3vz-fe & 5vz-fe-R1 Engine Mounts for sale

Weasy2k · 04-02-2007, 10:20 PM

Sea2Sky Tuning is now stocking and selling FourVeeSix 3vz-fe and 5vz-fe engine mounts!

Some info from Tony (FourVeeSix) about the mount
"I did a test on the standard Toyota v6 cast steel mounts to see how much the dog leg part could resist stress and it came out at 0.5 ton before it distorted and cracked. The same test on the prototyped version i did resisted 4 tons...with the present version withstanding 2.0 tons before it distorts."

So as you can see these mounts really can handle a lot of force!

Fitted to the 3vz-fe:

As for the 5vz-fe, it bolts up just fine but there is some gaps and minor cutting to fit both timing covers onto the mount decently.
Personally i do not run the top timing cover and i will modify the lower one to fit for the current 5vz-fe i have here or you can even trim the mount just a bit to fit (i can do this here if you would like for no charge).

This is what Rev 1 looks like on the 5vz-fe:

I am going to be working with Tony to produce a second revision to the 3vz-fe mount that will fit nicely onto the 5vz with the stock upper and lower timing covers. Should be about 1mth before we see the prototypes of that!
In the mean time the 3vz-fe/"Rev1" versions are for sale.

Current Pricing is as follows:
UPDATE PRICE CHANGE: July 24th
3vz-fe/5vz-feR1 - 160 plus shipping
Please note that the price will change depending on the exchange from UK to USA.

Stock on its way, arriving May 16-18.

If you would like one of these units please email or PM me with your address and ill send you a complete quote with shipping included.

Thanks everyone!

canadam · 04-02-2007, 10:23 PM

Those look great! Definately the best available option right now.

Enthalpy · 04-02-2007, 11:57 PM

Fantastic! The mount issue is now a bolt-on affair. Nice job, Johnny and Tony!

blackbob · 04-05-2007, 08:04 PM

Do you still have these I'm very interested and can you do anything about the axle issue ?

Weasy2k · 04-05-2007, 08:31 PM

Yes i will have the first batch in either late next week or the week after. Just waiting on tony to finish his batch. Fire me a PM or email to hold one for you. First come first serve on these bad boys

blackbob · 04-05-2007, 09:45 PM

Quote:

Originally Posted by Weasy2k

Yes i will have the first batch in either late next week or the week after. Just waiting on tony to finish his batch. Fire me a PM or email to hold one for you. First come first serve on these bad boys

I'll take one !

aler_ka · 04-06-2007, 12:25 PM

can anyone do the same on the 1mz mount .. or everyone is heading for 3vz?

Weasy2k · 04-09-2007, 07:16 PM

The 1mz mount is in the works....
Sorry if anyone sent me an email/pm in the last few days i have been away and have "2hours" until my outlook has finished receiving my email....damn spam!\

Ill make the mount list and let everyone know once this batch arrives!

mp5o · 04-15-2007, 12:03 AM

I'll take one asap! LMK when they're available.. mp5o@hotmail.com

Weasy2k · 06-14-2007, 11:54 AM

mounts in stock Jun 11th...sold out June 12th...ill be getting more in not long from now!

Redstar · 06-19-2007, 01:25 AM

I'm really interested in the 5vz-fe mount. When do you think you will have the new rev in stock?

Weasy2k · 06-19-2007, 10:29 AM

we were working on the mz mounts first and i should be sending out the 5vz fan bracket which he can use to mod the 3vz-fe mount to fit our engines (5vz) with timing covers. A Few weeks out yet...

thwam · 06-19-2007, 04:54 PM

Nice looking mount. Now get to work on an AC bracket for the 5VZ...=)

Spektrewing386 · 06-20-2007, 11:09 AM

i got dibs on the next available 3vz mount.

gsus · 06-20-2007, 11:28 AM

I found my mount sitting on my desk today!!!

Looks great! I'm a bit curios on as to what the purpose of the riveted down cover is for?

Weasy2k · 06-20-2007, 01:47 PM

Heheh I dont have a/c so its hard to get a design made up

More mounts should be on the way next week!

