Beams Wire Harness Part Number?

PHOENIX · 02-05-2007, 08:04 PM

Anyone got the Beams Wire Harness Part Number?

fern · 02-06-2007, 01:47 AM

i think this is it but not sure haven't been able to find it at any dealer in Canada

82111-17195 9712-9908 WIRE, ENGINE ROOM MAIN SW20..5F..G

PHOENIX · 02-06-2007, 02:03 AM

I will double check that number when i get home, thanks!

fern · 02-13-2007, 12:10 AM

so did you see find out if thats the right part #?

PHOENIX · 02-13-2007, 06:02 AM

yes, that is the correct part number according to my EPD, thanks again!

P.S. i will have a price for you guys, new, from toyota tomorrow

fern · 02-13-2007, 08:30 PM

cool pm when you get the price

Quote:

Originally Posted by PHOENIX

yes, that is the correct part number according to my EPD, thanks again!

P.S. i will have a price for you guys, new, from toyota tomorrow

PHOENIX · 02-13-2007, 09:00 PM

The price that Toyota Japan quoted me for the Beams Engine Wiring Harness is....

Y59700

Roughly....

$492.00 give or take $5 bucks depending on the days exchange rate.

tdk95 · 07-11-2008, 07:35 PM

HELLO

82111-17195 body harness beams no engine harness

82121-17256 engine harness beams mr2 5 f

Protok · 07-13-2008, 05:57 PM

I take it the harness would be a direct swap for the current one and make the engine work without pissing about.

MANDALAY · 07-13-2008, 09:27 PM

^ Nah not really still need to wire the fuel pump,taco,speedo and air conditioner wires in and out to the amplifier

Protok · 07-14-2008, 05:18 PM

Damn, this beams keep coming up with more troubles doesnt it?

MANDALAY · 07-14-2008, 06:13 PM

No your reading it the wrong way. Harnesses slightly change as the version changes.
The float in the sump was delited by Toyota in their last model due to errors and costly for Toyota to replaxe,
The beams harness was simplified by having all the wires l mentioned above to end at the kick panel. Whereas the earilier models branch of at the rear quarter then go down the center consol. So you can either splice in or just get the dash wiring loom. Easy you just have to identify the wires. Seek someone who has done it or a capable motor electrician. I found an old pro and he did it in 2 hrs, $70.

Servin · 07-14-2008, 06:23 PM

Protok i know that here in the US we have a member on the East Cost that does a conversion harness. You could probably get one from him since he is on the east coast shipping shouldnt be that bad.

mr220v · 07-16-2008, 11:02 AM

^You're talking about me right?

Servin · 07-16-2008, 05:50 PM

Quote:

Originally Posted by mr220v

^You're talking about me right?

Yup! Unless you have a twin running around that also happens to have a BEAMS?

puretone · 07-19-2008, 08:35 PM

Dr. Tweak Garage? Phoenix Tuning, i think he's in Vermont no?

02-05-2007, 08:04 PM	#1 (permalink)
PHOENIX Beams Owners Group Join Date: Mar 2005 Location: On Hiatus....... Posts: 9,266 Thanks: 92 Thanked 292 Times in 224 Posts Blog Entries: 1 My Google Map iTrader Rating: (49/100% )	Beams Wire Harness Part Number? Anyone got the Beams Wire Harness Part Number? __________________ - Dave I'm moving so I need to downsize my collection/hoarding of MR2 Parts. Check out the for sale section to see what I have available!

07-14-2008, 06:13 PM	#12 (permalink)
MANDALAY Beams Owners Group Join Date: Feb 2007 Location: victoria AUSTRALIA Posts: 4,201 Thanks: 136 Thanked 112 Times in 107 Posts My Google Map iTrader Rating: (6/100% )	No your reading it the wrong way. Harnesses slightly change as the version changes. The float in the sump was delited by Toyota in their last model due to errors and costly for Toyota to replaxe, The beams harness was simplified by having all the wires l mentioned above to end at the kick panel. Whereas the earilier models branch of at the rear quarter then go down the center consol. So you can either splice in or just get the dash wiring loom. Easy you just have to identify the wires. Seek someone who has done it or a capable motor electrician. I found an old pro and he did it in 2 hrs, $70. Last edited by MANDALAY; 07-16-2008 at 08:59 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-06-2007, 01:47 AM	#2 (permalink)
fern No Skills Join Date: Oct 2006 Location: Canada ,British Columbia Posts: 91 Thanks: 0 Thanked 0 Times in 0 Posts My Google Map iTrader Rating: (0/0% )	i think this is it but not sure haven't been able to find it at any dealer in Canada 82111-17195 9712-9908 WIRE, ENGINE ROOM MAIN SW20..5F..G

