![]() |
|
|
|
#1 (permalink) |
|
No Skills
Join Date: Dec 2008
Location: Austin, TX
Posts: 14
Thanks: 0
Thanked 0 Times in 0 Posts
iTrader Rating: (0/0% ) |
NA to turbo
I have been searching around the site and have found plenty of posts about v6 swaps, 3sge swaps etc...
I have an NA sw20, and would like to swap to a 3sgte. I cant imagine this will be too complicated as this motor was offered in the car, but I need to know what all will be involved before I get in too deep. What will I need besides the motor itself, transmission, and ecu? Will the turbo ecu plug right into the existing harness? Some fuel system upgrades will probably be called for, but thats something I plan on upgrading anyway... From my experience its never as easy as it sounds in my head, what am i forgetting to think of? ![]() |
|
|
|
|
|
#2 (permalink) |
|
No Skills
Join Date: Dec 2008
Location: Austin, TX
Posts: 14
Thanks: 0
Thanked 0 Times in 0 Posts
iTrader Rating: (0/0% ) |
also, is there a shop that sells pre spliced harnesses for this swap?
|
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|