Gsus good to hear! They are pretty damn nice. The rivet plate is to go over the water pump. Instead of leaving it just a open hole the plate closes it. If you did not cut the hole then the mount would hit the water pump

Epic_Gamer · 06-22-2007, 10:25 AM

O ya babe.. this is going on my list.

Spektrewing386 · 07-06-2007, 05:26 PM

any updates on the status of the mounts?

04-02-2007, 10:20 PM	#1 (permalink)
Weasy2k 3.4L 10K RPM In the works Join Date: Mar 2005 Location: Vancouver, BC Posts: 8,928 Thanks: 34 Thanked 76 Times in 65 Posts iTrader Rating: (6/100% )	3vz-fe & 5vz-fe-R1 Engine Mounts for sale Sea2Sky Tuning is now stocking and selling FourVeeSix 3vz-fe and 5vz-fe engine mounts! Some info from Tony (FourVeeSix) about the mount "I did a test on the standard Toyota v6 cast steel mounts to see how much the dog leg part could resist stress and it came out at 0.5 ton before it distorted and cracked. The same test on the prototyped version i did resisted 4 tons...with the present version withstanding 2.0 tons before it distorts." So as you can see these mounts really can handle a lot of force! Fitted to the 3vz-fe: As for the 5vz-fe, it bolts up just fine but there is some gaps and minor cutting to fit both timing covers onto the mount decently. Personally i do not run the top timing cover and i will modify the lower one to fit for the current 5vz-fe i have here or you can even trim the mount just a bit to fit (i can do this here if you would like for no charge). This is what Rev 1 looks like on the 5vz-fe: I am going to be working with Tony to produce a second revision to the 3vz-fe mount that will fit nicely onto the 5vz with the stock upper and lower timing covers. Should be about 1mth before we see the prototypes of that! In the mean time the 3vz-fe/"Rev1" versions are for sale. Current Pricing is as follows: UPDATE PRICE CHANGE: July 24th 3vz-fe/5vz-feR1 - 160 plus shipping Please note that the price will change depending on the exchange from UK to USA. Stock on its way, arriving May 16-18. If you would like one of these units please email or PM me with your address and ill send you a complete quote with shipping included. Thanks everyone! __________________ -Johnny @ Sea2Sky Tuning - www.sea2skytuning.com V6 Motor mounts discontinued, until further notice. Founder of the V6 Engine Stand Club...Join Today! (Or perhaps you are one of those "cool" guys who wants to put his v6 in the car instead. )

04-02-2007, 10:23 PM	#2 (permalink)
canadam MidshipExpress Join Date: Feb 2005 Location: Beautiful British Columbia Posts: 9,150 Thanks: 108 Thanked 119 Times in 105 Posts My Google Map iTrader Rating: (28/100% )	Those look great! Definately the best available option right now. __________________

04-02-2007, 11:57 PM	#3 (permalink)
Enthalpy EMS Harmonizer Join Date: Jan 2006 Location: Denver, CO Posts: 1,209 Thanks: 8 Thanked 53 Times in 42 Posts My Google Map iTrader Rating: (2/100% )	Fantastic! The mount issue is now a bolt-on affair. Nice job, Johnny and Tony!

04-05-2007, 08:04 PM	#4 (permalink)
blackbob wiring....odds and ends Join Date: Dec 2006 Location: Stationed in Guam Posts: 757 Thanks: 61 Thanked 4 Times in 4 Posts iTrader Rating: (2/100% )	Do you still have these I'm very interested and can you do anything about the axle issue ?

04-05-2007, 08:31 PM	#5 (permalink)
Weasy2k 3.4L 10K RPM In the works Join Date: Mar 2005 Location: Vancouver, BC Posts: 8,928 Thanks: 34 Thanked 76 Times in 65 Posts iTrader Rating: (6/100% )	Yes i will have the first batch in either late next week or the week after. Just waiting on tony to finish his batch. Fire me a PM or email to hold one for you. First come first serve on these bad boys

04-06-2007, 12:25 PM	#7 (permalink)
aler_ka No Skills Join Date: Mar 2006 Location: hawaii Posts: 213 Thanks: 0 Thanked 3 Times in 3 Posts iTrader Rating: (0/0% )	can anyone do the same on the 1mz mount .. or everyone is heading for 3vz?

