WTB: 4wire oxygen sensor Dead/alive

Oteck · 01-30-2007, 04:59 AM

I need the plugs on the sensor. doesn't have to be working since i have new ones comming. Normaly i would use my stock AFR sensors but the hydra only works on these heated oxygen sensors

Thanks

boobala · 08-03-2007, 04:01 PM

I have a 99 1mz harness and sensors. pm me your offer

DaveMush · 12-01-2007, 12:26 PM

you need the 02 side? or harness side?

Ben · 12-01-2007, 10:09 PM

I'll let you know if I come up on one from work. For a 1MZ right?

Oteck · 12-01-2007, 10:28 PM

I needed the plug from the sensor side. some1 already sent me one so thanks anyway guys

01-30-2007, 04:59 AM	#1 (permalink)
Oteck Eye'm the Str⑨ngest Join Date: Aug 2005 Location: Burnaby B.C. Posts: 4,947 Thanks: 12 Thanked 173 Times in 157 Posts Blog Entries: 3 iTrader Rating: (5/100% )	WTB: 4wire oxygen sensor Dead/alive Item Location: B.C. Canada I need the plugs on the sensor. doesn't have to be working since i have new ones comming. Normaly i would use my stock AFR sensors but the hydra only works on these heated oxygen sensors Thanks __________________ [Oteck's] Project car Garage Pending Projects 1mz/3mz VVTI Hybrid V6 \| LS430 Big Brakes \| Rotary Climate Control \| Power steering Commander \| Power Tilt & Telescopic Steering Column \| Completed Projects Stainless Door Sills \| Power Folding Mirrors \| Motorized/Steering Fog lamps \| Pedal Conversion \| LED Gauges \| Lexus Door Cover \| Sway bar Relocation Tab \| RFID Push Start

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-03-2007, 04:01 PM	#2 (permalink)
boobala RIDE OR DIE Join Date: Aug 2006 Location: NEW YORK Posts: 571 Thanks: 1 Thanked 8 Times in 8 Posts iTrader Rating: (27/100% )	I have a 99 1mz harness and sensors. pm me your offer

12-01-2007, 12:26 PM	#3 (permalink)
DaveMush Mr2 V6 #8 Join Date: Aug 2005 Location: Syracuse, Ny Posts: 413 Thanks: 0 Thanked 14 Times in 11 Posts iTrader Rating: (0/0% )	you need the 02 side? or harness side?

12-01-2007, 10:09 PM	#4 (permalink)
Ben Same In The End Join Date: Aug 2006 Location: Oceanside, CA / Reno, NV Posts: 4,274 Thanks: 20 Thanked 309 Times in 284 Posts My Google Map iTrader Rating: (16/100% )	I'll let you know if I come up on one from work. For a 1MZ right?

12-01-2007, 10:28 PM	#5 (permalink)
Oteck Eye'm the Str⑨ngest Join Date: Aug 2005 Location: Burnaby B.C. Posts: 4,947 Thanks: 12 Thanked 173 Times in 157 Posts Blog Entries: 3 iTrader Rating: (5/100% )	I needed the plug from the sensor side. some1 already sent me one so thanks anyway guys