i have an 86 mk1 and am wanting to put a 20v silvertop in it. i have can get a 20v with 53000 on it out of a carrola with tranny, ecu, harness, a/c, powerstearing pump, halfshafts, shifter and linkage, and some other stuff i can\'t think of, basicly everything, besides the mounts, needed for the engine to run. how hard will the swap be, can i just fab mounts and have shafts cut, remove the old wiring, and use the wiring out of the corrola? or is it eaisier just to use the old tranny? thanks for the help, nate.

Print Save to list E-mail Comment (0) Subscribe Rate Article Helpful Not Helpful There are many members on the forums who have completed that swap that can help out.  Contact the forum member mr220v for some of his wiring setups.  He does a perfect job creating 20v harness.  http://www.mr2.com/forums/20v-swaps/

Comments (View All Comments / Add Comment) Related Articles All You Need to Know About Swapping a 20v by System [ Written by mr220v] Changes that need to be made to accommodate the 20v by system 1. Exhaust -Silvertop The complete 16v exhaust system can be used with the 20v... V6 How To-A Visual Aid [Written by Node] Removal of the stock motor 3S or 5S. Keep the parts organized, you will be using many on the V6 motor. Things to remember: Cap off coolent hoses... 1986 Mk1 4A-GE to GZE Engine Swap [Written by 86mister2] This is my engine swap write-up for a 1988 USDM 4A-GZE into a 1986 USDM Mk1. This swap is straight forward mechanically but the difficulty of...