have ever seen a camber mr2

MR2noobiii · 02-07-2009, 01:24 AM

hey guys i was working on a s2000 cambering my friend s wheels and i was wounder how would it look on an mr2?????? pic plz

masagsxr · 02-07-2009, 01:39 AM

since ur already working on ur friend's, maybe u should try it on urs and u can send us pix =)

MR2noobiii · 02-07-2009, 01:46 AM

hahahahah well i herd that you can adjust them. so i was wondering has any one done it before.... well i guess i will give it a try.. still pic anyone.

masagsxr · 02-07-2009, 02:06 AM

stop by the drop meet if u can. U can try it on one of the guy's car

MR2noobiii · 02-07-2009, 02:11 AM

hahahah when i s it ???? ya for sure when and were well my mr2 still in the shop.....

but u bet i would go if my car gets done i miss the mr2 guys. would will let me try it?

masagsxr · 02-07-2009, 02:19 AM

probably not. I'm sure they dont wanna mess their alignment.... its in 2 weeks... stop by socal section

MR2noobiii · 02-07-2009, 02:21 AM

dam still want to see it before i do it.......

Kurdain · 02-07-2009, 02:52 AM

What do you mean?
You mean has anyone adjusted the camber on their MR2?

Also this should be posted under the General section or pic request sections, you would most likely get a better response.

MR2noobiii · 02-07-2009, 02:57 AM

ok then well has any one adjusted camber on there mr2

Kurdain · 02-07-2009, 03:09 AM

Yes.
Anytime you take in your MR2 for an alignment they at least look and/or adjust your camber for wear or whatever the specs state they are.

It is EASY to adjust your camber, the hard part is getting it into spec without a very expensive alignment machine.
You just loosen the 2 big bolts that hold your strut to the spindle and move it where you need it and retighten.

If you lower your MR2 you should look into a camber kit, which comes in different flavors but are basically a bolt with an eccentric shoulder to allow for additional adjustment.

Again you need an anlignment machine to adjust them properly but you can get it close enough in the garage to put it together and drive to the alignment shop.

mr29180 · 02-07-2009, 04:46 AM

My freind told me when I went to his shop mr2's have a Lil camber to play...
This is what he said " dude ur alignment is really really tight!!!! As in tight tight!!!!"
It's like .01 or .02 on a machine or somethin...

02-07-2009, 01:24 AM	#1 (permalink)
MR2noobiii Cage Fighter Join Date: May 2008 Posts: 505 Thanks: 0 Thanked 3 Times in 2 Posts iTrader Rating: (0/0% )	have ever seen a camber mr2 hey guys i was working on a s2000 cambering my friend s wheels and i was wounder how would it look on an mr2?????? pic plz

02-07-2009, 03:09 AM	#10 (permalink)
Kurdain Cage Fighter Join Date: Oct 2006 Posts: 685 Thanks: 39 Thanked 35 Times in 29 Posts iTrader Rating: (9/100% )	Yes. Anytime you take in your MR2 for an alignment they at least look and/or adjust your camber for wear or whatever the specs state they are. It is EASY to adjust your camber, the hard part is getting it into spec without a very expensive alignment machine. You just loosen the 2 big bolts that hold your strut to the spindle and move it where you need it and retighten. If you lower your MR2 you should look into a camber kit, which comes in different flavors but are basically a bolt with an eccentric shoulder to allow for additional adjustment. Again you need an anlignment machine to adjust them properly but you can get it close enough in the garage to put it together and drive to the alignment shop. Last edited by Kurdain; 02-07-2009 at 07:38 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-07-2009, 01:39 AM	#2 (permalink)
masagsxr Cage Fighter Join Date: Sep 2008 Location: Norwalk, CA Posts: 3,534 Thanks: 1 Thanked 81 Times in 81 Posts iTrader Rating: (1/100% )	since ur already working on ur friend's, maybe u should try it on urs and u can send us pix =)

02-07-2009, 01:46 AM	#3 (permalink)
MR2noobiii Cage Fighter Join Date: May 2008 Posts: 505 Thanks: 0 Thanked 3 Times in 2 Posts iTrader Rating: (0/0% )	hahahahah well i herd that you can adjust them. so i was wondering has any one done it before.... well i guess i will give it a try.. still pic anyone.

02-07-2009, 02:06 AM	#4 (permalink)
masagsxr Cage Fighter Join Date: Sep 2008 Location: Norwalk, CA Posts: 3,534 Thanks: 1 Thanked 81 Times in 81 Posts iTrader Rating: (1/100% )	stop by the drop meet if u can. U can try it on one of the guy's car

02-07-2009, 02:11 AM	#5 (permalink)
MR2noobiii Cage Fighter Join Date: May 2008 Posts: 505 Thanks: 0 Thanked 3 Times in 2 Posts iTrader Rating: (0/0% )	hahahah when i s it ???? ya for sure when and were well my mr2 still in the shop..... but u bet i would go if my car gets done i miss the mr2 guys. would will let me try it?

02-07-2009, 02:19 AM	#6 (permalink)
masagsxr Cage Fighter Join Date: Sep 2008 Location: Norwalk, CA Posts: 3,534 Thanks: 1 Thanked 81 Times in 81 Posts iTrader Rating: (1/100% )	probably not. I'm sure they dont wanna mess their alignment.... its in 2 weeks... stop by socal section

02-07-2009, 02:21 AM	#7 (permalink)
MR2noobiii Cage Fighter Join Date: May 2008 Posts: 505 Thanks: 0 Thanked 3 Times in 2 Posts iTrader Rating: (0/0% )	dam still want to see it before i do it.......

02-07-2009, 02:52 AM	#8 (permalink)
Kurdain Cage Fighter Join Date: Oct 2006 Posts: 685 Thanks: 39 Thanked 35 Times in 29 Posts iTrader Rating: (9/100% )	What do you mean? You mean has anyone adjusted the camber on their MR2? Also this should be posted under the General section or pic request sections, you would most likely get a better response.

02-07-2009, 02:57 AM	#9 (permalink)
MR2noobiii Cage Fighter Join Date: May 2008 Posts: 505 Thanks: 0 Thanked 3 Times in 2 Posts iTrader Rating: (0/0% )	ok then well has any one adjusted camber on there mr2

02-07-2009, 04:46 AM	#11 (permalink)
mr29180 Cage fighter Join Date: Mar 2008 Location: Frisco (bay area) Posts: 1,368 Thanks: 7 Thanked 42 Times in 37 Posts iTrader Rating: (2/100% )	My freind told me when I went to his shop mr2's have a Lil camber to play... This is what he said " dude ur alignment is really really tight!!!! As in tight tight!!!!" It's like .01 or .02 on a machine or somethin...