mkii faq

EL PAALO · 02-23-2005, 12:05 PM

I'll do a faq shortly. Hopefully I'll get around to measuring a mki and mkiii so I'll be able to help with fitment on all mr2's, not just mkii's.
In the meantime, you can browse a ton of wheels on wheelspecs.com or look at wheels on mr2's on carpron.com.

DrakesKakes · 02-23-2005, 12:13 PM

Thanks Budddddy!

GReddySetGO · 02-23-2005, 01:27 PM

What kinda measurements do you need? I think I have a couple MKI's at the shop, or if they're not there, I'm sure I'll see one soon. MKIII's on the otherhand are a little harder to come by.

EL PAALO · 02-23-2005, 02:34 PM

I should have access to both on the 13th at the next autox, just a matter of me doing it.

place a level against the top edge of the fender (outermost point) and measure from a wheel with a known width and offset ....... record measurement in mm.
measure to most restrictive points on the inside as well and record measurements. not sure if height is an issue for the mki and mkiii like it is for the mkii up front so I'd be looking for height restrictions in regards to tire clearance as well.

GReddySetGO · 02-23-2005, 04:06 PM

Hmmm... sounds like something I'll f*** up

I'll let you know if I get a MKI in before the 13th though.

EL PAALO · 02-24-2005, 01:06 PM

cool, thanks. it's really simple, just takes a little time, a steady hand, and no ADD.

02-23-2005, 12:05 PM	#1 (permalink)
EL PAALO Wheels make the car. Join Date: Feb 2005 Location: San Marcos, TX Posts: 2,327 Thanks: 4 Thanked 53 Times in 51 Posts My Google Map iTrader Rating: (3/100% )	wheel/tire faq I'll do a faq shortly. Hopefully I'll get around to measuring a mki and mkiii so I'll be able to help with fitment on all mr2's, not just mkii's. In the meantime, you can browse a ton of wheels on wheelspecs.com or look at wheels on mr2's on carpron.com. __________________ WHEELSPECS.COM - a ridiculous number of wheel pics & links Last edited by EL PAALO; 02-23-2005 at 12:34 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-23-2005, 12:13 PM	#2 (permalink)
DrakesKakes Cream Filling! Join Date: Feb 2005 Location: Long Island Posts: 394 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	Thanks Budddddy!

02-23-2005, 01:27 PM	#3 (permalink)
GReddySetGO Forced Fed @ 20psi Join Date: Feb 2005 Location: Pasadena, CA Posts: 458 Thanks: 1 Thanked 2 Times in 2 Posts iTrader Rating: (6/100% )	What kinda measurements do you need? I think I have a couple MKI's at the shop, or if they're not there, I'm sure I'll see one soon. MKIII's on the otherhand are a little harder to come by.

02-23-2005, 02:34 PM	#4 (permalink)
EL PAALO Wheels make the car. Join Date: Feb 2005 Location: San Marcos, TX Posts: 2,327 Thanks: 4 Thanked 53 Times in 51 Posts My Google Map iTrader Rating: (3/100% )	I should have access to both on the 13th at the next autox, just a matter of me doing it. place a level against the top edge of the fender (outermost point) and measure from a wheel with a known width and offset ....... record measurement in mm. measure to most restrictive points on the inside as well and record measurements. not sure if height is an issue for the mki and mkiii like it is for the mkii up front so I'd be looking for height restrictions in regards to tire clearance as well.

02-23-2005, 04:06 PM	#5 (permalink)
GReddySetGO Forced Fed @ 20psi Join Date: Feb 2005 Location: Pasadena, CA Posts: 458 Thanks: 1 Thanked 2 Times in 2 Posts iTrader Rating: (6/100% )	Hmmm... sounds like something I'll f*** up I'll let you know if I get a MKI in before the 13th though.

02-24-2005, 01:06 PM	#6 (permalink)
EL PAALO Wheels make the car. Join Date: Feb 2005 Location: San Marcos, TX Posts: 2,327 Thanks: 4 Thanked 53 Times in 51 Posts My Google Map iTrader Rating: (3/100% )	cool, thanks. it's really simple, just takes a little time, a steady hand, and no ADD.