3S-GTE JDM 3rd Gen Turbo Engine Gen 3 Exh. Mani gskt

CJMR2T · 11-01-2009, 04:25 PM

Ok, I know that the Gen 2 and Gen 3 gaskets are different simply because the Gen 3's have two more mounting bolts, but besides that, does anyone know if they are the same or atleast if the port spacing is the same?

CJMR2T · 11-01-2009, 04:55 PM

Ok, disregard my question, I answered it myself. I forgot that i had a Gen 2 gasket here and I wend outside and quickly realize that all the bolt spacings and the port spacings are different between the Gen 2's and Gen 3's...

Guess I'll have to order a gen 3 gasket to do a drawing of the flange..... oh well...

pitcelica · 11-17-2009, 06:12 PM

Hi, here is a cad drawing I did by taking measurements on a gen 3 exhaust manifold gasket :

I hope that this will help you!

sam

CJMR2T · 11-17-2009, 06:15 PM

Sam, I see that that screen shot is of the drawing in AutoCAD. Is there anyway you could / would email me that cad file?

pitcelica · 11-17-2009, 06:18 PM

no problem, send me your email address so I can join it to a mail.

CJMR2T · 11-17-2009, 06:41 PM

Quote:

Originally Posted by pitcelica

no problem, send me your email address so I can join it to a mail.

PM sent,
Thanks again!!!!!!!!!!!!!!!

pitcelica · 11-17-2009, 10:10 PM

cad drawing sent

11-01-2009, 04:25 PM	#1 (permalink)
CJMR2T Fabricator Join Date: Oct 2009 Location: Lakeland, FL Posts: 3,677 Thanks: 3 Thanked 353 Times in 335 Posts iTrader Rating: (4/100% )	Gen 3 Exh. Mani gskt Ok, I know that the Gen 2 and Gen 3 gaskets are different simply because the Gen 3's have two more mounting bolts, but besides that, does anyone know if they are the same or atleast if the port spacing is the same?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-01-2009, 04:55 PM	#2 (permalink)
CJMR2T Fabricator Join Date: Oct 2009 Location: Lakeland, FL Posts: 3,677 Thanks: 3 Thanked 353 Times in 335 Posts iTrader Rating: (4/100% )	Ok, disregard my question, I answered it myself. I forgot that i had a Gen 2 gasket here and I wend outside and quickly realize that all the bolt spacings and the port spacings are different between the Gen 2's and Gen 3's... Guess I'll have to order a gen 3 gasket to do a drawing of the flange..... oh well...

11-17-2009, 06:12 PM	#3 (permalink)
pitcelica No Skills Join Date: Jan 2008 Posts: 44 Thanks: 0 Thanked 4 Times in 4 Posts iTrader Rating: (0/0% )	Hi, here is a cad drawing I did by taking measurements on a gen 3 exhaust manifold gasket : I hope that this will help you! sam

11-17-2009, 06:15 PM	#4 (permalink)
CJMR2T Fabricator Join Date: Oct 2009 Location: Lakeland, FL Posts: 3,677 Thanks: 3 Thanked 353 Times in 335 Posts iTrader Rating: (4/100% )	Sam, I see that that screen shot is of the drawing in AutoCAD. Is there anyway you could / would email me that cad file?

11-17-2009, 06:18 PM	#5 (permalink)
pitcelica No Skills Join Date: Jan 2008 Posts: 44 Thanks: 0 Thanked 4 Times in 4 Posts iTrader Rating: (0/0% )	no problem, send me your email address so I can join it to a mail.

11-17-2009, 10:10 PM	#7 (permalink)
pitcelica No Skills Join Date: Jan 2008 Posts: 44 Thanks: 0 Thanked 4 Times in 4 Posts iTrader Rating: (0/0% )	cad drawing sent