Do turn signals have fuse?

[MR2 Drifter]

For some reason my left turn signal works fine

but my right turn signal only works with the tail light, it won't light up my front (clear corner) light and for some reason it blinks fast in the gauge (compared to the left 1)

so im wondering if I blew a fuse or something?

any help would be appreciated

[muffinman]

fast blinking is an indicator that a bulb is out so if the front right is out replace the bulb and it will go back to normal blinking.

[Sh0ty]

Turn signals do have fuses (not the problem though) and can be found in the fuse box next to your left foot on the driver's side (right above the frunk release latch). Try replacing the bulb and see if you still have issues with the light being attached to the tail lights. Something to consider: the turn signals are linked to the hazard switch (disconnect the hazard button, no more turn signals) and may be linked to other circuits as well. I'd check some of those if you can't fix the issue with just the signal.

[muffinman]

Originally Posted by Sh0ty

Turn signals do have fuses (not the problem though) and can be found in the fuse box next to your left foot on the driver's side (right above the frunk release latch). Try replacing the bulb and see if you still have issues with the light being attached to the tail lights. Something to consider: the turn signals are linked to the hazard switch (disconnect the hazard button, no more turn signals) and may be linked to other circuits as well. I'd check some of those if you can't fix the issue with just the signal.

Yes there is a fuse but if it's blinking fast on one side , 100% of the time it's a bad bulb so no reason to take anything else apart.

[Sh0ty]

Right (read the first set of parentheses) just trying to add what little I know.

[MR2 Drifter]

cool thanks 4 the help