3S-GTE JDM 3rd Gen Turbo Engine Gen 3 swap done!

Mirazh · 07-30-2009, 09:35 AM

Finally done with my swap after many delays!! Found out what was making it run so crappy, my MAP sensor got all messed up in my swap somehow, so i'm using my buddies Supra MAP till i can find a replacement and/or pay for it lol.

stewart · 07-30-2009, 10:20 AM

Quote:

Originally Posted by Mirazh

Finally done with my swap after many delays!! Found out what was making it run so crappy, my MAP sensor got all messed up in my swap somehow, so i'm using my buddies Supra MAP till i can find a replacement and/or pay for it lol.

do you have na body and did your 3rd gen harness plug up or did you have to re wire 3rd harness

Mirazh · 07-30-2009, 10:45 AM

My car was a 92 N/A, i got the full harness with my engine swap. I just ran it up to the kick and plugged it right in. super painless engine swap except for the problems i ran in that were stupid forgetfull-ness

Mirazh · 07-30-2009, 10:59 AM

Anyone here that has done this swap mind helping me with one quick problem i am having? I thought i read about it somewhere in the forum, but i just did a search and couldn't find it.

My Airbag light is staying on, even with the key out. When i hit the brake pedal it goes out though.

hoodain · 08-16-2009, 11:44 AM

Quote:

Originally Posted by Mirazh

Anyone here that has done this swap mind helping me with one quick problem i am having? I thought i read about it somewhere in the forum, but i just did a search and couldn't find it.

My Airbag light is staying on, even with the key out. When i hit the brake pedal it goes out though.

This should help.

charto911 · 08-17-2009, 12:26 AM

let me know if your engine smokes at all. I have an identical swap as you.

kreisydude · 09-01-2009, 01:14 PM

I am thinking of buying a gen 3 clip and swapping it into my 1992 Turbo Mr2. Is there anything you might recommend or give a heads up?

07-30-2009, 09:35 AM	#1 (permalink)
Mirazh No Skills Join Date: Jun 2006 Posts: 123 Thanks: 2 Thanked 1 Time in 1 Post iTrader Rating: (1/100% )	Gen 3 swap done! Finally done with my swap after many delays!! Found out what was making it run so crappy, my MAP sensor got all messed up in my swap somehow, so i'm using my buddies Supra MAP till i can find a replacement and/or pay for it lol.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-30-2009, 10:45 AM	#3 (permalink)
Mirazh No Skills Join Date: Jun 2006 Posts: 123 Thanks: 2 Thanked 1 Time in 1 Post iTrader Rating: (1/100% )	My car was a 92 N/A, i got the full harness with my engine swap. I just ran it up to the kick and plugged it right in. super painless engine swap except for the problems i ran in that were stupid forgetfull-ness

07-30-2009, 10:59 AM	#4 (permalink)
Mirazh No Skills Join Date: Jun 2006 Posts: 123 Thanks: 2 Thanked 1 Time in 1 Post iTrader Rating: (1/100% )	Anyone here that has done this swap mind helping me with one quick problem i am having? I thought i read about it somewhere in the forum, but i just did a search and couldn't find it. My Airbag light is staying on, even with the key out. When i hit the brake pedal it goes out though.

08-17-2009, 12:26 AM	#6 (permalink)
charto911 Cage Fighter Join Date: Jul 2007 Location: West Palm Beach Posts: 379 Thanks: 7 Thanked 2 Times in 2 Posts iTrader Rating: (3/100% )	let me know if your engine smokes at all. I have an identical swap as you.

09-01-2009, 01:14 PM	#7 (permalink)
kreisydude No Skills Join Date: Nov 2008 Posts: 27 Thanks: 2 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	I am thinking of buying a gen 3 clip and swapping it into my 1992 Turbo Mr2. Is there anything you might recommend or give a heads up?