3S-GTE JDM 3rd Gen Turbo Engine What other USDM motors share gen3 under bucket shims?

boostd4 · 03-03-2009, 08:18 PM

I've been searching a while for a direct replacement shim for gen3 shim-under-bucket shims.

I'm going to be installing cams and adjusting valve clearances and want to be able to source new shims of the right thicknesses.

I found these gen3 OEM shim part numbers while searching:

13753-88003 T=2.50 mm
13753-88053 T=2.55 mm
13753-88103 T=2.60 mm
13753-88153 T=2.65 mm
13753-88203 T=2.70 mm
13753-88253 T=2.75 mm
13753-88303 T=2.80 mm
13753-88353 T=2.85 mm
13753-88403 T=2.90 mm
13753-88453 T=2.95 mm
13753-88503 T=3.00 mm
13753-88553 T=3.05 mm
13753-88603 T=3.10 mm
13753-88653 T=3.15 mm
13753-88703 T=3.20 mm
13753-88753 T=3.25 mm
13753-88803 T=3.30 mm
13753-88853 T=3.35 mm
13753-88893 T=3.39 mm

.... does anyone know if these are available in the US, or if there are shims of identicle spec from another Toyota motor readily available at US Toyota dealers?

I've left parts requests at several dealers/members but have yet to hear back.

Thanks!

presure2 · 03-04-2009, 09:52 AM

those #'s dont work in the partznet system, so that makes me assume there are no usdm cars that use them?

MANDALAY · 03-04-2009, 07:03 PM

I can help you with shimes as long as you know the EXACT mm to 0.05 from Toyota or you can just get an engineering shop to make them for you down to 0.01 )

03-03-2009, 08:18 PM	#1 (permalink)
boostd4 GT28RS 350whp or bust! Join Date: May 2005 Location: Chicago, IL Posts: 303 Thanks: 1 Thanked 6 Times in 6 Posts iTrader Rating: (4/100% )	What other USDM motors share gen3 under bucket shims? I've been searching a while for a direct replacement shim for gen3 shim-under-bucket shims. I'm going to be installing cams and adjusting valve clearances and want to be able to source new shims of the right thicknesses. I found these gen3 OEM shim part numbers while searching: 13753-88003 T=2.50 mm 13753-88053 T=2.55 mm 13753-88103 T=2.60 mm 13753-88153 T=2.65 mm 13753-88203 T=2.70 mm 13753-88253 T=2.75 mm 13753-88303 T=2.80 mm 13753-88353 T=2.85 mm 13753-88403 T=2.90 mm 13753-88453 T=2.95 mm 13753-88503 T=3.00 mm 13753-88553 T=3.05 mm 13753-88603 T=3.10 mm 13753-88653 T=3.15 mm 13753-88703 T=3.20 mm 13753-88753 T=3.25 mm 13753-88803 T=3.30 mm 13753-88853 T=3.35 mm 13753-88893 T=3.39 mm .... does anyone know if these are available in the US, or if there are shims of identicle spec from another Toyota motor readily available at US Toyota dealers? I've left parts requests at several dealers/members but have yet to hear back. Thanks!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-04-2009, 09:52 AM	#2 (permalink)
presure2 Team 5SFTE Pro Member Join Date: Dec 2007 Location: fall river, MA Posts: 132 Thanks: 1 Thanked 13 Times in 13 Posts iTrader Rating: (1/100% )	those #'s dont work in the partznet system, so that makes me assume there are no usdm cars that use them?

03-04-2009, 07:03 PM	#3 (permalink)
MANDALAY Beams Owners Group Join Date: Feb 2007 Location: victoria AUSTRALIA Posts: 4,210 Thanks: 136 Thanked 112 Times in 107 Posts My Google Map iTrader Rating: (6/100% )	I can help you with shimes as long as you know the EXACT mm to 0.05 from Toyota or you can just get an engineering shop to make them for you down to 0.01 )