7MGTE CT26 + 3S-GTE - Page 3

MR2Matt · 09-24-2006, 01:09 AM

The CTD06 isn't going to be very cost effective, unless you already have a supra turbo, and or an upgraded mr2 ct26 laying around, like i did. I had lots of time and just felt like tossing something together to see if it would work, it did.

mister3 · 09-25-2006, 05:46 AM

Quote:

Originally Posted by Weasy2k

Start a thread in your section to expose this stuff...this looks like agreat alternative to removing an entire stockish turbo setup

like Matthew says -- it isn't worth doing these types of things unless you have al of the bits and pieces necessary + are handy at making some of your own parts.

besides... Matt did a pictorial on what he did to make the CTD06 on the other board a long time ago... didn't detail every tidbit but was a decent overview.

Weasy2k · 09-25-2006, 01:46 PM

Well then

Significant · 11-17-2006, 12:16 PM

im going to be swapping out my turbo soon again... ive been looking for quite a while and i still cant find a supra ct26 dp flange...

MR2Matt · 11-17-2006, 04:10 PM

i made my flange

mister3 · 11-17-2006, 05:02 PM

Quote:

Originally Posted by MR2Matt

i made my flange

and you hybrided MY turbos..... poor turbos.....

will get you for that Matty =D

Significant · 11-19-2006, 08:04 AM

haha ya well i cant make my own flange and i dont weld... but ya i found this one site that sells dp's for the 7m ct26 and some flanges...
matt would you be interested in making me a dp for the supra exhaust side if i paid you pretty good to do it?
http://www.bicperformance.com/products.htm

MR2Matt · 11-20-2006, 02:59 AM

Quote:

Originally Posted by L J

haha ya well i cant make my own flange and i dont weld... but ya i found this one site that sells dp's for the 7m ct26 and some flanges...
matt would you be interested in making me a dp for the supra exhaust side if i paid you pretty good to do it?
http://www.bicperformance.com/products.htm

that seems doable, i just have to mull over the numbers first....

RHC6 · 02-02-2007, 01:57 PM

im currently using a 7mct26 with a MR2 ct26 exhaust housing,i've tried switching and repositioning the actuator but it always boost all the way up to 1.3bar.....does this mean i can't use the mr2 exhaust housing?

MR2TuRbZ · 02-02-2007, 04:41 PM

mister3 · 02-02-2007, 10:45 PM

Quote:

Originally Posted by RHC6

im currently using a 7mct26 with a MR2 ct26 exhaust housing,i've tried switching and repositioning the actuator but it always boost all the way up to 1.3bar.....does this mean i can't use the mr2 exhaust housing?

either that or you have the wastegate rod binding and not opening like it should

RHC6 · 02-03-2007, 12:36 AM

mister3 are you using the 7M exhaust housing?

Sang · 02-03-2007, 01:57 AM

Quote:

Originally Posted by RHC6

mister3 are you using the 7M exhaust housing?

no, but matt used to

RHC6 · 02-03-2007, 03:30 AM

Quote:

Originally Posted by Sang

no, but matt used to

did he have the same problem boosting at 1.3bar?or was it normal?

canadam · 02-06-2007, 08:29 PM

I'd be interested in hearing all the details over here

Maybe it could be posted in the Chico forum.

mister3 · 02-10-2007, 03:05 AM

Quote:

Originally Posted by canadam

I'd be interested in hearing all the details over here

Maybe it could be posted in the Chico forum.

when i get a chance to we'll post all the info in the CRW forum and possibly link it to here for anyone looking for this type of upgrade

Significant · 02-11-2007, 12:15 AM

josh... maybe you could even post some progress pics on the dp =P

Mekkahfire · 04-18-2007, 08:52 PM

What ever happened to this crazy hybrid turbo that was talked about?

butter nuts · 04-24-2007, 02:33 AM

I have the supra ct26 upgrade on mine. Seems to have alot less torque and alot more top end. Dont have any numbers though.

Significant · 05-17-2007, 09:38 PM

heres some updated pictures before i send the turbo out to get a compressor upgrade... ive talked to doug quite a bit trying to find the best upgrade... ill let you know how it does once the turbo comes back upgraded...

09-25-2006, 01:46 PM	#43 (permalink)
Weasy2k 3.4L 10K RPM In the works Join Date: Mar 2005 Location: Vancouver, BC Posts: 8,895 Thanks: 34 Thanked 80 Times in 66 Posts iTrader Rating: (9/100% )	Well then __________________ -Johnny @ Sea2Sky Tuning - www.sea2skytuning.com http://www.mr2.com/forums/sea2sky-tu...-out-sale.html

11-19-2006, 08:04 AM	#47 (permalink)
Significant SleepyW20 Join Date: Feb 2005 Location: Virginia Beach Posts: 271 Thanks: 1 Thanked 0 Times in 0 Posts iTrader Rating: (4/100% )	haha ya well i cant make my own flange and i dont weld... but ya i found this one site that sells dp's for the 7m ct26 and some flanges... matt would you be interested in making me a dp for the supra exhaust side if i paid you pretty good to do it? http://www.bicperformance.com/products.htm Last edited by Significant; 11-19-2006 at 08:09 AM.