02-06-2007, 02:03 AM	#3 (permalink)
PHOENIX Beams Owners Group Join Date: Mar 2005 Location: On Hiatus....... Posts: 9,266 Thanks: 92 Thanked 292 Times in 224 Posts Blog Entries: 1 My Google Map iTrader Rating: (49/100% )	I will double check that number when i get home, thanks!

02-13-2007, 12:10 AM	#4 (permalink)
fern No Skills Join Date: Oct 2006 Location: Canada ,British Columbia Posts: 91 Thanks: 0 Thanked 0 Times in 0 Posts My Google Map iTrader Rating: (0/0% )	so did you see find out if thats the right part #?

02-13-2007, 06:02 AM	#5 (permalink)
PHOENIX Beams Owners Group Join Date: Mar 2005 Location: On Hiatus....... Posts: 9,266 Thanks: 92 Thanked 292 Times in 224 Posts Blog Entries: 1 My Google Map iTrader Rating: (49/100% )	yes, that is the correct part number according to my EPD, thanks again! P.S. i will have a price for you guys, new, from toyota tomorrow

02-13-2007, 09:00 PM	#7 (permalink)
PHOENIX Beams Owners Group Join Date: Mar 2005 Location: On Hiatus....... Posts: 9,266 Thanks: 92 Thanked 292 Times in 224 Posts Blog Entries: 1 My Google Map iTrader Rating: (49/100% )	The price that Toyota Japan quoted me for the Beams Engine Wiring Harness is.... Y59700 Roughly.... $492.00 give or take $5 bucks depending on the days exchange rate.

07-11-2008, 07:35 PM	#8 (permalink)
tdk95 Beams Owners Group Join Date: Jul 2008 Posts: 11 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	HELLO 82111-17195 body harness beams no engine harness 82121-17256 engine harness beams mr2 5 f

07-13-2008, 05:57 PM	#9 (permalink)
Protok Beams Owners Group Join Date: Sep 2007 Location: England, UK Posts: 455 Thanks: 15 Thanked 11 Times in 11 Posts My Google Map iTrader Rating: (1/100% )	I take it the harness would be a direct swap for the current one and make the engine work without pissing about.

07-13-2008, 09:27 PM	#10 (permalink)
MANDALAY Beams Owners Group Join Date: Feb 2007 Location: victoria AUSTRALIA Posts: 4,201 Thanks: 136 Thanked 112 Times in 107 Posts My Google Map iTrader Rating: (6/100% )	^ Nah not really still need to wire the fuel pump,taco,speedo and air conditioner wires in and out to the amplifier

07-14-2008, 05:18 PM	#11 (permalink)
Protok Beams Owners Group Join Date: Sep 2007 Location: England, UK Posts: 455 Thanks: 15 Thanked 11 Times in 11 Posts My Google Map iTrader Rating: (1/100% )	Damn, this beams keep coming up with more troubles doesnt it?

07-14-2008, 06:23 PM	#13 (permalink)
Servin Beams Owners Group Join Date: Aug 2007 Location: DFW, Texas Posts: 1,250 Thanks: 13 Thanked 54 Times in 42 Posts iTrader Rating: (2/100% )	Protok i know that here in the US we have a member on the East Cost that does a conversion harness. You could probably get one from him since he is on the east coast shipping shouldnt be that bad.

07-16-2008, 11:02 AM	#14 (permalink)
mr220v Beams Owners Group Join Date: Mar 2006 Posts: 2,527 Thanks: 13 Thanked 176 Times in 147 Posts iTrader Rating: (11/100% )	^You're talking about me right?

07-19-2008, 08:35 PM	#16 (permalink)
puretone Beams Owners Group Join Date: Aug 2006 Location: Aruba, #1 BEAMS Engine on the Island Posts: 2,338 Thanks: 28 Thanked 57 Times in 56 Posts My Google Map iTrader Rating: (1/100% )	Dr. Tweak Garage? Phoenix Tuning, i think he's in Vermont no?