3S-GTE JDM 3rd Gen Turbo Engine 5S to 3rd 3sgte Wiring

Daftboy · 11-03-2009, 05:59 PM

I was wondering how hard the wiring is for this... my friend did a swap from a 5sgte in a celica to a 3rd gen 3sgte and it was not many wires...4 I believe... can anyone help me out here ... thanks

stewart · 11-10-2009, 05:02 PM

I dont think any one on this board knows

Daftboy · 11-10-2009, 06:41 PM

wow... fail =[

stewart · 11-15-2009, 03:46 PM

Its easer if you use complete harnesses ,eng and kick pannel or body harness. 1 plug black with red stripe , you need to change plug so it will plug in. make sure all grounds are good 4 of them. 1 white wire in body harness to body. 1wire from head to body. 1 big wire from trans to body. 1 wire in eng harness to back of intake manifold. fuel pump wire on body harness needs to b spliced in ,same color wires. tale lights need old plugs spliced to new harness . good luck be careful who you buy from

11-03-2009, 05:59 PM	#1 (permalink)
Daftboy No Skills Join Date: Aug 2009 Posts: 8 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	5S to 3rd 3sgte Wiring I was wondering how hard the wiring is for this... my friend did a swap from a 5sgte in a celica to a 3rd gen 3sgte and it was not many wires...4 I believe... can anyone help me out here ... thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-10-2009, 05:02 PM	#2 (permalink)
stewart ad3 Join Date: Jul 2009 Location: foothills NC Posts: 156 Thanks: 4 Thanked 3 Times in 3 Posts iTrader Rating: (0/0% )	I dont think any one on this board knows

11-10-2009, 06:41 PM	#3 (permalink)
Daftboy No Skills Join Date: Aug 2009 Posts: 8 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	wow... fail =[

11-15-2009, 03:46 PM	#4 (permalink)
stewart ad3 Join Date: Jul 2009 Location: foothills NC Posts: 156 Thanks: 4 Thanked 3 Times in 3 Posts iTrader Rating: (0/0% )	Its easer if you use complete harnesses ,eng and kick pannel or body harness. 1 plug black with red stripe , you need to change plug so it will plug in. make sure all grounds are good 4 of them. 1 white wire in body harness to body. 1wire from head to body. 1 big wire from trans to body. 1 wire in eng harness to back of intake manifold. fuel pump wire on body harness needs to b spliced in ,same color wires. tale lights need old plugs spliced to new harness . good luck be careful who you buy from