throwing codes need help.

mk1matt · 08-29-2006, 11:23 PM

Ok I just did my timing and found out I was about 5 degrees off. Also when I put in the wire to terminals te1 and e1 to set the timing I noticed that I was getting a code. the code read 2,4,5,1. Dose anyone know what these codes mean? my car also has a poor acceleration/hesitation problem.

mr2greasemonkey · 08-30-2006, 12:26 AM

Hey Matt, codes: 24-intake air temp sensor open/short, 51-switch condition signal ( a/c switch, tps idle circuit, park/neutral switch )

mk1matt · 08-30-2006, 04:15 AM

thanks zai, I knew that plug next to the stupid intake had to go to something.

08-29-2006, 11:23 PM	#1 (permalink)
mk1matt mr2 misfortunate Join Date: Feb 2006 Location: clackamas, OR Posts: 172 Thanks: 3 Thanked 2 Times in 2 Posts My Google Map iTrader Rating: (0/0% )	throwing codes need help. Ok I just did my timing and found out I was about 5 degrees off. Also when I put in the wire to terminals te1 and e1 to set the timing I noticed that I was getting a code. the code read 2,4,5,1. Dose anyone know what these codes mean? my car also has a poor acceleration/hesitation problem.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-30-2006, 12:26 AM	#2 (permalink)
mr2greasemonkey Once again....yups Join Date: Sep 2005 Location: Portland, OR Posts: 1,658 Thanks: 4 Thanked 63 Times in 42 Posts iTrader Rating: (0/0% )	Hey Matt, codes: 24-intake air temp sensor open/short, 51-switch condition signal ( a/c switch, tps idle circuit, park/neutral switch )

08-30-2006, 04:15 AM	#3 (permalink)
mk1matt mr2 misfortunate Join Date: Feb 2006 Location: clackamas, OR Posts: 172 Thanks: 3 Thanked 2 Times in 2 Posts My Google Map iTrader Rating: (0/0% )	thanks zai, I knew that plug next to the stupid intake had to go to something.