1mzfe 2001 vvti avalon vacuum line's

evildnb · 04-30-2009, 06:03 PM

hey guys, I received the motor with a bunch of the vacuum lines cut and cant seem to find the proper vacuum line diagrams anywhere. so this is what I'm dealing with...
my questions are:
#1 where does this yellow hose go?
#2 what do these blue hoses connect to? (in the void area)
#3 where does this purple hose connect?ok, goes to TB
#4 and i dont plan on using the evap stuff, can I just cap this off?

evildnb · 05-08-2009, 12:35 PM

I don't live in a state that requires strict emissions control regulations, can I simply block off the evap stuff on this 2001 1mzfe vvti engine? or will I need to retain it for the engine to run proper?

Oteck · 05-08-2009, 07:34 PM

none of the vac diagram is on the book, you should be able to order the sticker from the dealer ship.

1. I did not hook up the vsv mounted on the engine mount, i believe it's there to reduce tq when under full load.

2 & 3. goes to the throttle body

DaveMush · 05-09-2009, 11:50 AM

Click to enlarge...

evildnb · 05-11-2009, 02:37 PM

Quote:

Originally Posted by Oteck

1. I did not hook up the vsv mounted on the engine mount, i believe it's there to reduce tq when under full load.

2 & 3. goes to the throttle body

So if you aren't using the vsv switch, what did you do with the hose I have colored blue in the above diagram? There is a gap in the diagram, does something go inbetween the TB and that vsv? I cant find any sort of comprehensive picture or diagram that illustrates the EXACT routing of the vacuum hoses, sensors, etc..

Also, will the engine run properly without the 1mz & MR2 evap stuff hooked up? I would like to avoid getting the 1mz evap tank, hoses and stuff.. I would rather just block everything off..or recirculate it as clean and simple jack as possible.

04-30-2009, 06:03 PM	#1 (permalink)
evildnb yo momma Join Date: Jul 2006 Location: aurora, illinois Posts: 37 Thanks: 0 Thanked 0 Times in 0 Posts My Google Map iTrader Rating: (2/100% )	1mzfe 2001 vvti avalon vacuum lines hey guys, I received the motor with a bunch of the vacuum lines cut and cant seem to find the proper vacuum line diagrams anywhere. so this is what I'm dealing with... my questions are: #1 where does this yellow hose go? #2 what do these blue hoses connect to? (in the void area) #3 where does this purple hose connect?ok, goes to TB #4 and i dont plan on using the evap stuff, can I just cap this off? Last edited by evildnb; 05-01-2009 at 01:07 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://www.mr2.com/forums/v6-owners-group/Toyota-MR2-40897-1mzfe-2001-vvti-avalon-vacuum-line-s.html
Posted By	For	Type	Date
Everything about 1mz-fe - Yahoo! Glue	This thread	Refback	05-19-2009 12:04 AM

05-08-2009, 12:35 PM	#2 (permalink)
evildnb yo momma Join Date: Jul 2006 Location: aurora, illinois Posts: 37 Thanks: 0 Thanked 0 Times in 0 Posts My Google Map iTrader Rating: (2/100% )	I don't live in a state that requires strict emissions control regulations, can I simply block off the evap stuff on this 2001 1mzfe vvti engine? or will I need to retain it for the engine to run proper?

05-08-2009, 07:34 PM	#3 (permalink)
Oteck Eye'm the Str⑨ngest Join Date: Aug 2005 Location: Burnaby B.C. Posts: 4,947 Thanks: 11 Thanked 172 Times in 157 Posts Blog Entries: 3 iTrader Rating: (5/100% )	none of the vac diagram is on the book, you should be able to order the sticker from the dealer ship. 1. I did not hook up the vsv mounted on the engine mount, i believe it's there to reduce tq when under full load. 2 & 3. goes to the throttle body

05-09-2009, 11:50 AM	#4 (permalink)
DaveMush Mr2 V6 #8 Join Date: Aug 2005 Location: Syracuse, Ny Posts: 413 Thanks: 0 Thanked 14 Times in 11 Posts iTrader Rating: (0/0% )	Click to enlarge...