3S-GTE JDM 3rd Gen Turbo Engine NO CEL LIGHT!!

e30 · 08-23-2009, 06:24 PM

Hi, my car has been in safe mode for a while and i've been trying to figure it out. I've tested out most of the sensors and replaced the ones the ones that were out of spec and the car is still in low boost mode.

I tried pulling the engine codes but i have no CEL light. I pulled out the cluster todya and there's a working lightbulb in there but still no light. Can somebody give me directions to hoook it up? Is there another way to pull engine codes?

e30 · 08-23-2009, 06:29 PM

http://img132.imageshack.us/i/dsc00208mgq.jpg

on a side note, can somebody tell me wehre these vacuum lines connect to?

TreyMR2 · 08-27-2009, 08:01 PM

pic doesn't work

08-23-2009, 06:24 PM	#1 (permalink)
e30 Some Skills Join Date: Jan 2008 Posts: 57 Thanks: 2 Thanked 0 Times in 0 Posts iTrader Rating: (1/100% )	NO CEL LIGHT!! Hi, my car has been in safe mode for a while and i've been trying to figure it out. I've tested out most of the sensors and replaced the ones the ones that were out of spec and the car is still in low boost mode. I tried pulling the engine codes but i have no CEL light. I pulled out the cluster todya and there's a working lightbulb in there but still no light. Can somebody give me directions to hoook it up? Is there another way to pull engine codes?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-23-2009, 06:29 PM	#2 (permalink)
e30 Some Skills Join Date: Jan 2008 Posts: 57 Thanks: 2 Thanked 0 Times in 0 Posts iTrader Rating: (1/100% )	http://img132.imageshack.us/i/dsc00208mgq.jpg on a side note, can somebody tell me wehre these vacuum lines connect to?

08-27-2009, 08:01 PM	#3 (permalink)
TreyMR2 Gen3 swap DONE!! Join Date: Jun 2007 Posts: 2,472 Thanks: 30 Thanked 60 Times in 58 Posts iTrader Rating: (10/100% )	pic doesn't work