Search:

If you're just trying to set the timing to stock 10°, then there is no need for an advance light since 10° is clearly marked. Now if you want to set it to an odd (unmarked) number like 12° or...

^yes..esp cause its a shielded circuit. The shielding doesnt start til a few inches back of the connector, but it needs to be there or else it will pick up interference and cause issues. I had issues...

you may want to pull the distributor..check the harness connector to it for frayed/damaged wires, check the cam drive portion of it for wear, inspect air gap, etc..per the bgb. PS, when setting the...

I might be able to do that. My schedule just changed at work, so I do work weekends. It would all depend on if my schedule works with your schedule.

Do you have an engine crane to do this? The...

check youtube for gel coat repair, there was one done on some sort of trailer but it is the same thing as a body kit, and it was very informitive and accurate. remember though, if there are any type...

I'd be inclined to get a couple of 5mm hubcentric spacers for the front, just in case you're a bit too near those coilovers. It should clear as is though, but you might be more comfortable with a...