G/I: 00 avalon 1mz vvti wiring kit

Oteck · 05-20-2006, 02:23 AM

This is a feeler for now but i might jump into an EMS. This is ment for a 1mz vvti system only. see the list what you'll get. It's not 100% because it's lacking the a/t to m/t resistors which needs to be done on the engine harness (not selling) and the water temp relocation kit.

Hardware
+IS300 Transponder assembly w/ key
+00 Avalon ECU (may need to be flash for immobilizer)
+Mitch's tach adapter (water temp kit not included)
+Evap canister w/ vsv
+Vapor pressure sensor

Dash Harness (power everything except
+ODBII plug under steering colum near the stock fog light switch
+Ignition modified to suite the transponder assembly
+Cruise control linked through the kick panel
+Thors Car alarm (w/ 2 LCD remote's)
-no abs
-no antenna leads to rear quarter

Body Harness
+Relays for AFR sensors
+Starter relay relocated in fusebox
+fuse box plug modified for stock engine harness
+Power trunk link (aftermarket remote trunk for alarm)
+Horn linke (aftermarket alarm)
+/- 91 or 93 cluster pigtail for either mechanical or electrical speedo

Im looking for $2500 obo for all of this... im loosing alot on this already the harnesses and materials i had to buy doesn't even amount to that

Weasy2k · 05-29-2006, 01:31 AM

your going standalone now?!

05-20-2006, 02:23 AM	#1 (permalink)
Oteck Eye'm the Str⑨ngest Join Date: Aug 2005 Location: Burnaby B.C. Posts: 4,947 Thanks: 12 Thanked 173 Times in 157 Posts Blog Entries: 3 iTrader Rating: (5/100% )	G/I: 00 avalon 1mz vvti wiring kit This is a feeler for now but i might jump into an EMS. This is ment for a 1mz vvti system only. see the list what you'll get. It's not 100% because it's lacking the a/t to m/t resistors which needs to be done on the engine harness (not selling) and the water temp relocation kit. Hardware +IS300 Transponder assembly w/ key +00 Avalon ECU (may need to be flash for immobilizer) +Mitch's tach adapter (water temp kit not included) +Evap canister w/ vsv +Vapor pressure sensor Dash Harness (power everything except +ODBII plug under steering colum near the stock fog light switch +Ignition modified to suite the transponder assembly +Cruise control linked through the kick panel +Thors Car alarm (w/ 2 LCD remote's) -no abs -no antenna leads to rear quarter Body Harness +Relays for AFR sensors +Starter relay relocated in fusebox +fuse box plug modified for stock engine harness +Power trunk link (aftermarket remote trunk for alarm) +Horn linke (aftermarket alarm) +/- 91 or 93 cluster pigtail for either mechanical or electrical speedo Im looking for $2500 obo for all of this... im loosing alot on this already the harnesses and materials i had to buy doesn't even amount to that Last edited by Oteck; 05-20-2006 at 02:32 AM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-29-2006, 01:31 AM	#2 (permalink)
Weasy2k What is an MR2? Join Date: Mar 2005 Location: Vancouver, BC Posts: 8,891 Thanks: 33 Thanked 82 Times in 68 Posts iTrader Rating: (9/100% )	your going standalone now?!