my 5sfte project - Page 3

MR2enV · 07-28-2009, 12:18 PM

You see how the vacum line runs from the turbo to the wastgate and the wastgate has another nipple coming off of it,,, block it off.... Okay im assuming your talking about the silver lines that originate from the middle of the actaul turbo, and they are right next to eachother.. these are the coolant lines... one is a feeder and one is a return

tstoney82 · 07-28-2009, 01:38 PM

those two silver ones are the ones i was talking about. i was thinking they were either oil or coolant lines. where did you guys tap these lines into.

killermillermr2 · 07-28-2009, 02:45 PM

If your car is 91-92 there should be plug bolts in the water goosenecks. I drilled and tapped these to 1/4 NPT and screwed in a 3/8 hose barb in each one. Guys also T into the lines under the throttle body.

Edit: see post 59 for better pics

Medusa · 07-28-2009, 04:26 PM

Killermiller, what's your approximate total cost and time spent on the 5S-FTE project so far?

Levi · 07-28-2009, 04:37 PM

I would also like to know how much money you wasted when you pop your motor.

SW21T · 07-28-2009, 07:48 PM

Quote:

Originally Posted by Medusa

Killermiller, what's your approximate total cost and time spent on the 5S-FTE project so far?

Since I did it too, I spent 2500, and thats my guess for killer

tstoney82 · 07-28-2009, 08:00 PM

i've got about $900 in mine so far. but thats the kit, manifold, exhaust, and dp. i still got some things i need to get. but i think i will be somewhere in the 1500 range.

killermillermr2 · 07-28-2009, 09:23 PM

Quote:

Originally Posted by Levi

I would also like to know how much money you wasted when you pop your motor.

If it poped tommorow I would not concider it a waste. I have already put over 1k miles on it and she still lives. I did this for the experiance, not to just throw in another engine. I found it more of a challenge to make the boosted 5s than to just swap.

I have lost all track of time spent on this(it is alot and I like to tinker)
out of pocket is around $1600. I have some nice upgrades to the basic setup to.

Medusa · 07-28-2009, 09:30 PM

Thanks killermiller, that's good to know. I know what you mean about the tinkering, I am the same way. I will literally spend hours, when I have the free time, by starting to do something simple and then meander off track and start fiddling with other little things, just having fun.

killermillermr2 · 07-28-2009, 09:32 PM

Yeah, thats what I do too. I'll go to check the oil, next thing I know its 3 in the morning and half my engine is out of the car.

Medusa · 07-28-2009, 09:35 PM

Haha the only reason that hasn't happened to me is that I don't have all the tools to do that...yet. I live in an apartment complex, so no garage or anything for me. But, I am going to college to be a mechanic, so I have access to a FULLY stocked garage. They have every kind of tool and machine I can think of, and then some besides.

killermillermr2 · 07-28-2009, 09:39 PM

You know what they say: "Whoever dies with the most tools wins!"

(my wife hates when I say that, because I had just spent alot of money and thats how I justify it

)

Medusa · 07-28-2009, 09:43 PM

Haha no wife here, I'm 18 and single! I can spend all the money I want (well, all my extra money after bills and such..

) on my car. And I don't want to have to deal with a girlfriend during my first year of college, which I will be starting next month. I'll just have fun with whoever I want.

tstoney82 · 07-29-2009, 02:15 PM

i feel you on the spending money on tools. i tell my wife that its a necessary evil. she gets pissed, but when i explain that i can write it off on taxes she gets all excited because she spends our tax refund every year. i think ive spent about $7000 so far this year on tools and im not done yet. but anyways.....does anyone have any suggestions on the blow-off valve lines and where they might be going?

killermillermr2 · 07-29-2009, 03:11 PM

What kind of BOV are you using? There are spare ports on the back of the intake mannifold that are capped off(passenger side just in front of the trunk fire wall). these work great for BOV, boost gauge, BTM, or any other added vaccum lines.

tstoney82 · 07-29-2009, 03:21 PM

its the stock BOV. thanks for the info. im gonna go hook those up real quick. im waiting on my battery to charge for my cordless drill so i can run the coolant lines tonight. does it matter which one of those silver lines is the return and which one is the feed? if so give me some hints. im thinking the bent one is the return, but i could have that wrong.

tstoney82 · 07-29-2009, 04:11 PM

could i run the boost guage off one of the wastegate vacuum lines?

killermillermr2 · 07-29-2009, 04:37 PM

Quote:

Originally Posted by tstoney82

could i run the boost guage off one of the wastegate vacuum lines?

