T3 turbo on my 5s-fe

fvillota · 05-28-2009, 02:13 PM

hi guys. i have a t3 turbo
as you know im trying to cleect everything to make my 5s-fe a 5sfte.

I want to know if i will have to cut and weld the flange when i guy the 3sgte manifold so i can bolt on the t3 turbo.

would it just fit up or no?

what about the downpipe?

Redstar · 05-28-2009, 03:12 PM

You will need an adapter.

I'll help you hone your Google-Fu.
Google "ct26 to t3" like this: Your search results! and you should come up with a number of viable options for adapting your T3 turbo to the stock Toyota turbo manifold.

Most turbo familes have specific exhaust and downpipe flanges. Manifolds and downpipes designed for the stock toyota turbo (CT26) will not bolt onto a T3 based turbo.

Discalimer: I'm bored and having a long day, please don't take the link I posted the wrong way.

fvillota · 05-28-2009, 03:19 PM

so i will have to make my own t3 custon downpipe?

Redstar · 05-28-2009, 04:04 PM

Don't know.
It will likely depend on what T3 turbo you have. The T3 is probably the most common turbo out there so there are dozens of varieties. However, there are MR2 specific downpipes for T3/T4's. Maybe contact one of the vendors on this board to see if they make a downpipe that will fit your turbo.

fvillota · 05-28-2009, 06:42 PM

ok thanks alot for all ur help! i'll look more into this.

SW21T · 05-28-2009, 07:00 PM

you might have to, I have to for mine, I have the t3 t4 turbo

fvillota · 05-28-2009, 10:06 PM

what about the adapters from a ct to a t3 with a waste gate port?
would everything still fit the right way?

SW21T · 05-28-2009, 10:09 PM

It should but why don't you cut and weld flanges that way you got the t3 flange with no adapters

fvillota · 05-28-2009, 10:11 PM

because i cant seem to find a welder i like. lol

SW21T · 05-28-2009, 10:20 PM

Oh LOL I got a buddy to weld all my stuff at his work, turned out nice especially when he made the wastegated adapter to my turbo manifold, Looked like if it came with one

fvillota · 05-28-2009, 10:37 PM

lol yea thats my problem. i have no one.

SW21T · 05-28-2009, 10:43 PM

you don't have local welding shops?

killermillermr2 · 05-28-2009, 10:47 PM

too bad your not close to CO. id do it for ya.

fvillota · 05-28-2009, 10:58 PM

Quote:

Originally Posted by YELLOW_MR2

you don't have local welding shops?

umm.. yes and no.. i just hate these cuban wanna be welders that have never seen a turbo in there life.
all they do is weld honda mufflers all day.
i want my **** done right.

fvillota · 05-28-2009, 10:59 PM

Quote:

Originally Posted by killermillermr2

too bad your not close to CO. id do it for ya.

thanks bro.

SW21T · 05-28-2009, 11:02 PM

Quote:

Originally Posted by fvillota

umm.. yes and no.. i just hate these cuban wanna be welders that have never seen a turbo in there life.
all they do is weld honda mufflers all day.
i want my **** done right.

I know what you mean, I've been to miami once. You should search mayber theres a good spot where it can be done, It's a huge place. There has to be one.

fvillota · 05-28-2009, 11:03 PM

yea i know. i have to look into that. for now i just want to get all the knowledge i can get so i wont run into problems.
and collect everything at the same time.
was the msd hard to wire?

SW21T · 05-28-2009, 11:05 PM

Haven't wired mine yet.
ask killer, he got his done

fvillota · 05-28-2009, 11:07 PM

Quote:

Originally Posted by YELLOW_MR2

Haven't wired mine yet.
ask killer, he got his done

ok cool cool.

killermillermr2 · 05-29-2009, 01:02 AM

Take alook at this:http://www.mr2.com/forums/efi-corner...tall-help.html

05-28-2009, 02:13 PM	#1 (permalink)
fvillota Did you just press that? Join Date: Feb 2008 Location: Miami Posts: 2,539 Thanks: 73 Thanked 52 Times in 52 Posts iTrader Rating: (11/100% )	T3 turbo on my 5s-fe hi guys. i have a t3 turbo as you know im trying to cleect everything to make my 5s-fe a 5sfte. I want to know if i will have to cut and weld the flange when i guy the 3sgte manifold so i can bolt on the t3 turbo. would it just fit up or no? what about the downpipe?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-28-2009, 03:12 PM	#2 (permalink)
Redstar My other cars are jealous Join Date: Feb 2007 Location: Bellingham, WA Posts: 439 Thanks: 21 Thanked 40 Times in 29 Posts iTrader Rating: (12/100% )	You will need an adapter. I'll help you hone your Google-Fu. Google "ct26 to t3" like this: Your search results! and you should come up with a number of viable options for adapting your T3 turbo to the stock Toyota turbo manifold. Most turbo familes have specific exhaust and downpipe flanges. Manifolds and downpipes designed for the stock toyota turbo (CT26) will not bolt onto a T3 based turbo. Discalimer: I'm bored and having a long day, please don't take the link I posted the wrong way.

