Direct fire adapter for distributorless Toyota V6'es

Node · 05-05-2006, 08:50 AM

This module allows you to run the coil pack spark waste system found on a few Toyotas as a direct fire system. Basically in stead of 3 coil packs you can run 6. This does away with that mess of spark plug wires that run across the engine. The benefits are of course a much hotter spark to the front bank of plugs. And that translates to, no more misfires on the front bank Woot!

Contact me for more info and pricing for your application.
jim at v6mr2.com

Weasy2k · 05-05-2006, 12:12 PM

Are you using the stock 5vz coils?

Node · 05-05-2006, 05:34 PM

Double your set of stock VZ coils or you may use aftermarket parts. Its basically an ignitor with three more outputs.

Weasy2k · 05-05-2006, 08:24 PM

I need adapters made for the Coil over plug setup like the MZ's

I have them here and they are a 4 prong coilpack

Node · 05-06-2006, 01:44 PM

The 4 prong coil pack has the ignitor built into the unit itself. You can run the ignition signals direct from the ECU to those packs with no ill effects.

Come to think of it, I should sell a conversoin kit for the 5VZ that allows people to drop 6 of the MZ packs in. First Ill need to see if they fit.

Weasy2k · 05-06-2006, 09:21 PM

yes they do...i have them here

Hrmm i wonder then....

Node · 05-07-2006, 09:21 PM

Interesting, do they still bolt down or will I need to make a bracket to hold them in place?

Oteck · 05-07-2006, 11:54 PM

yeah i found weasy his set for under 35 bucks i think. Problem of ordering the plugs is that they don't have the water proofed pins, and when ordering from toyota expect to pay +$3usd a pin/wire

Weasy2k · 05-08-2006, 12:20 AM

they dont lock in no....

05-05-2006, 08:50 AM	#1 (permalink)
Node Mild Steel = Big Gains Join Date: Feb 2005 Location: WNC Posts: 1,277 Thanks: 0 Thanked 15 Times in 15 Posts My Google Map iTrader Rating: (2/100% )	Direct fire adapter for distributorless Toyota V6'es This module allows you to run the coil pack spark waste system found on a few Toyotas as a direct fire system. Basically in stead of 3 coil packs you can run 6. This does away with that mess of spark plug wires that run across the engine. The benefits are of course a much hotter spark to the front bank of plugs. And that translates to, no more misfires on the front bank Woot! Contact me for more info and pricing for your application. jim at v6mr2.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-05-2006, 12:12 PM	#2 (permalink)
Weasy2k What is an MR2? Join Date: Mar 2005 Location: Vancouver, BC Posts: 8,891 Thanks: 33 Thanked 82 Times in 68 Posts iTrader Rating: (9/100% )	Are you using the stock 5vz coils?

05-05-2006, 05:34 PM	#3 (permalink)
Node Mild Steel = Big Gains Join Date: Feb 2005 Location: WNC Posts: 1,277 Thanks: 0 Thanked 15 Times in 15 Posts My Google Map iTrader Rating: (2/100% )	Double your set of stock VZ coils or you may use aftermarket parts. Its basically an ignitor with three more outputs.

05-05-2006, 08:24 PM	#4 (permalink)
Weasy2k What is an MR2? Join Date: Mar 2005 Location: Vancouver, BC Posts: 8,891 Thanks: 33 Thanked 82 Times in 68 Posts iTrader Rating: (9/100% )	I need adapters made for the Coil over plug setup like the MZ's I have them here and they are a 4 prong coilpack

05-06-2006, 01:44 PM	#5 (permalink)
Node Mild Steel = Big Gains Join Date: Feb 2005 Location: WNC Posts: 1,277 Thanks: 0 Thanked 15 Times in 15 Posts My Google Map iTrader Rating: (2/100% )	The 4 prong coil pack has the ignitor built into the unit itself. You can run the ignition signals direct from the ECU to those packs with no ill effects. Come to think of it, I should sell a conversoin kit for the 5VZ that allows people to drop 6 of the MZ packs in. First Ill need to see if they fit.

05-06-2006, 09:21 PM	#6 (permalink)
Weasy2k What is an MR2? Join Date: Mar 2005 Location: Vancouver, BC Posts: 8,891 Thanks: 33 Thanked 82 Times in 68 Posts iTrader Rating: (9/100% )	yes they do...i have them here Hrmm i wonder then....

05-07-2006, 09:21 PM	#7 (permalink)
Node Mild Steel = Big Gains Join Date: Feb 2005 Location: WNC Posts: 1,277 Thanks: 0 Thanked 15 Times in 15 Posts My Google Map iTrader Rating: (2/100% )	Interesting, do they still bolt down or will I need to make a bracket to hold them in place?

05-07-2006, 11:54 PM	#8 (permalink)
Oteck Eye'm the Str⑨ngest Join Date: Aug 2005 Location: Burnaby B.C. Posts: 4,947 Thanks: 12 Thanked 173 Times in 157 Posts Blog Entries: 3 iTrader Rating: (5/100% )	yeah i found weasy his set for under 35 bucks i think. Problem of ordering the plugs is that they don't have the water proofed pins, and when ordering from toyota expect to pay +$3usd a pin/wire

05-08-2006, 12:20 AM	#9 (permalink)
Weasy2k What is an MR2? Join Date: Mar 2005 Location: Vancouver, BC Posts: 8,891 Thanks: 33 Thanked 82 Times in 68 Posts iTrader Rating: (9/100% )	they dont lock in no....