-20-2009, 04:10 AM	#7 (permalink)
Drew \_/ - Care cup is empty Join Date: Nov 2008 Location: Louisville, Ky / New Smyrna Beach, Fl Posts: 114 Thanks: 11 Thanked 2 Times in 2 Posts My Google Map iTrader Rating: (0/0% )	not without supporting mods and a really good tune. And tuning ITB's is a real pain IDB.

02-20-2009, 07:54 AM	#8 (permalink)
TomsMR2 Still not heraldo. Join Date: Feb 2005 Location: Pineapple under the sea Posts: 4,912 Thanks: 18 Thanked 406 Times in 303 Posts Blog Entries: 1 iTrader Rating: (4/100% )	tuning itb's isnt a pain.. actually its really, really easy. one of the big benefits of itbs is how easy they are to tune. you just bolt on new runners for a different length, instead of having to buy a completely new manifold with a conventional setup. the manifold IS too small. it flows bad, it plugs off, it has an unreasonable inlet... but the cams are 10 times more problematic, address those first.

02-20-2009, 09:03 AM	#9 (permalink)
fvillota Did you just press that? Join Date: Feb 2008 Location: Miami Posts: 2,539 Thanks: 73 Thanked 52 Times in 52 Posts iTrader Rating: (11/100% )	ok thanks alot to all!

02-20-2009, 11:53 AM	#10 (permalink)
Drew \_/ - Care cup is empty Join Date: Nov 2008 Location: Louisville, Ky / New Smyrna Beach, Fl Posts: 114 Thanks: 11 Thanked 2 Times in 2 Posts My Google Map iTrader Rating: (0/0% )	i guess tuning ITBs on Volkswagens and Hondas is different than tuning ITB's on Toyotas. Then again, im used to carbs and plenum setups using MAP/MAF setups. I wouldn't recommend ITB's on a daily however. Whats your technique for tuning the little devils? I guess it's all the same but different in it's own right. Church, priest, tabernacle, ya dig

03-23-2009, 08:38 PM	#12 (permalink)
killermillermr2 Honda Hunter Join Date: Dec 2007 Location: Colorado Posts: 864 Thanks: 25 Thanked 28 Times in 28 Posts iTrader Rating: (10/100% )	Cool

03-24-2009, 01:49 PM	#15 (permalink)
fvillota Did you just press that? Join Date: Feb 2008 Location: Miami Posts: 2,539 Thanks: 73 Thanked 52 Times in 52 Posts iTrader Rating: (11/100% )	damnn thats sexyy as hell thats what i want!!! anyone wanna help me out? lol.. u think i can get some from another car and make it work? or is it gonna take alot of work?

03-25-2009, 07:44 AM	#17 (permalink)
fvillota Did you just press that? Join Date: Feb 2008 Location: Miami Posts: 2,539 Thanks: 73 Thanked 52 Times in 52 Posts iTrader Rating: (11/100% )	by tune them what do you mean? man thats really cool. im gonna se if i talk to a few ppl and do this.