04-09-2007, 07:16 PM	#8 (permalink)
Weasy2k 3.4L 10K RPM In the works Join Date: Mar 2005 Location: Vancouver, BC Posts: 8,928 Thanks: 34 Thanked 76 Times in 65 Posts iTrader Rating: (6/100% )	The 1mz mount is in the works.... Sorry if anyone sent me an email/pm in the last few days i have been away and have "2hours" until my outlook has finished receiving my email....damn spam!\ Ill make the mount list and let everyone know once this batch arrives!

04-15-2007, 12:03 AM	#9 (permalink)
mp5o No Skills Join Date: Jan 2006 Posts: 38 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	I'll take one asap! LMK when they're available.. mp5o@hotmail.com

06-14-2007, 11:54 AM	#10 (permalink)
Weasy2k 3.4L 10K RPM In the works Join Date: Mar 2005 Location: Vancouver, BC Posts: 8,928 Thanks: 34 Thanked 76 Times in 65 Posts iTrader Rating: (6/100% )	mounts in stock Jun 11th...sold out June 12th...ill be getting more in not long from now!

06-19-2007, 01:25 AM	#11 (permalink)
Redstar My other cars are jealous Join Date: Feb 2007 Location: Bellingham, WA Posts: 109 Thanks: 8 Thanked 3 Times in 3 Posts iTrader Rating: (4/100% )	I'm really interested in the 5vz-fe mount. When do you think you will have the new rev in stock?

06-19-2007, 10:29 AM	#12 (permalink)
Weasy2k 3.4L 10K RPM In the works Join Date: Mar 2005 Location: Vancouver, BC Posts: 8,928 Thanks: 34 Thanked 76 Times in 65 Posts iTrader Rating: (6/100% )	we were working on the mz mounts first and i should be sending out the 5vz fan bracket which he can use to mod the 3vz-fe mount to fit our engines (5vz) with timing covers. A Few weeks out yet...

06-19-2007, 04:54 PM	#13 (permalink)
thwam Cage Fighter Join Date: May 2005 Posts: 235 Thanks: 0 Thanked 6 Times in 6 Posts iTrader Rating: (0/0% )	Nice looking mount. Now get to work on an AC bracket for the 5VZ...=)

06-20-2007, 11:09 AM	#14 (permalink)
Spektrewing386 Believer in Metric System Join Date: Sep 2005 Location: Atlanta, GA Posts: 590 Thanks: 7 Thanked 22 Times in 20 Posts My Google Map iTrader Rating: (1/100% )	i got dibs on the next available 3vz mount.

06-20-2007, 11:28 AM	#15 (permalink)
gsus Hey! Zeus Join Date: Oct 2005 Location: chicago Posts: 188 Thanks: 1 Thanked 1 Time in 1 Post iTrader Rating: (4/100% )	I found my mount sitting on my desk today!!! Looks great! I'm a bit curios on as to what the purpose of the riveted down cover is for?

06-20-2007, 01:47 PM	#16 (permalink)
Weasy2k 3.4L 10K RPM In the works Join Date: Mar 2005 Location: Vancouver, BC Posts: 8,928 Thanks: 34 Thanked 76 Times in 65 Posts iTrader Rating: (6/100% )	Heheh I dont have a/c so its hard to get a design made up More mounts should be on the way next week! Gsus good to hear! They are pretty damn nice. The rivet plate is to go over the water pump. Instead of leaving it just a open hole the plate closes it. If you did not cut the hole then the mount would hit the water pump

06-22-2007, 10:25 AM	#17 (permalink)
Epic_Gamer That's Ol' Kentucky Shark Join Date: May 2006 Location: Tucson Arizona Posts: 118 Thanks: 1 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	O ya babe.. this is going on my list.

07-06-2007, 05:26 PM	#18 (permalink)
Spektrewing386 Believer in Metric System Join Date: Sep 2005 Location: Atlanta, GA Posts: 590 Thanks: 7 Thanked 22 Times in 20 Posts My Google Map iTrader Rating: (1/100% )	any updates on the status of the mounts?