02-02-2007, 04:41 PM	#50 (permalink)
MR2TuRbZ Local V8 Killer Join Date: Jun 2005 Location: Indianapolis Posts: 556 Thanks: 8 Thanked 7 Times in 7 Posts My Google Map iTrader Rating: (2/100% )	... Last edited by MR2TuRbZ; 02-02-2007 at 04:42 PM. Reason: wrong thread, lol

02-06-2007, 08:29 PM	#55 (permalink)
canadam MidshipExpress Join Date: Feb 2005 Location: Beautiful British Columbia Posts: 9,544 Thanks: 117 Thanked 129 Times in 112 Posts My Google Map iTrader Rating: (29/100% )	I'd be interested in hearing all the details over here Maybe it could be posted in the Chico forum. __________________ WTB ASAP: Black Glove Box Surround - Not the box itself, but the dash plastics it sits in 3SGTE Upper Timing Belt Cover Driver's side seatback - must have bolster and lumbar adjustments, cover condition does not matter - will trade non-adjustable. Genuine Tom's Sides and Rear - replica kits not considered Frunk Plastics - no cracks Mechanical Gauge Cluster - KP/H preferred, but not required. Engine Bay X Brace

05-17-2007, 09:38 PM	#60 (permalink)
Significant SleepyW20 Join Date: Feb 2005 Location: Virginia Beach Posts: 271 Thanks: 1 Thanked 0 Times in 0 Posts iTrader Rating: (4/100% )	heres some updated pictures before i send the turbo out to get a compressor upgrade... ive talked to doug quite a bit trying to find the best upgrade... ill let you know how it does once the turbo comes back upgraded... Last edited by Significant; 12-26-2008 at 03:23 AM.

09-24-2006, 01:09 AM	#41 (permalink)
MR2Matt Banned Seller Join Date: Sep 2006 Posts: 10 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (-1/0% )	The CTD06 isn't going to be very cost effective, unless you already have a supra turbo, and or an upgraded mr2 ct26 laying around, like i did. I had lots of time and just felt like tossing something together to see if it would work, it did.

11-17-2006, 12:16 PM	#44 (permalink)
Significant SleepyW20 Join Date: Feb 2005 Location: Virginia Beach Posts: 271 Thanks: 1 Thanked 0 Times in 0 Posts iTrader Rating: (4/100% )	im going to be swapping out my turbo soon again... ive been looking for quite a while and i still cant find a supra ct26 dp flange...

11-17-2006, 04:10 PM	#45 (permalink)
MR2Matt Banned Seller Join Date: Sep 2006 Posts: 10 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (-1/0% )	i made my flange

02-02-2007, 01:57 PM	#49 (permalink)
RHC6 Some Skills Join Date: Jan 2007 Posts: 62 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	im currently using a 7mct26 with a MR2 ct26 exhaust housing,i've tried switching and repositioning the actuator but it always boost all the way up to 1.3bar.....does this mean i can't use the mr2 exhaust housing?

02-03-2007, 12:36 AM	#52 (permalink)
RHC6 Some Skills Join Date: Jan 2007 Posts: 62 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	mister3 are you using the 7M exhaust housing?

02-11-2007, 12:15 AM	#57 (permalink)
Significant SleepyW20 Join Date: Feb 2005 Location: Virginia Beach Posts: 271 Thanks: 1 Thanked 0 Times in 0 Posts iTrader Rating: (4/100% )	josh... maybe you could even post some progress pics on the dp =P

04-18-2007, 08:52 PM	#58 (permalink)
Mekkahfire Gone But Not Forgotten Join Date: Mar 2005 Location: Westerville OH Posts: 1,359 Thanks: 9 Thanked 3 Times in 3 Posts iTrader Rating: (2/75% )	What ever happened to this crazy hybrid turbo that was talked about?

04-24-2007, 02:33 AM	#59 (permalink)
butter nuts The Dissident Join Date: Apr 2007 Posts: 460 Thanks: 10 Thanked 18 Times in 14 Posts iTrader Rating: (2/100% )	I have the supra ct26 upgrade on mine. Seems to have alot less torque and alot more top end. Dont have any numbers though.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://www.mr2.com/forums/turbo-3s-gte/Toyota-MR2-3425-7mgte-ct26-3s-gte.html
Posted By	For	Type	Date
Toyota MR2 Message Board	This thread	Refback	09-12-2007 08:55 PM