Search:

I would put it on ebay and let him know the link if you were going to sell it so he can have a chance like everyone else.

If not, keep it.

Call Berk Technology and ask if Baktash has been given any of those exhausts recently or if he even ordered it?

949-387-9581

Read the feedback section here on the forum.

did you notice your gears grinding at all while shifting before this happened?

That isn't a 98 MR2. Looks like a 91-93.

I recommend starting a new thread with some of the accident details and put a link here so people won't flood this thread with "what happened?"

Inspect the car personally, ask where it was hit.

Look at where it was hit.

Is the work satisfactory?
Can you see any bends in the framing/subframing?
Take it for a drive, does it pull one...

lol, thanks for the response Aaron, didn't want to be answering questions that could help a divorce or criminal lawyer.


Let's see here, I bought a set of JDM Foglights from Aaron back in...

Very common problem however I think you should have checked here first rather than spending all that money on that stuff.

The biggest issue is the fact that our cars are simply old. The wiring in...

These are somewhat rare engines and were only sold in Japan. Importing them can be expensive.

Ebay is usually your best bet unless you find a private seller.

There is surprisingly a bunch for sale right now between $1800 and $2400

Intakes right now is not a priority as stated above. You want to feel a real difference?

Get a downpipe, exhaust, boost controller and gauge, and that is when you will notice a fabulous...

First, pinpoint the problem. Fill it up with water, turn it on and find the leak. Run the heater while doing this and DO NOT LET IT OVERHEAT

Yeah...no brainer.

Get a ball joint kit off ebay and fix that. (i recommend this kit, worked great for me)
SUSPENSION TOYOTA MR2 91-95 BALL JOINTS TIE ROD ENDS : eBay Motors (item 390103747424...

I haven't heard of anything but you might consider contacting ATS racing out in your neck of the woods and see if they have one. They do tons of swaps a year and I wouldn't be surprised if they had...

you might try the regional forums and see if someone could give you a hand. Also check out the links section on top of the page in the main header, there is a DIY section with tons of write-ups and...

Maintenance! When you get a new ride, be sure to perform the regular maintenance it requires. 99% of the time people look at modifying there deuce once they get it and don't look at what the car...

First question I would ask is.....How much?

Having a mechanic owning a car can be a good thing or a bad thing. The good thing is they keep the vehicle within great working order, the bad thing...

Very cool!

Looking forward reading about this more when you are 100% done. Keep up the good work!

Your front bumper is Bomex with the hole closed.

I have a Bomex front bumper (with the hole closed), veilside (invader) sides and rear end, Toms scoop, and TRD wing.
...

Oh man, you are literally 3 miles away from Border Racing who was the original designer of those types of hoods. Its right across the street from the big mall on 16 and you will see all of the MR2's...

Very cool to have!

Very cool

Brake pads have little shims built into them so when they run very low, they will squeal. This is most likely your problem. Time to replace the brake pads. Don't forget to have your rotors turned...

Picture 1 and picture 2 = Charcoal canister. That buzzes for awhile after you turn off your car. That is probably what it is your hearing..... Pay no attention to it. It has to do with emmisions...

1. Everyone has there own reason. I would say the top 2 reason are aesthetics or performance. To each there own.

2. You have 3 models to choose from. 85-89 MK1 MR2, 91-95 Mk2 MR2, and 00-05 MR2...