That would be fine to T into. I will go check what I did on the feed/return of the water. just a minute

killermillermr2 · 07-29-2009, 04:50 PM

Here is what I did. The one hose goes around back of the heat shield. had to cut a small bit out of the gaurd to let the hose come through. then small hunks of hose to protect the coolant line. If these pics are hard to understand let me know.

jinraiden · 07-29-2009, 05:12 PM

What kind of downpipe are you all using?

How hot does your engine bay get, killer? I could turn my engine lid into a George Foreman grill if I wanted.

07-28-2009, 02:45 PM	#43 (permalink)
killermillermr2 Honda Hunter Join Date: Dec 2007 Location: Colorado Posts: 864 Thanks: 25 Thanked 28 Times in 28 Posts iTrader Rating: (10/100% )	If your car is 91-92 there should be plug bolts in the water goosenecks. I drilled and tapped these to 1/4 NPT and screwed in a 3/8 hose barb in each one. Guys also T into the lines under the throttle body. Edit: see post 59 for better pics Last edited by killermillermr2; 07-29-2009 at 04:53 PM..

07-28-2009, 09:39 PM	#52 (permalink)
killermillermr2 Honda Hunter Join Date: Dec 2007 Location: Colorado Posts: 864 Thanks: 25 Thanked 28 Times in 28 Posts iTrader Rating: (10/100% )	You know what they say: "Whoever dies with the most tools wins!" (my wife hates when I say that, because I had just spent alot of money and thats how I justify it)

07-28-2009, 09:43 PM	#53 (permalink)
Medusa HAY GUISE! Join Date: Sep 2008 Location: Reno, NV Posts: 752 Thanks: 9 Thanked 18 Times in 17 Posts iTrader Rating: (0/0% )	Haha no wife here, I'm 18 and single! I can spend all the money I want (well, all my extra money after bills and such..) on my car. And I don't want to have to deal with a girlfriend during my first year of college, which I will be starting next month. I'll just have fun with whoever I want.

07-29-2009, 04:50 PM	#59 (permalink)
killermillermr2 Honda Hunter Join Date: Dec 2007 Location: Colorado Posts: 864 Thanks: 25 Thanked 28 Times in 28 Posts iTrader Rating: (10/100% )	Here is what I did. The one hose goes around back of the heat shield. had to cut a small bit out of the gaurd to let the hose come through. then small hunks of hose to protect the coolant line. If these pics are hard to understand let me know. Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-28-2009, 12:18 PM	#41 (permalink)
MR2enV 21.1 Gigawatts Join Date: Mar 2007 Location: Miramar, Florida Posts: 1,068 Thanks: 0 Thanked 10 Times in 10 Posts iTrader Rating: (4/75% )	You see how the vacum line runs from the turbo to the wastgate and the wastgate has another nipple coming off of it,,, block it off.... Okay im assuming your talking about the silver lines that originate from the middle of the actaul turbo, and they are right next to eachother.. these are the coolant lines... one is a feeder and one is a return

07-28-2009, 01:38 PM	#42 (permalink)
tstoney82 one hitter quiter.... Join Date: May 2009 Location: clayton nc Posts: 638 Thanks: 16 Thanked 18 Times in 16 Posts iTrader Rating: (4/100% )	those two silver ones are the ones i was talking about. i was thinking they were either oil or coolant lines. where did you guys tap these lines into.

07-28-2009, 04:26 PM	#44 (permalink)
Medusa HAY GUISE! Join Date: Sep 2008 Location: Reno, NV Posts: 752 Thanks: 9 Thanked 18 Times in 17 Posts iTrader Rating: (0/0% )	Killermiller, what's your approximate total cost and time spent on the 5S-FTE project so far?

07-28-2009, 04:37 PM	#45 (permalink)
Levi Cage Fighter Join Date: Jul 2007 Posts: 225 Thanks: 4 Thanked 15 Times in 9 Posts iTrader Rating: (1/100% )	I would also like to know how much money you wasted when you pop your motor.

