Beams Part Number Master List - Page 2

Ashmen · 10-15-2009, 09:45 PM

I was informed that a Gen3 oil pump isn't the same as the Beams. Could I get a verification?

MANDALAY · 10-16-2009, 12:50 AM

Correct it isnt

NCMR2 · 01-21-2010, 06:39 PM

What dealerships if any in the US can order this stuff? I just got off the phone with Lithia and they could not order this stuff apparently.

MANDALAY · 01-22-2010, 09:24 AM

No dealerships that im aware of.

te51levin · 01-24-2010, 11:29 AM

Quote:

Originally Posted by NCMR2

What dealerships if any in the US can order this stuff? I just got off the phone with Lithia and they could not order this stuff apparently.

If we can't buy it direct from Toyota, no other dealership can, either. Those that do carry these parts have to get them through a third party, not direct from Toyota.

Josh at CRW (aka mister3) does stock a number of BEAMS parts, including the oil pump. I have been sending people to him for the parts that we cannot buy from Toyota.

2muchfun · 02-01-2010, 04:05 PM

beams temp sensor p/n please.

P@shencia · 02-01-2010, 05:12 PM

Quote:

Originally Posted by 2muchfun

beams temp sensor p/n please.

I think you speak about water temp sensor
on redtop two sensors
first 89422-22030
second 89422-16010

2muchfun · 02-01-2010, 07:01 PM

I only know of one. It is installed on the front side of the water neck and has a three wire plug. The sensor on the Beams feeds the ecu and cluster at the same time (3 wires).

Brad.

MANDALAY · 02-02-2010, 02:40 AM

Quote:

Originally Posted by P@shencia

I think you speak about water temp sensor
on redtop two sensors
first 89422-22030
second 89422-16010

there is only one the
89422-22030 is it .The other one is a denso unit which is only 2 wires as there was another probe for the gauge.
The correct one has 3 wires , for EFI and gauge

MANDALAY · 02-02-2010, 02:42 AM

Quote:

Originally Posted by 2muchfun

I only know of one. It is installed on the front side of the water neck and has a three wire plug. The sensor on the Beams feeds the ecu and cluster at the same time (3 wires).

Brad.

correct

Adex · 02-03-2010, 10:20 AM

Power-steering oil pressure switch part no. 89438-33010
This part is Celica specific.

njccmd2002 · 02-12-2010, 05:04 PM

need

Intake Gasket (2een engine and red pretty intake)

Exhaust gasket (2een engine and manifold)

the b-pipe gasket i know is 90917‑06075

P@shencia · 02-12-2010, 07:28 PM

Quote:

Originally Posted by njccmd2002

need

Intake Gasket (2een engine and red pretty intake)

Exhaust gasket (2een engine and manifold)

the b-pipe gasket i know is 90917‑06075

Intake gasket 17177-88560
Exhaust gasket 17173-88560

PCx188 · 03-05-2010, 01:34 AM

what is the part number for a BEAMS A/T ECU?

also, the part number the gear shift with the manual/power buttons?

P@shencia · 03-06-2010, 06:41 AM

Quote:

Originally Posted by PCx188

what is the part number for a BEAMS A/T ECU?

also, the part number the gear shift with the manual/power buttons?

3S-GE Beams A/T ECU
89661-17570 12/1997 - 02/1998
89661-17571 02/1998 - 08/1999
it's for Redtop Mr2 engine

kermitpower · 05-07-2010, 11:10 AM

I need the part number airhose (from the intakemanifold to the aircleaner) for a mr2 beams.

grt kermitpower

MANDALAY · 05-07-2010, 11:17 AM

17881-7A020
THATS THE S BEND RUBBER

Master Ash · 05-13-2010, 12:48 PM

hey guys i need the part no for the beams redtop tensioner pulley

sugarfree · 05-13-2010, 10:30 PM

I requested that somewhere on this thread i believe.

runswithscissors · 06-21-2010, 07:04 AM

How about the oil filter. It sounds like everyone knows which one they're using.

13540-88480 should be the timing tensioner.

05-13-2010, 10:30 PM	#39 (permalink)
sugarfree Some Skills Join Date: May 2007 Posts: 63 Thanks: 12 Thanked 0 Times in 0 Posts iTrader Rating: (1/100% )	I requested that somewhere on this thread i believe. Last edited by sugarfree; 05-15-2010 at 06:13 PM.. Reason: incorrect info.

