tail light

dcizan570 · 05-31-2009, 10:49 PM

i just got a 92 non T mr2 and the tail light is out..can anyone explain how to take a tail light out i found one screw but the whole t light didnt come out?

tstoney82 · 05-31-2009, 10:58 PM

remove the center peice between the two tails (the one with the mr2 logo on it) and then you should be able to easily remove the tails. from there its pretty simple. just remove the old bulb, put in the new one, and reverse the process.

dcizan570 · 05-31-2009, 11:00 PM

to remove the center piece is it just screws?

tstoney82 · 05-31-2009, 11:03 PM

pretty much. if im not mistaken its only screws then you pop it off.

dcizan570 · 05-31-2009, 11:05 PM

okay ill try that out tomorrow

Ben · 05-31-2009, 11:18 PM

This is how to do it: MR2 Taillight Modification

tstoney82 · 05-31-2009, 11:22 PM

Quote:

Originally Posted by Ben

This is how to do it: MR2 Taillight Modification

link isnt working ben. send another one.

Maruki-kun · 06-01-2009, 12:56 AM

you need to pop off the corner lights on the sides, the little triangles, you want to pry then off from back to front of the car. then there are 2 screws behind it, the the one that screws in near the center panel.

05-31-2009, 10:49 PM	#1 (permalink)
dcizan570 Some Skills Join Date: May 2009 Posts: 54 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	tail light i just got a 92 non T mr2 and the tail light is out..can anyone explain how to take a tail light out i found one screw but the whole t light didnt come out?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-31-2009, 10:58 PM	#2 (permalink)
tstoney82 one hitter quiter.... Join Date: May 2009 Location: clayton nc Posts: 638 Thanks: 16 Thanked 18 Times in 16 Posts iTrader Rating: (4/100% )	remove the center peice between the two tails (the one with the mr2 logo on it) and then you should be able to easily remove the tails. from there its pretty simple. just remove the old bulb, put in the new one, and reverse the process.

05-31-2009, 11:00 PM	#3 (permalink)
dcizan570 Some Skills Join Date: May 2009 Posts: 54 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	to remove the center piece is it just screws?

05-31-2009, 11:03 PM	#4 (permalink)
tstoney82 one hitter quiter.... Join Date: May 2009 Location: clayton nc Posts: 638 Thanks: 16 Thanked 18 Times in 16 Posts iTrader Rating: (4/100% )	pretty much. if im not mistaken its only screws then you pop it off.

05-31-2009, 11:05 PM	#5 (permalink)
dcizan570 Some Skills Join Date: May 2009 Posts: 54 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	okay ill try that out tomorrow

05-31-2009, 11:18 PM	#6 (permalink)
Ben Same In The End Join Date: Aug 2006 Location: Oceanside, CA / Reno, NV Posts: 4,274 Thanks: 20 Thanked 309 Times in 284 Posts My Google Map iTrader Rating: (16/100% )	This is how to do it: MR2 Taillight Modification

06-01-2009, 12:56 AM	#8 (permalink)
Maruki-kun Cage Fighter Join Date: Mar 2008 Location: Millington, MD Posts: 2,487 Thanks: 9 Thanked 74 Times in 67 Posts My Google Map iTrader Rating: (5/100% )	you need to pop off the corner lights on the sides, the little triangles, you want to pry then off from back to front of the car. then there are 2 screws behind it, the the one that screws in near the center panel.