07-28-2009, 08:00 PM	#47 (permalink)
tstoney82 one hitter quiter.... Join Date: May 2009 Location: clayton nc Posts: 638 Thanks: 16 Thanked 18 Times in 16 Posts iTrader Rating: (4/100% )	i've got about $900 in mine so far. but thats the kit, manifold, exhaust, and dp. i still got some things i need to get. but i think i will be somewhere in the 1500 range.

07-28-2009, 09:30 PM	#49 (permalink)
Medusa HAY GUISE! Join Date: Sep 2008 Location: Reno, NV Posts: 752 Thanks: 9 Thanked 18 Times in 17 Posts iTrader Rating: (0/0% )	Thanks killermiller, that's good to know. I know what you mean about the tinkering, I am the same way. I will literally spend hours, when I have the free time, by starting to do something simple and then meander off track and start fiddling with other little things, just having fun.

07-28-2009, 09:32 PM	#50 (permalink)
killermillermr2 Honda Hunter Join Date: Dec 2007 Location: Colorado Posts: 864 Thanks: 25 Thanked 28 Times in 28 Posts iTrader Rating: (10/100% )	Yeah, thats what I do too. I'll go to check the oil, next thing I know its 3 in the morning and half my engine is out of the car.

07-28-2009, 09:35 PM	#51 (permalink)
Medusa HAY GUISE! Join Date: Sep 2008 Location: Reno, NV Posts: 752 Thanks: 9 Thanked 18 Times in 17 Posts iTrader Rating: (0/0% )	Haha the only reason that hasn't happened to me is that I don't have all the tools to do that...yet. I live in an apartment complex, so no garage or anything for me. But, I am going to college to be a mechanic, so I have access to a FULLY stocked garage. They have every kind of tool and machine I can think of, and then some besides.

07-29-2009, 02:15 PM	#54 (permalink)
tstoney82 one hitter quiter.... Join Date: May 2009 Location: clayton nc Posts: 638 Thanks: 16 Thanked 18 Times in 16 Posts iTrader Rating: (4/100% )	i feel you on the spending money on tools. i tell my wife that its a necessary evil. she gets pissed, but when i explain that i can write it off on taxes she gets all excited because she spends our tax refund every year. i think ive spent about $7000 so far this year on tools and im not done yet. but anyways.....does anyone have any suggestions on the blow-off valve lines and where they might be going?

07-29-2009, 03:11 PM	#55 (permalink)
killermillermr2 Honda Hunter Join Date: Dec 2007 Location: Colorado Posts: 864 Thanks: 25 Thanked 28 Times in 28 Posts iTrader Rating: (10/100% )	What kind of BOV are you using? There are spare ports on the back of the intake mannifold that are capped off(passenger side just in front of the trunk fire wall). these work great for BOV, boost gauge, BTM, or any other added vaccum lines.

07-29-2009, 03:21 PM	#56 (permalink)
tstoney82 one hitter quiter.... Join Date: May 2009 Location: clayton nc Posts: 638 Thanks: 16 Thanked 18 Times in 16 Posts iTrader Rating: (4/100% )	its the stock BOV. thanks for the info. im gonna go hook those up real quick. im waiting on my battery to charge for my cordless drill so i can run the coolant lines tonight. does it matter which one of those silver lines is the return and which one is the feed? if so give me some hints. im thinking the bent one is the return, but i could have that wrong.

07-29-2009, 04:11 PM	#57 (permalink)
tstoney82 one hitter quiter.... Join Date: May 2009 Location: clayton nc Posts: 638 Thanks: 16 Thanked 18 Times in 16 Posts iTrader Rating: (4/100% )	could i run the boost guage off one of the wastegate vacuum lines?

07-29-2009, 05:12 PM	#60 (permalink)
jinraiden No Skills Join Date: Jul 2006 Location: Previously/Nor Cal Currently/Eastern Shore, MD Posts: 133 Thanks: 5 Thanked 5 Times in 5 Posts iTrader Rating: (1/100% )	What kind of downpipe are you all using? How hot does your engine bay get, killer? I could turn my engine lid into a George Foreman grill if I wanted.