06-21-2010, 07:04 AM	#40 (permalink)
runswithscissors Beams Owners Group Join Date: Jun 2010 Posts: 32 Thanks: 1 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	How about the oil filter. It sounds like everyone knows which one they're using. 13540-88480 should be the timing tensioner. Last edited by runswithscissors; 06-21-2010 at 05:15 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-15-2009, 09:45 PM	#21 (permalink)
Ashmen Beams Owners Group Join Date: Sep 2008 Location: AL Posts: 381 Thanks: 10 Thanked 18 Times in 17 Posts iTrader Rating: (4/100% )	I was informed that a Gen3 oil pump isn't the same as the Beams. Could I get a verification?

10-16-2009, 12:50 AM	#22 (permalink)
MANDALAY Beams Owners Group Join Date: Feb 2007 Location: victoria AUSTRALIA Posts: 4,201 Thanks: 136 Thanked 112 Times in 107 Posts My Google Map iTrader Rating: (6/100% )	Correct it isnt

01-21-2010, 06:39 PM	#23 (permalink)
NCMR2 Beams Owners Group Join Date: Jan 2009 Posts: 170 Thanks: 1 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	What dealerships if any in the US can order this stuff? I just got off the phone with Lithia and they could not order this stuff apparently.

01-22-2010, 09:24 AM	#24 (permalink)
MANDALAY Beams Owners Group Join Date: Feb 2007 Location: victoria AUSTRALIA Posts: 4,201 Thanks: 136 Thanked 112 Times in 107 Posts My Google Map iTrader Rating: (6/100% )	No dealerships that im aware of.

02-01-2010, 04:05 PM	#26 (permalink)
2muchfun Beams Owners Group Join Date: Nov 2007 Location: Wake Forest, NC Posts: 79 Thanks: 7 Thanked 4 Times in 4 Posts iTrader Rating: (1/100% )	beams temp sensor p/n please.

02-01-2010, 07:01 PM	#28 (permalink)
2muchfun Beams Owners Group Join Date: Nov 2007 Location: Wake Forest, NC Posts: 79 Thanks: 7 Thanked 4 Times in 4 Posts iTrader Rating: (1/100% )	I only know of one. It is installed on the front side of the water neck and has a three wire plug. The sensor on the Beams feeds the ecu and cluster at the same time (3 wires). Brad.

02-03-2010, 10:20 AM	#31 (permalink)
Adex No Skills Join Date: Apr 2009 Posts: 13 Thanks: 1 Thanked 0 Times in 0 Posts iTrader Rating: (1/100% )	Power-steering oil pressure switch part no. 89438-33010 This part is Celica specific.

02-12-2010, 05:04 PM	#32 (permalink)
njccmd2002 Beams Owners Group Join Date: May 2008 Location: Jackson TN Posts: 154 Thanks: 12 Thanked 1 Time in 1 Post iTrader Rating: (1/100% )	need Intake Gasket (2een engine and red pretty intake) Exhaust gasket (2een engine and manifold) the b-pipe gasket i know is 90917‑06075

03-05-2010, 01:34 AM	#34 (permalink)
PCx188 PCFIVEZ Join Date: Jan 2006 Location: New York City Posts: 801 Thanks: 24 Thanked 4 Times in 4 Posts iTrader Rating: (7/100% )	what is the part number for a BEAMS A/T ECU? also, the part number the gear shift with the manual/power buttons?

05-07-2010, 11:10 AM	#36 (permalink)
kermitpower No Skills Join Date: Dec 2008 Location: Holland Posts: 30 Thanks: 2 Thanked 0 Times in 0 Posts iTrader Rating: (1/100% )	I need the part number airhose (from the intakemanifold to the aircleaner) for a mr2 beams. grt kermitpower

05-07-2010, 11:17 AM	#37 (permalink)
MANDALAY Beams Owners Group Join Date: Feb 2007 Location: victoria AUSTRALIA Posts: 4,201 Thanks: 136 Thanked 112 Times in 107 Posts My Google Map iTrader Rating: (6/100% )	17881-7A020 THATS THE S BEND RUBBER

05-13-2010, 12:48 PM	#38 (permalink)
Master Ash No Skills Join Date: Sep 2009 Posts: 46 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	hey guys i need the part no for the beams redtop tensioner pulley