3S-GTE USDM Turbo Engine Wire run for boost gauge pressure sensor

sabing · 10-20-2009, 07:07 PM

Hi guys ive got the gauge cluster portion done for a digital boost gauge, i was wondering where you guys run the wires for the pressure sensor through the engine bay and how you protect them? Any advice? Pictures of your setup would be nice if you have them thanks.

sabing · 10-20-2009, 09:52 PM

anyone?

kim0663 · 10-23-2009, 07:44 AM

loom it with electrical tape. Maybe put those nice plastic wire cover things and wire it far away from the turbo/manifold and just follow the metal walls?

I tee'd it from the factory map sensor and goes thru the little hole hidden behind the intercooler.

If you tee'd it from the BOV/BPV, it may be easier to go thru the passenger side. Both easily accessable. Intercooler may get annoying if you're still running stock as it blocks vision and less 'finger' room

sabing · 10-26-2009, 01:44 AM

Alright thanks for the input
i'll look into this at the same i replace my knock sensor in the next few days..

10-20-2009, 07:07 PM	#1 (permalink)
sabing Plasma Donor for HDTV's Join Date: Oct 2009 Location: Alberta Posts: 295 Thanks: 13 Thanked 5 Times in 5 Posts iTrader Rating: (0/0% )	Wire run for boost gauge pressure sensor Hi guys ive got the gauge cluster portion done for a digital boost gauge, i was wondering where you guys run the wires for the pressure sensor through the engine bay and how you protect them? Any advice? Pictures of your setup would be nice if you have them thanks. Last edited by sabing; 10-20-2009 at 09:52 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-20-2009, 09:52 PM	#2 (permalink)
sabing Plasma Donor for HDTV's Join Date: Oct 2009 Location: Alberta Posts: 295 Thanks: 13 Thanked 5 Times in 5 Posts iTrader Rating: (0/0% )	anyone?

10-23-2009, 07:44 AM	#3 (permalink)
kim0663 MISTA2 Join Date: Apr 2008 Location: New Zealand, Posts: 15 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	loom it with electrical tape. Maybe put those nice plastic wire cover things and wire it far away from the turbo/manifold and just follow the metal walls? I tee'd it from the factory map sensor and goes thru the little hole hidden behind the intercooler. If you tee'd it from the BOV/BPV, it may be easier to go thru the passenger side. Both easily accessable. Intercooler may get annoying if you're still running stock as it blocks vision and less 'finger' room

10-26-2009, 01:44 AM	#4 (permalink)
sabing Plasma Donor for HDTV's Join Date: Oct 2009 Location: Alberta Posts: 295 Thanks: 13 Thanked 5 Times in 5 Posts iTrader Rating: (0/0% )	Alright thanks for the input i'll look into this at the same i replace my knock sensor in the next few days..