Anyone still has their v6 axles?

Oteck · 06-16-2009, 11:13 PM

Im in a pickle, i need some info on the v6 axle innards. trying to do a hybrid but it's not possible with the mr2 axle due to it's cage/race design

Maruki-kun · 06-16-2009, 11:37 PM

the MR2 is racist??!?!?!??!?!!?

Oteck · 06-16-2009, 11:53 PM

This (supra)

to this (mr2) does not work

Maruki-kun · 06-16-2009, 11:55 PM

you=fail at e-sarcasm. and why have I never seen those before? lol I need to take my car apart.... lol.

Oteck · 06-17-2009, 12:08 AM

do this look like OT to you? im asking a SERIOUS question

Maruki-kun · 06-17-2009, 12:12 AM

I <3 you....

and I know, I was just making a joke.

what car do they come off of? I'm going to a junk yard tomorrow.

mr2greasemonkey · 06-17-2009, 11:11 AM

You need to get your web cam working Joe. So we can both see the same thing I'm measuring, lol.

Oteck · 06-17-2009, 11:34 AM

ok josh just told me the inner and outer are different, i'm trying to mate the supra outer cv to the mr2 shaft to make my own hybrid axle. Since im using a supra knuckle on my hub it's not possible to use the mr2 as it's spline is smaller. The supra knuckle will allow me to have room for a real handbrake/drum instead of the sissy one on the mr2 caliper

DaveMush · 06-17-2009, 06:14 PM

why not measure the inside diameter of a supra wheel bearing vs the inner diameter of the mr2 wheel bearing and see if the mr2 hub can be pressed into the supra bearing/knuckle assembly???

that way you still keep your mr2 axles (assuming the length is correct.)

Oteck · 06-17-2009, 07:53 PM

the mr2 and supra rears match the bearing but it's slightly longer, im making a spacer for this

MKIII supra axle (narrower than MKIV) on mr2 hub with MKIV knuckle on a test bearing

Im building a new back plate to house the drum handbrakes for my evil project so i can say good by to our crappy hand brakes

Mark_Dorman · 06-23-2009, 04:51 PM

I still have my 3vz camry axles...

Oteck · 07-14-2009, 01:59 AM

got any pics of the innards? the passenger would be the easiest

Mark_Dorman · 07-14-2009, 01:35 PM

I'll see if I can get it apart...what do you need them for?

Oteck · 07-14-2009, 03:24 PM

I need them for a hybrid supra axle project. The supra spline for the outer CV is much larger than the mr2 turbo axle so im hopping the outers on the v6 will fit

Mark_Dorman · 07-15-2009, 01:10 AM

Oh okay...I'll try and get them apart this friday and send you pics

06-16-2009, 11:13 PM	#1 (permalink)
Oteck Eye'm the Str⑨ngest Join Date: Aug 2005 Location: Burnaby B.C. Posts: 4,947 Thanks: 12 Thanked 173 Times in 157 Posts Blog Entries: 3 iTrader Rating: (5/100% )	Anyone still has their v6 axles? Im in a pickle, i need some info on the v6 axle innards. trying to do a hybrid but it's not possible with the mr2 axle due to it's cage/race design

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-16-2009, 11:37 PM	#2 (permalink)
Maruki-kun Cage Fighter Join Date: Mar 2008 Location: Millington, MD Posts: 2,487 Thanks: 9 Thanked 74 Times in 67 Posts My Google Map iTrader Rating: (5/100% )	the MR2 is racist??!?!?!??!?!!?

06-16-2009, 11:53 PM	#3 (permalink)
Oteck Eye'm the Str⑨ngest Join Date: Aug 2005 Location: Burnaby B.C. Posts: 4,947 Thanks: 12 Thanked 173 Times in 157 Posts Blog Entries: 3 iTrader Rating: (5/100% )	This (supra) to this (mr2) does not work

06-16-2009, 11:55 PM	#4 (permalink)
Maruki-kun Cage Fighter Join Date: Mar 2008 Location: Millington, MD Posts: 2,487 Thanks: 9 Thanked 74 Times in 67 Posts My Google Map iTrader Rating: (5/100% )	you=fail at e-sarcasm. and why have I never seen those before? lol I need to take my car apart.... lol.