05-28-2009, 03:19 PM	#3 (permalink)
fvillota Did you just press that? Join Date: Feb 2008 Location: Miami Posts: 2,539 Thanks: 73 Thanked 52 Times in 52 Posts iTrader Rating: (11/100% )	so i will have to make my own t3 custon downpipe?

05-28-2009, 04:04 PM	#4 (permalink)
Redstar My other cars are jealous Join Date: Feb 2007 Location: Bellingham, WA Posts: 439 Thanks: 21 Thanked 40 Times in 29 Posts iTrader Rating: (12/100% )	Don't know. It will likely depend on what T3 turbo you have. The T3 is probably the most common turbo out there so there are dozens of varieties. However, there are MR2 specific downpipes for T3/T4's. Maybe contact one of the vendors on this board to see if they make a downpipe that will fit your turbo.

05-28-2009, 06:42 PM	#5 (permalink)
fvillota Did you just press that? Join Date: Feb 2008 Location: Miami Posts: 2,539 Thanks: 73 Thanked 52 Times in 52 Posts iTrader Rating: (11/100% )	ok thanks alot for all ur help! i'll look more into this.

05-28-2009, 07:00 PM	#6 (permalink)
SW21T 400HP 3rd gen?? Join Date: Nov 2008 Location: Washington St Posts: 1,853 Thanks: 143 Thanked 32 Times in 30 Posts iTrader Rating: (18/100% )	you might have to, I have to for mine, I have the t3 t4 turbo

05-28-2009, 10:06 PM	#7 (permalink)
fvillota Did you just press that? Join Date: Feb 2008 Location: Miami Posts: 2,539 Thanks: 73 Thanked 52 Times in 52 Posts iTrader Rating: (11/100% )	what about the adapters from a ct to a t3 with a waste gate port? would everything still fit the right way?

05-28-2009, 10:09 PM	#8 (permalink)
SW21T 400HP 3rd gen?? Join Date: Nov 2008 Location: Washington St Posts: 1,853 Thanks: 143 Thanked 32 Times in 30 Posts iTrader Rating: (18/100% )	It should but why don't you cut and weld flanges that way you got the t3 flange with no adapters

05-28-2009, 10:11 PM	#9 (permalink)
fvillota Did you just press that? Join Date: Feb 2008 Location: Miami Posts: 2,539 Thanks: 73 Thanked 52 Times in 52 Posts iTrader Rating: (11/100% )	because i cant seem to find a welder i like. lol

05-28-2009, 10:20 PM	#10 (permalink)
SW21T 400HP 3rd gen?? Join Date: Nov 2008 Location: Washington St Posts: 1,853 Thanks: 143 Thanked 32 Times in 30 Posts iTrader Rating: (18/100% )	Oh LOL I got a buddy to weld all my stuff at his work, turned out nice especially when he made the wastegated adapter to my turbo manifold, Looked like if it came with one

05-28-2009, 10:37 PM	#11 (permalink)
fvillota Did you just press that? Join Date: Feb 2008 Location: Miami Posts: 2,539 Thanks: 73 Thanked 52 Times in 52 Posts iTrader Rating: (11/100% )	lol yea thats my problem. i have no one.

05-28-2009, 10:43 PM	#12 (permalink)
SW21T 400HP 3rd gen?? Join Date: Nov 2008 Location: Washington St Posts: 1,853 Thanks: 143 Thanked 32 Times in 30 Posts iTrader Rating: (18/100% )	you don't have local welding shops?

05-28-2009, 10:47 PM	#13 (permalink)
killermillermr2 Honda Hunter Join Date: Dec 2007 Location: Colorado Posts: 864 Thanks: 25 Thanked 28 Times in 28 Posts iTrader Rating: (10/100% )	too bad your not close to CO. id do it for ya.

05-28-2009, 11:03 PM	#17 (permalink)
fvillota Did you just press that? Join Date: Feb 2008 Location: Miami Posts: 2,539 Thanks: 73 Thanked 52 Times in 52 Posts iTrader Rating: (11/100% )	yea i know. i have to look into that. for now i just want to get all the knowledge i can get so i wont run into problems. and collect everything at the same time. was the msd hard to wire?

05-28-2009, 11:05 PM	#18 (permalink)
SW21T 400HP 3rd gen?? Join Date: Nov 2008 Location: Washington St Posts: 1,853 Thanks: 143 Thanked 32 Times in 30 Posts iTrader Rating: (18/100% )	Haven't wired mine yet. ask killer, he got his done

05-29-2009, 01:02 AM	#20 (permalink)
killermillermr2 Honda Hunter Join Date: Dec 2007 Location: Colorado Posts: 864 Thanks: 25 Thanked 28 Times in 28 Posts iTrader Rating: (10/100% )	Take alook at this:http://www.mr2.com/forums/efi-corner...tall-help.html