06-17-2009, 12:08 AM	#5 (permalink)
Oteck Eye'm the Str⑨ngest Join Date: Aug 2005 Location: Burnaby B.C. Posts: 4,947 Thanks: 12 Thanked 173 Times in 157 Posts Blog Entries: 3 iTrader Rating: (5/100% )	do this look like OT to you? im asking a SERIOUS question

06-17-2009, 12:12 AM	#6 (permalink)
Maruki-kun Cage Fighter Join Date: Mar 2008 Location: Millington, MD Posts: 2,487 Thanks: 9 Thanked 74 Times in 67 Posts My Google Map iTrader Rating: (5/100% )	I <3 you.... and I know, I was just making a joke. what car do they come off of? I'm going to a junk yard tomorrow.

06-17-2009, 11:11 AM	#7 (permalink)
mr2greasemonkey Once again....yups Join Date: Sep 2005 Location: Portland, OR Posts: 1,658 Thanks: 4 Thanked 63 Times in 42 Posts iTrader Rating: (0/0% )	You need to get your web cam working Joe. So we can both see the same thing I'm measuring, lol.

06-17-2009, 11:34 AM	#8 (permalink)
Oteck Eye'm the Str⑨ngest Join Date: Aug 2005 Location: Burnaby B.C. Posts: 4,947 Thanks: 12 Thanked 173 Times in 157 Posts Blog Entries: 3 iTrader Rating: (5/100% )	ok josh just told me the inner and outer are different, i'm trying to mate the supra outer cv to the mr2 shaft to make my own hybrid axle. Since im using a supra knuckle on my hub it's not possible to use the mr2 as it's spline is smaller. The supra knuckle will allow me to have room for a real handbrake/drum instead of the sissy one on the mr2 caliper

06-17-2009, 06:14 PM	#9 (permalink)
DaveMush Mr2 V6 #8 Join Date: Aug 2005 Location: Syracuse, Ny Posts: 413 Thanks: 0 Thanked 14 Times in 11 Posts iTrader Rating: (0/0% )	why not measure the inside diameter of a supra wheel bearing vs the inner diameter of the mr2 wheel bearing and see if the mr2 hub can be pressed into the supra bearing/knuckle assembly??? that way you still keep your mr2 axles (assuming the length is correct.)

06-17-2009, 07:53 PM	#10 (permalink)
Oteck Eye'm the Str⑨ngest Join Date: Aug 2005 Location: Burnaby B.C. Posts: 4,947 Thanks: 12 Thanked 173 Times in 157 Posts Blog Entries: 3 iTrader Rating: (5/100% )	the mr2 and supra rears match the bearing but it's slightly longer, im making a spacer for this MKIII supra axle (narrower than MKIV) on mr2 hub with MKIV knuckle on a test bearing Im building a new back plate to house the drum handbrakes for my evil project so i can say good by to our crappy hand brakes

06-23-2009, 04:51 PM	#11 (permalink)
Mark_Dorman So long MR2's... Join Date: Apr 2008 Location: Pasadena, CA Posts: 4,666 Thanks: 97 Thanked 86 Times in 82 Posts Blog Entries: 1 iTrader Rating: (26/100% )	I still have my 3vz camry axles...

07-14-2009, 01:59 AM	#12 (permalink)
Oteck Eye'm the Str⑨ngest Join Date: Aug 2005 Location: Burnaby B.C. Posts: 4,947 Thanks: 12 Thanked 173 Times in 157 Posts Blog Entries: 3 iTrader Rating: (5/100% )	got any pics of the innards? the passenger would be the easiest

07-14-2009, 01:35 PM	#13 (permalink)
Mark_Dorman So long MR2's... Join Date: Apr 2008 Location: Pasadena, CA Posts: 4,666 Thanks: 97 Thanked 86 Times in 82 Posts Blog Entries: 1 iTrader Rating: (26/100% )	I'll see if I can get it apart...what do you need them for?

07-14-2009, 03:24 PM	#14 (permalink)
Oteck Eye'm the Str⑨ngest Join Date: Aug 2005 Location: Burnaby B.C. Posts: 4,947 Thanks: 12 Thanked 173 Times in 157 Posts Blog Entries: 3 iTrader Rating: (5/100% )	I need them for a hybrid supra axle project. The supra spline for the outer CV is much larger than the mr2 turbo axle so im hopping the outers on the v6 will fit

07-15-2009, 01:10 AM	#15 (permalink)
Mark_Dorman So long MR2's... Join Date: Apr 2008 Location: Pasadena, CA Posts: 4,666 Thanks: 97 Thanked 86 Times in 82 Posts Blog Entries: 1 iTrader Rating: (26/100% )	Oh okay...I'll try and get them apart this friday and send you pics